RS PRO

RS PRO LCR Meter Chip Test Fixture　123-5978

RS Pro LCR Test Fixture, 4-Wire
The RS Pro test fixture for measuring axial and radial components is intended for use with the RS Pro LCR-6000 Series high-precision LCR meter.

RS PRO

RS PRO LCR Meter Chip Test Fixture　123-5979

RS Pro LCR Test Fixture, 4-Wire, Kelvin Clip The RS Pro Kelvin Clip Test Lead is intended for use with the RS Pro LCR-6000 Series High Precision LCR Meter.
Features and Benefits: Frequency: DC → 1 MHz Maximum Voltage: ±45 V

RS PRO

RS PRO LCR Meter Chip Test Fixture　123-5980

RS Pro LCR Test Fixture, 4-Wire, SMD/Chip Test Fixture The RS Pro SMD/Chip Test Fixture is intended for use with the RS Pro LCR-6000 series high precision LCR meter.
Features and Advantages: Frequency: DC → 10 MHz Maximum Voltage: ±45 V Applicable Size: 0201 → 1812

RS PRO

RS PRO LCR Meter Chip Test Fixture　123-5981

RS Pro LCR Test Fixture, External DC Bias Voltage Box
The RS Pro External DC Bias Voltage Box is used in conjunction with the RS Pro LCR-6000 Series High Precision LCR Meter. RS; 117-6718 117-6718 and; See 117-6776 117-6776 (calibrated version). This test fixture allows the DUT (device under test) to be measured with a maximum +/- 45 V dc bias.

RS PRO

RS PRO LCR Meter Chip Test Fixture　123-5982

RS Pro LCR Test Fixture, External DC Bias Current Box
The RS Pro external DC bias current box is used in conjunction with the RS Pro LCR-6000 series high precision LCR meter. RS; 117-6718 117-6718 and; See 117-6776 117-6776 (calibrated version). This test fixture allows the DUT (device under test) to be measured with a maximum +/- 2.5 A bias.

Megger

Megger DH5 Ohm Meter　1006-445

DLR010 Replacement Handspike Lead Sets. Duplex handspikes with sprung loaded tips. Maximum current capacity 10 A. 6mm spacing between ips on each probe. DH5 2.5m Duplex handspikes (2 off), one with indicator lights. Compatible with the Megger DLRO10X & DLRO10HD ohmmeters

Peak Electronic Design

Peak Electronic Design SMD03m LCR Meter Tweezers　SMD03m

Peak LCR40m Passive Component Analyser. The LCR40m will automatically identify inductors, capacitors and resistors, measuring the main component value and other componant details (e.g coil inductance and dc resistance). The LCR40m is ideal for unmarked and surface mount designs. Automatic component identification Automatic test frequency selection Delayed or instant analysis (for hands free operation) Non volatile probe and test lead compensation Automatic ranging and scaling with real units displayed Auto and manual power-off

Peak Electronic Design

Peak Electronic Design LLSm LCR Meter Adapter　LLSm

Peak LCR40m Passive Component Analyser. The LCR40m will automatically identify inductors, capacitors and resistors, measuring the main component value and other componant details (e.g coil inductance and dc resistance). The LCR40m is ideal for unmarked and surface mount designs. Automatic component identification Automatic test frequency selection Delayed or instant analysis (for hands free operation) Non volatile probe and test lead compensation Automatic ranging and scaling with real units displayed Auto and manual power-off

Peak Electronic Design

Peak Electronic Design PTP03m LCR Meter Probe Pack　PTP03m

Peak LCR40m Passive Component Analyser. The LCR40m will automatically identify inductors, capacitors and resistors, measuring the main component value and other componant details (e.g coil inductance and dc resistance). The LCR40m is ideal for unmarked and surface mount designs. Automatic component identification Automatic test frequency selection Delayed or instant analysis (for hands free operation) Non volatile probe and test lead compensation Automatic ranging and scaling with real units displayed Auto and manual power-off

