Castle

Castle MK579DP1B Sound Level Meter Dosemeter Microphone, For Use With GA116L, GA216L　01MK579DP1B

Castle MK579DP1B Plug-in Dosemeter Microphone for GA116L. Castle plug-in dosemeter microphone MK579DP1B is an optional accessory for Castle Sonus sound meter GA116L. By using the MK579DP1B, the GA116L can be used as a personal sound exposure meter (Dosemeter). This cable and microphone accessory plugs directly into the microphone socket on the GA116L.

Showa Sokki Corporation

Vibro Recorder　9801

It can be connected to a vibrometer for easy waveform recording.
Can be recorded on a C F card and transferred to a personal computer.

Showa Sokki Corporation

CF Card　9803-73

A CF card for use with a vibro recorder. The vibro recorder cannot store vibration waveforms without a CF card.

Showa Sokki Corporation

Battery Pack　9780

Battery pack used for vibro recorder.
Vibrorecorders cannot be charged without a battery pack.

Showa Sokki Corporation

Vibro Recorder set (for 1332B)　9801-T01

1332B data recording set.
Connecting to the 1332B for easy waveform recording

RS PRO

［Discontinued］RS PRO Digital Sound Level Meter 8kHz　146-4650

RS PRO

［Discontinued］RS PRO Digital Sound Level Meter 8kHz　146-4651

Chauvin Arnoux

［Out of stock］Chauvin Arnoux CA 832 Sound Level Meter 35 → 130 dB　P01185501Z

C.A 832 Recording Sound Level Meter. In a compact case protected by an impact resistant sheath, the C.A 832 tests noise levels between 35 and 130 dB. 3 measurement ranges. 2 integration times / 2 weighting curves. Hold function. Analogue output. Backlit display. 2000-point display.

Castle

［Discontinued］Castle GA 113 Digital Sound Level Meter 20kHz　GA113

For compliance with the Noise at Work regulations and relevant international standards, sound level meters should be calibrated before use and checked afterwards. See later in this section for GA607 acoustic calibrator (stock no. < 479-2034') 479-2034. A kit case (KA010, stock no. < 229-9454') 229-9454 for protecting your GA113 and GA60766 is also available. GA113 Class 1 Integrating Sound Level Meter. Designed for Industrial Safety Officers, Safety Managers and Engineers for compliance with the Health and Safety at Work Act; Noise at Work regulation 1989. Will provide necessary information for completing risk assessments. Integrated equivalent level (Ieq) measurement Personal sound exposure level (Lex or Lep d) measurement DOSE%, Projected DOSE% and Projected Lex functions Sound pressure (Lp) to 0.1dB resolution A and C frequency weighting (toggle) Slow and Fast Time constraints (toggle) Simultaneous measurement of Lp, Leq, Lmax and Pmax Lmax – maximum LP hold (rms) Pmax – maximum peak level Elapsed time (running time hrs, min, sec) Overload and under-range indication Battery condition (Life approx. 24 hrs) Optional extra: Plug-in Dosemeter microphone to convert the GA113 into a Dosemeter (stock no. < 479-2056') 479-2056. Dosemeter Microphone. Converts GA113 Sound Level Meter into a personal sound exposure meter (dosemeter) Includes Class 2 (Type 2) microphone When fitted, meter complies with IEC 61252:1993. Note: This instrument is supplied with a 1-year warranty and factory calibration from the date of manufacture. A free 3-year warranty extension is available subject to annual calibration being maintained.

