Showa Sokki Corporation

Vibro Switch　MODEL-1500B

Small vibration monitoring switch with integrated sensor, amplifier and relay.
Alarm level can be set in the range of 1~99% at 2 alarm relay contacts.

Showa Sokki Corporation

Digital Shock and Vibration Accelerometer　MODEL-1340B

Ultra-compact, easy-to-operate impact and vibration accelerometer.
It is very small and light, so it is convenient to carry with excellent workability.

Showa Sokki Corporation

Portable Vibrometer DIGI-VIBRO　MODEL-1332B

Handy type portable vibrometer.
Vibration measurement is easy for anyone. Ultra-compact, simple, practical and speedy measurement.

Showa Sokki Corporation

Portable Balancer　MODEL-7102B

A strobe type field balancer that can easily measure the balance of a rotating machine.
There is an output terminal for monitoring and waveform observation and recording are possible.

Showa Sokki Corporation

Portable Vibrometer DIGI-VIBRO (Large Input Type) and others

Showa Sokki Corporation

Low-noise Cable 1.5m for DIGI-VIBRO and others

Showa Sokki Corporation

Curl Cable for DIGI-VIBRO　LNC-3F-CC

A curl cable that can be used for 1332B series devices other than lightweight sensor types.
When you want to use a curl cable on the 1332B.

Showa Sokki Corporation

Magnet for DIGI-VIBRO and others

Showa Sokki Corporation

L Contact Pin for DIGI-VIBRO and others

Showa Sokki Corporation

3.5 phi-BNC Output Cable　9803-97

Output cable for 1332B.
You can output AC from the 1332B and load it into the recorder.

Showa Sokki Corporation

Vibro Recorder　9801

It can be connected to a vibrometer for easy waveform recording.
Can be recorded on a C F card and transferred to a personal computer.

Showa Sokki Corporation

CF Card　9803-73

A CF card for use with a vibro recorder. The vibro recorder cannot store vibration waveforms without a CF card.

Showa Sokki Corporation

Battery Pack　9780

Battery pack used for vibro recorder.
Vibrorecorders cannot be charged without a battery pack.

Showa Sokki Corporation

BNC-BNC Output Cable　9803-95

BNC- An output cable for a vibro recorder connected by BNC.
Since it is BNC-BNC, it can be used with other products.

Showa Sokki Corporation

Clip-BNC Output Cable　9803-96

Clip — An output cable for a vibro recorder connected by a BNC.

Showa Sokki Corporation

Conversion Connector　BNCP-C25J

Connector for converting 10-32 to BNC.

Showa Sokki Corporation

Carrying Case for vibro recorder　9782

This optional special case fits the vibro recorder set perfectly.

Showa Sokki Corporation

FFT analysis software　9803-90

This software enables waveform display and frequency analysis of data recorded with a Vibrorecorder or Vibroview on a personal computer.
1/3 Octave band analysis function is provided.

Showa Sokki Corporation

Piezo-electric acceleration sensor and others

Showa Sokki Corporation

Portable Vibrometer Mini Vibrometer　1022A

Compact and lightweight analog meter type portable vibrometer.
Vibration measurement of rotating machinery and reciprocating machinery can be accurately performed.

Showa Sokki Corporation

Magnet for Mini Vibro (for 1022A)　MG-2

Magnet that can be used for 1022 A.

Showa Sokki Corporation

Mini Vibro Sensor Cable (for 1022A)　CA2411-1

Sensor cable for use with 1022 A.

Showa Sokki Corporation

Vibrometer for Low Frequency Mini Vibro for Low Frequency　1422A

Handy size, portable low frequency vibrometer from 2Hz.
Vibrometer developed for low frequency vibration measurement.

Showa Sokki Corporation

Vibro Recorder set (for 1332B)　9801-T01

1332B data recording set.
Connecting to the 1332B for easy waveform recording

Showa Sokki Corporation

Vibro Converter (accelerometry) and others

Showa Sokki Corporation

AC output vibration sensor for PLC　2507

Standard cable is 3 meters.
Vibration sensor specialized for PLC (programmable logic controller) connection. Outputs waveform signals of vibration acceleration with high accuracy detection.

Showa Sokki Corporation

Digital Monitor　2590C-A11

This digital vibration monitor can be combined with vibration converter 2502 series to easily measure and monitor vibration.
It receives a signal of 4~20 mA and can be scaled.

Showa Sokki Corporation

Magnet for Vibro Converter　MG-6

Special magnet for vibro converter 2502 series.

Showa Sokki Corporation

Vibro Converter Monitor Set (Accelerometry) and others

Showa Sokki Corporation

Sensor amplifier for PLC　9401-02

Vibration sensor amplifier developed for PLC (Pluggable Logic Controller) which aggregates IoT data.
It can be combined with various vibration sensors suitable for various applications and environments, and passes high-precision vibration waveform information to the PLC in real time.

Showa Sokki Corporation

Accelerometer with built-in amplifier and others

Showa Sokki Corporation

Sensor Cable for PLC sensor amplifier (for 2470 and 2479-9401) 5m and others

Showa Sokki Corporation

Output Cable for PLC sensor amplifier (for 9401)　CA2153-1

This output cable connects the 9401 inch model to the PLC.

Showa Sokki Corporation

Portable Shaker for calibration　8100

It is a vibrator for easily calibrating vibration sensors and vibration meters in the field.
The vibrator, oscillator and vibrometer are compactly integrated.

Showa Sokki Corporation

Vibration Measuring device for elevator　6601

Vibration measurement equipment conforming to ISO's elevator diagnostic standards.
This equipment is put on the elevator, and the data is acquired and analyzed by the PC.

Showa Sokki Corporation

Portable Balancer (one-sided modification set) and others

Showa Sokki Corporation

Balance Correction Calculator　CAL-40

It is a small computer equipped with a special program for balance correction.
You can calculate the weight and mounting position of the balance weight simply by entering each parameter numerically according to the screen display.

Showa Sokki Corporation

Vibration Detector for earthquake monitoring　2702

It is a vibration detector for monitoring ground motion.
3 direction vector of XYZ The combined vibration acceleration is output at DC4-20 mA.

Showa Sokki Corporation

［Discontinued］Earthquake monitoring Vibration detector Digital Monitor Set　MODEL2702D1

3 direction vector of XYZ The combined vibration acceleration is output 4-20 mA.
Display and alarm output are performed on the digital monitor 2590B.