BK Precision

BK Precision, Model BK878B LCR Meter 20mF, 10 MΩ, 1000h Handheld Type　BK878B

Banana to alligator test leads, 9V battery, mini USB interface cable, manual, AC adapter (879B only). 3. B ;K Precision 878B and 879B 40,000 Count Dual Display Handheld LCR Meters. B ;K Precision meter 878B ( ; 878-2189 878-2189 ) and 879B ( ; 878-2198 878-2198 ) are handheld LCR meters which measure inductance, capacitance and resistance quickly and precisely. The 879B can also calculate impedance, Theta and ESR. which is a feature typically found in bench LCR meters only. Measurement data can be continuously transferred to a PC using the mini USB interface. Featuring a tilt stand and dual display, it offers flexibility for viewing and operating, while an over-mold rubber case ensures durability in harsh industrial environments. Also includes banana to alligator test leads, 9V battery, mini USB interface cable, manual, and AC adapter. Features and Benefits:. 40,000 counts resolution on primary and 10,000 counts resolution on secondary display Automatic calculation of secondary parameters D, Q, Ɵ, ESR (Ɵ/ESR for 879B only) 0.5% basic accuracy Fast auto range design for rapid, easy component measurements Relative mode Data Hold and Min/Max/Average recording USB (Virtual COM) interface SCPI compliant commands for remote communication Selectable auto-power-off options

RS PRO

［Discontinued］RS PRO Component & IC Tester, Resistance Measurement Resolution 100mΩ, Capacitance Measurement Resolution 1pF Component　144-5340

ELC

［Out of stock］ELC DR 05 Decade Box, Decade Box Type Resistance, Resistance Resolution 1Ω, Best Maximum Resistance Accuracy ±1% 0.5W　DR 05

EN 61010-1. DR series resistive decade boxes. Resistive decade boxes with a typical accuracy of 1 %, adjustable via a rotary control. These decade boxes use metal film resistors, with an accuracy of 0.5 % and a temperature coefficient of 50 ppm / °C. Outputs on each decade via 4 mm safety sockets.

ELC

［Out of stock］ELC DR 07 Decade Box, Decade Box Type Resistance, Resistance Resolution 1Ω, Best Maximum Resistance Accuracy ±1% 0.5W　DR 07

EN 61010-1. DR series resistive decade boxes. Resistive decade boxes with a typical accuracy of 1 %, adjustable via a rotary control. These decade boxes use metal film resistors, with an accuracy of 0.5 % and a temperature coefficient of 50 ppm / °C. Outputs on each decade via 4 mm safety sockets.

Leap

［Discontinued］Leap Leaper-2 IC Tester IC 16 Char x 1 Row, LCD, Model Leaper-2　Leaper-2

Main unit User manual DC 9V/500mA power adaptor. Leaper-2 Portable linear/analogue IC tester. LEAPER-2 is a portable, small and light Linear IC Tester that provides auto detection function. Easy-operating, particularly designed for the linear IC Small, portable, light and power-saving, usable with batteries Average test time: 0.8 second Equipped with empty-load test, and Auto Power Off function Auto identify the unknown ICs and list the P/N of the IC which has same function

Time Electronic

［Out of stock］Time Electronic 1061 Decade Box, Decade Box Type Resistance, Resistance Resolution 1Ω, Best Maximum Resistance Accuracy　1061

Time Electronics Model 1061 Resistance Decade Box. Time Electronics 1061 is a low-cost, robust resistance decade box designed to meet requirements for educational and industrial applications. Metal film resistors with a 0.75W power rating are used throughout, conferring the advantages of stability and low temperature coefficient. Six large switches with clear numerical readout enhance ease-of-use. Slim-line design minimises take-up of bench space. 1% accuracy and wide range facilitate production or select-on-test usage. The case provides complete electrostatic screening. Resistance is selected by dialling the required value, using the rotary switches. This enables precise setting with clear unambiguous indication. Number of decades:6 Range/resolution 1.2 MΩ / 1Ω steps Accuracy ±1% In-line readout Low temperature coefficient, 100 ppm/°C Residual resistance <150 mΩ Power rating 0.75W per resistor Voltage Rating: Maximum 300 V DC/AC RMS Mechanically and electrically robust Front panel safety terminals (compatible with 4mm shrouded plugs, standard plugs, bare wires, spade terminals) Fully screened Dimensions 355(W) x 63(H) x 82(D) mm, weight 0.75kg

Time Electronic

［Out of stock］Time Electronic 1041 Decade Box, Decade Box Type Resistance, Resistance Resolution 0.01Ω, Best Maximum Resistance　1041