Castle

［Discontinued］Castle GA607 Sound Level Calibrator 104 dB, 94 dB 1kHz　GA607

GA607. Class 1 sound level meter calibrator Produces 94dB and 104dB at 1kHz Designed for use on most of our sound level meters with 1/2 in. microphones Suitable for all Castle sound level meters and exposure meters

Amprobe

［Discontinued］Amprobe SM 10 Sound Level Meter 8kHz 35 → 130 dB　SM-10

Carry case, windscreen, user manual and 9 V battery. SM-10 sound level meter. Designed to meet the requirements of those working in the safety and testing sector A and C weightings for checking compliance with safety regulations and acoustic analysis Measuring ranges: A weighting 30 → 130 dB C weighting 35 → 130 dB Frequency range: 31.5 Hz → 8 KHz Display with 0.1 dB steps on 4-digit LCD Slow (1 sec) and fast (125 ms) response time settings to check peak and average noise levels MAX/MIN recording Data Hold to freeze readings on the display

Casella Cel

［Discontinued］Casella Cel CEL-120/2 Sound Level Calibrator 114dB 1kHz　CEL-120/2

IEC 6094: 2003 and ANSI S1.40: 2006. CEL-120 Class 2 Acoustic Calibrator. The CEL-120/2 is a Class 2 accuracy Acoustic Calibrator and is the smallest of its type in the world; with a rugged, over-moulded design for use in field environments. The field calibration of sound level meters is an essential procedure when carrying out any type of noise survey both before and after each measurement sequence. This ensures that sound level measuring instruments are providing consistently accurate readings necessary for monitoring to ensure compliance with workplace and environmental noise regulations. The CEL-120/2 is therefore designed and manufactured to comply with the requirements of IEC 60942: 2003 and ANSI S1.40: 2006. These standards stipulate accurate calibration over a wide range of temperature, humidity and pressure conditions, typical of field work, ensuring accurate calibration in all conditions.

Castle

［Discontinued］Castle Sound Level Meter 20kHz 35 → 140 dB　GA216B

IEC 61672-1:2002 Class 2, IEC 60651: 1979 Type 2. 1. Castle GA216B Sonus Class 2 Sound Pressure Level Meter (non data logging version). Castle GA216B is designed for general survey health ; safety and engineering applications by industrial safety officers, occupational nurses, fire alarm installation ; test engineers and industrial engineers. It gives clear results which meet the requirements of international standards. GA216B is a Sonus range entry-level Type 2 sound meter fully compliant with IEC 61672-1:2002. The difference between Type 1 and Type 2 is in the tolerance, for example: at reference frequency 1kHz, tolerance is ±1.1dB (Type 1) and ±1.4dB (Type 2); at 20Hz, tolerance is ±2.5dB (Class 1) and ±3.5dB (Class 2). Compliance with IEC 61672-1:2002 Class 2 and IEC 60651:1979 Type 2 is necessary for carrying out most noise assessment tasks in industry. Sound Pressure (Lp) to 0.1 dB resolution 'A' and 'C' frequency weighting (toggle) 'Slow' and 'Fast' Time weighting (toggle) Simultaneous measurement of Lp, Lmax, and Cpeak Lmax - maximum Lp hold (rms) Cpeak - maximum peak level Elapsed time (running time hrs, min, sec) Over Load and Under Range indication Housed in tough, crack-resistant ABS plastic Dimensions 60mm x 30mm (excluding pocket clip) x 135mm (210mm with microphone) Weight 200g (without battery)

Castle

［Discontinued］Castle GA2008 Vibration Meter　01GA2008

Accelerometer, cable, spike probe, magnet, case. Castle GA2008 Exilis General Purpose Pocket Vibration Meter. Castle GA2008 is a small, lightweight, reliable instrument providing all the fundamental vibration measurements in a single key stroke, at an economical price. It is designed for production managers, maintenance engineers and anyone carrying out condition-monitoring tasks. Integral mechanical and linear filters Data-logging of 9 data points Acceleration, Velocity & Displacement parameters Measurement in rms, Max rms and peak values Can be used in conjunction with a sound level meter to trace the source of a sound