Time Electronics Model 1041 Low Ohm Decade Resistance Box. Time Electronics 1041 is a precision low ohm resistance box designed for general laboratory work, including platinum resistance thermometry. The 1041 is compact and durable. It is housed in a robust metal case with removable protective rubber cover which facilitates use not only in the laboratory but also in the field. Excellent accuracy is achieved through using high stability metal film resistors. The 5-digit thumbwheel switch enables simple and precise setting with a clear indication of the resistance value. Range/resolution 0 - 1kΩ / 0.01 Ω steps High accuracy Clear visual indication, using colour-coded digits High stability Low temperature coefficient 50 ppm/°C Safety terminals (compatible with 4mm shrouded plugs, standard plugs, bare wires, spade terminals) Residual resistance <60 mΩ Power Rating 1W per resistor Voltage Rating: Maximum 100 V DC/AC RMS Suitable for PRT/RTD Removable protective cover Dimensions 215(W) x 100(H) x 120(D) mm Weight 1kg

Cropico

［Discontinued］Cropico RM6-N3 Decade Box, Decade Box Type Resistance, Resistance Resolution 100Ω, Best Maximum Resistance Accuracy ±1%　RM6-N3

Calibration/Substitution, Compact 6 Decade Resistance Box. Compact, durable case manufactured from high impact polystyrene Metal film resistors and silver plated brass contact switches Particularly suitable for use in electrical and electronic industrial laboratories Required resistance selected by the 6 rotary switches An additional 1KΩ resistor is available at the terminals, enabling the user to make a simple divider

Gossen Metrawatt

［Out of stock］Gossen Metrawatt METRAOHM 413 9V Ohm Meter, Maximum Resistance Measurement 1999 kΩ, Resistance Measurement Resolution　M630A

METRAOHM 413, pluggable measurement lead, battery, operating instructions. Low-resistance measuring device METRAOHM 413. Overvoltage protection Signalling of external voltage: by LED, acoustic, measurement value Protection rating IP 65 Zero calibration of test leads Measurement range: 0.01 → 200 Ω. Digital low-resistance measuring device compliant with DIN VDE 0413 Part 4 and EN 61 557 Parts 1 and 4.

Cropico

［Out of stock］Cropico DO4000 AA Ohm Meter, Maximum Resistance Measurement 4 kΩ, Resistance Measurement Resolution 10μΩ,　DO4000

Handheld 4000 Series. True 4 terminal measurement to eliminate lead resistance errors 4000 count 15mm LCD screen with LED indicators Auto/manual range selection Enhanced accuracy with auto-average for forward and reverse measurement currents to eliminate error due to thermal emf True Zero button Auto power-off saves battery life Protected to IP54. Supplied with: 5 x AA alkaline batteries, measuring leads with Kelvin clips and instructions.

Megger

［Discontinued］Megger DLRO10HD 6V Sealed Lead-Acid Ohm Meter, Maximum Resistance Measurement 2500 μΩ, Resistance Measurement　1006-603

DH4 duplex handspikes with 1.2m lead length, test lead pouch (lid mounted) user guide on CD ,6V 7Ah sealed lead acid battery (fitted). DLRO10HD Heavy Duty 10A Low Resistance Ohmmeter. Heavy duty low resistance ohmmeter combining rugged construction with accuracy and ease of use. It features an internal rechargeable battery and can also operate from a mains supply, even if the battery is completely flat. 2 high power ( up to 25W) ranges ideal for inductive applications, and where heating a potential weakness is desirable 7 low power output ranges limited to 0.25W to avoid heating the test piece and to extend battery life. Rechargeable battery or line power supply, continuous operation, even with dead battery 10 A for 60 seconds, less time waiting to cool, great for charging inductance High input protection to 600 V, inadvertent connection to line or UPS voltage will not blow a fuse Heavy duty case: IP 65 lid closed, IP54 operational (battery operation only) Large backlit LCD is clear and easy to read in all lighting conditions. Rotary switch selects one of five test modes, including auto start on connection, giving ease of use. DH5 straight duplex handspike set with 2.5m long leads. See stock no. ; 666-7371 666-7371. Support accessories:

Cropico

［Out of stock］Cropico DO4002 AA Micro Ohm Meter, Maximum Resistance Measurement 400 Ω, Resistance Measurement Resolution 1μΩ,　DO4002

Handheld 4000 Series. True 4 terminal measurement to eliminate lead resistance errors 4000 count 15mm LCD screen with LED indicators Auto/manual range selection Enhanced accuracy with auto-average for forward and reverse measurement currents to eliminate error due to thermal emf True Zero button Auto power-off saves battery life Protected to IP54. Supplied with: 5 x AA alkaline batteries, measuring leads with Kelvin clips and instructions.

Cropico

［Discontinued］Cropico RBB5-B Decade Box, Decade Box Type Resistance, Resistance Resolution 0.01Ω, Best Maximum Resistance Accuracy　RBB5-B

Calibration/Substitution, High Accuracy 5 Decade Resistance Box. Compact, durable case of encapsulated moulded epoxy Constructed using low temperature coefficient resistor wire and gold plated contact switches Particularly suitable for use in electrical and electronic industrial laboratories Required resistance selected by the 5 rotary switches The -B model is suitable for pt100 simulation

Cropico

［Discontinued］Cropico RBB5-D Decade Box, Decade Box Type Resistance, Resistance Resolution 1Ω, Best Maximum Resistance Accuracy ±0.2%　RBB5-D

Calibration/Substitution, High Accuracy 5 Decade Resistance Box. Compact, durable case of encapsulated moulded epoxy Constructed using low temperature coefficient resistor wire and gold plated contact switches Particularly suitable for use in electrical and electronic industrial laboratories Required resistance selected by the 5 rotary switches The -B model is suitable for pt100 simulation

Cropico

［Discontinued］Cropico RBB6-B Decade Box, Decade Box Type Resistance, Resistance Resolution 0.001Ω, Best Maximum Resistance Accuracy　RBB6-B

Calibration/Substitution, High Accuracy 6 Decade Resistance Box. Compact, durable case of encapsulated moulded epoxy Constructed using low temperature coefficient resistor wire and gold plated contact switches Particularly suitable for use in electrical and electronic industrial laboratories Required resistance selected by the 6 rotary switches The -B and -C models are suitable for pt100 simulation

Cropico

［Discontinued］Cropico RBB6-C Decade Box, Decade Box Type Resistance, Resistance Resolution 0.01Ω, Best Maximum Resistance Accuracy　RBB6-C

Calibration/Substitution, High Accuracy 6 Decade Resistance Box. Compact, durable case of encapsulated moulded epoxy Constructed using low temperature coefficient resistor wire and gold plated contact switches Particularly suitable for use in electrical and electronic industrial laboratories Required resistance selected by the 6 rotary switches The -B and -C models are suitable for pt100 simulation

Cropico

［Discontinued］Cropico RBB6-F Decade Box, Decade Box Type Resistance, Resistance Resolution 10Ω, Best Maximum Resistance Accuracy　RBB6-F

Calibration/Substitution, High Accuracy 6 Decade Resistance Box. Compact, durable case of encapsulated moulded epoxy Constructed using low temperature coefficient resistor wire and gold plated contact switches Particularly suitable for use in electrical and electronic industrial laboratories Required resistance selected by the 6 rotary switches The -B and -C models are suitable for pt100 simulation

ELC

［Out of stock］ELC DL 07 Decade Box, Decade Box Type Inductance　DL 07

Inductance decade box. Inductance box with 7 highly accurate decades, adjustable via a rotary control. 7 decades: ( x 1 μH, x 10 μH, x 100 μH, x 1 mH, x 10 mH, x 100 mH, x 1 H) 4 mm safety sockets for banana plugs. Available in calibrated version.

ELC

［Out of stock］ELC DR 04 Decade Box, Decade Box Type Resistance, Resistance Resolution 1Ω, Best Maximum Resistance Accuracy ±1% 0.5W　DR 04

EN 61010-1. DR series resistive decade boxes. Resistive decade boxes with a typical accuracy of 1 %, adjustable via a rotary control. These decade boxes use metal film resistors, with an accuracy of 0.5 % and a temperature coefficient of 50 ppm / °C. Outputs on each decade via 4 mm safety sockets.

ELC

［Out of stock］ELC DC 05 Decade Box, Decade Box Type Capacitance　DC 05

EN 61010-1. 1 % capacitance decade box. 1 % capacitance decade box, adjustable via a rotary control. 5 decades: 100 pF, 1 nF, 10 nF, 100 nF, 1 μF. The DC05 decade box uses polystyrene and polypropylene condensers, providing high accuracy, a low temperature coefficient (125ppm/°C) and very high insulation resistance. Outputs on each decade via 4 mm safety sockets. Discharge pushbutton. Available in a calibrated version.