Castle

［Discontinued］Castle Sound Level Meter 20kHz 67 → 140 dB　GA257B

IEC 61252:1993. Castle GA257B Sonus Personal Noise Exposure Meter. Castle GA257B is a high specification personal sound exposure meter fully compliant with IEC 61252-1. It is designed for industrial safety officers and safety managers, for compliance with The Control of Noise at Work regulations 2005 , and is especially suited for users who move around in the execution of their work. This meter gives simultaneous Lex (sound exposure) and peak measurement for assessments to the Control of Noise at Work Regulations 2005. It has a high specification measurement microphone and is cased in tough, crack-resistant ABS plastic. Simultaneous measurement of Lp, Leq, Zpeak, Lep,d, Dose, Dose / Hour, Pa2H 'A' frequency weighting 'Slow' Time weighting Sound pressure (Lp) to 0.1dB resolution Integrated equivalent level (Leq) measurement Personal sound exposure level (Lep,d) Noise dose%, Noise dose per hour%, Pascal squared hours Zpeak - maximum Z weighted peak level Elapsed time (running time hrs, min, sec) Over Load and Under Range indication Housed in tough, crack resistant ABS plastic Dimensions 60mm x 30mm (excluding pocket clip) x 135mm (210mm with microphone) Weight 200g (without battery)

Castle

［Discontinued］Castle Sound Level Meter 20kHz　GA216I

IEC 61672-1:2002 Class 2, IEC 60651: 1979 Type 2, IEC 60804: 2001 Type 2. Castle GA216i Sonus Class 2 Integrating Sound Level Meter. The Castle GA216i is designed for industrial safety officers, safety managers and engineers, for compliance with the Control of Noise at Work Regulations 2005. It will provide all necessary information for completing risk assessments. The feature-packed instrument is fully compliant with IEC 61672-1:2002 Class 2, IEC 60651: 1979 Type 2 and IEC 60804: 2001 Type 2. This meter gives simultaneous Leq (rms average) and peak measurement for assessments to the Noise at Work Regulations 1989 and general engineering applications. Simultaneous measurement of Lp, Leq, Lmax, Cpeak, Lep,d and LAE 'A' and 'C' Frequency weighting (toggle) 'Slow' and 'Fast' Time constants (toggle) Sound pressure (Lp) to 0.1dB resolution Integrated equivalent level (Leq) measurement Personal sound exposure level (Lep,d) Single event sound exposure level (LAE) Lmax - maximum Lp (rms) level Cpeak - maximum C weighted peak level Elapsed time (running time hrs, min, sec) Over Load and Under Range indication Housed in tough, crack-resistant ABS plastic

Castle

［Discontinued］Castle Digital Sound Level Meter 20kHz　GA116I

IEC 61672-1:2002 Class 1, IEC 60651: 1979 Type 1, IEC 60804: 2001 Type 1. Castle GA116i Sonus Class 1 Integrating Sound Level Meter. The GA116i is designed for industrial safety officers, safety managers and engineers, for compliance with the Control of Noise at Work regulations 2005. It is fully compliant with European and International standards. The GA116i will provide all necessary sound measurement information for completing noise at work risk assessments. Simultaneous measurement of Lp, Leq, Lmax, Cpeak, Lep,d, LAE, Dose, Dose / Hour, Pa2H 'A' and 'C' frequency weighting (toggle) 'Slow' and 'Fast' Time constants (toggle) Sound pressure (Lp) to 0.1dB resolution Integrated equivalent level (Leq) measurement Personal sound exposure level (Lep,d) Single event sound exposure level (LAE) Noise dose%, noise dose per hour%, pascal squared hours Lmax - maximum Lp (rms) level Cpeak - maximum C weighted peak level Elapsed time (running time hrs, min, sec) Over Load and Under Range indication Housed in tough, crack-resistant ABS plastic

Castle

［Discontinued］Castle L Sound Level Meter　GA216L

dBdataLITE PC software. The dBdataLITE PC software (supplied) enables USB Download direct from instrument and offers simple, visual display of data. Castle GA216L Sonus Class 2 Data-logging Sound Level Meter. Castle GA216L is fully compliant with European and International standards. It is designed for use by industrial safety officers, safety managers and engineers, for compliance with the Control of Noise at Work regulations 2005. GA216L will provide all the necessary sound measurement information for completing noise at work risk assessments. Multiple file saving using on board Flash Memory Dual channel measurements for Lp, Leq and Lmax Simultaneous measurement of Lp, Leq, Lmax, Apeak or Cpeak or Zpeak, Lep,d, LAE, Dose, Dose / Hour, Pa2H, L10, L90 and L(user) Channel independent Frequency weighting selection A , C or Z Channel Independent Time weighting selection Slow , Fast or Impulse Sound pressure (Lp) to 0.1dB resolution Integrated equivalent level (Leq) measurement Personal sound exposure level (Lep,d) Single event sound exposure level (LAE) Percentile levels (L10, L90 and a user selectable level) Noise dose%, noise dose per hour%, pascal squared hours Lmax - maximum Lp (rms) level Apeak, Zpeak or Cpeak – maximum Frequency weighted peak level Elapsed time (running time hrs, min, sec) Interval period Over Load and Under Range indication Housed in tough, crack resistant ABS plastic

Castle

［Discontinued］Castle E Sound Level Meter 19 → 133 dB　GA116E

dBdataLITE PC software. Castle GA116E Sonus Class 1 Environmental Data-logging Sound Level Meter. Fully compliant with European and International standards, the GA116E is designed for environmental managers, environmental health officers and pollution control professionals. The GA116E measures environmental noise parameters to assist with compliance of British, European and International standards, codes of practice and legislation. The Sonus E is supplied with dBdataLITE PC software to download results for subsequent analysis. Multiple file saving using on board Flash memory Dual channel measurements for Lp, Leq and Lmax Simultaneous measurement of Lp, Leq, Lmax, Apeak or Cpeak or Zpeak, LAE, L10, L90 and L(user) Channel independent Frequency weighting selection A , C or Z Channel independent Time weighting selection Slow , Fast or Impulse Sound pressure (Lp) to 0.1dB resolution Integrated equivalent level (Leq) measurement Single event sound exposure level (LAE) Percentile levels (L10, L90 and a user selectable level) Lmax - maximum Lp (rms) level Apeak, Zpeak or Cpeak – maximum Frequency weighted peak level Elapsed time (running time hrs, min, sec) Interval period Over Load and Under Range indication Housed in tough, crack-resistant ABS plastic

Castle

［Discontinued］Castle L Sound Level Meter　GA116L

IEC 61672-1:2002 Class 1, IEC 60651: 1979 Type 1, IEC 60804: 2001 Type 1. dBdataLITE PC software. Castle GA116L Sonus Class 1 Data-logging Sound Level Meter. Castle GA116L is designed for industrial safety officers and safety managers, for compliance with The Control of Noise at Work regulations 2005. It is fully compliant with European and International standards. The GA257L is supplied with dBdataPro LITE PC software for downloading data from the instrument. Multiple file saving using on board Flash memory Dual channel measurements for Lp, Leq and Lmax Simultaneous measurement of Lp, Leq, Lmax, Apeak or Cpeak or Zpeak, Lep,d, LAE, Dose, Dose / Hour, Pa2H, L10, L90 and L(user) Channel independent Frequency weighting selection A , C or Z Channel independent Time weighting selection Slow , Fast or Impulse Sound pressure (Lp) to 0.1dB resolution Integrated equivalent level (Leq) measurement Personal sound exposure level (Lep,d) Single event sound exposure level (LAE) Percentile levels (L10, L90 and a user selectable level) Noise dose%, noise dose per hour%, pascal squared hours Lmax - maximum Lp (rms) level Apeak, Zpeak or Cpeak – maximum Frequency weighted peak level Elapsed time (running time hrs, min, sec) Interval period Over Load and Under Range indication Housed in tough, crack-resistant ABS plastic