Showa Sokki Corporation

65-5603-94　Vibrometer for Low Frequency Mini Vibro for Low Frequency　1422A

Features

Handy size, portable low frequency vibrometer from 2Hz.
Vibrometer developed for low frequency vibration measurement.
Because of its small size and light weight, it is convenient to carry and measure in the field.
Acceleration, velocity and displacement can be measured.
Vibration frequency analysis is possible with the built-in filter.
It is suitable for low-frequency (2 Hz to 100 Hz) vibration measurement of low-speed rotating machines, building floors and bridges.
Because of the analog meter formula, you can see the fluctuation well.
The detector is easy to set because it has a magnet for suction.
There is an output for recording, so you can connect the recorder, oscilloscope, FFT analyzer, etc.
The horizontal and vertical directions can be measured by changing the orientation of the detector.
For vibration measurement of equipment such as water turbines, pumps and blowers at low rpm.

Measuring full scale range (switchable in 10 dB step 5 range): Acceleration: 0.3, 1, 3, 10, 30 m/s2 Peak
Speed: 0.1, 0.3, 1, 3, 10 cm/sRMS
Displacements: 0.1, 0.3, 1, 3, 10 mmp-p
Accuracy: Within 3% at sinusoidal 80 Hz, 10 mm/sRMS
Frequency response (Hz): Within 2 ~ 100 +/- 5%
Frequency of analysis (Hz): x 1: 1 ~ 10, x 10: 10 ~ 100
Set contents: 1 body (MODEL -1422 A), 1 vibration detector (MODEL -2400 A), 1 sensor cable 3 m, 1 output cable 1 m, 1 magnet (MG -4), 1 dry battery 6F 22 (9 V), 1 portable aluminum case, 1 instruction manual,
Body mass (g): 750
Power: AC +/- 1 V (full scale)
Power supply: 1 dry battery 6 F 22 (9 V)
Temperature range (deg. C): Use: 0 ~ 50, Storage: - 20 ~ 70
Dimensions (W x H x D) (mm): 85 x 190 x 55
Detector: MODEL -2400 A
Battery life (continuous time): 24 hours or more

Order No.	65-5603-94
Model No.	1422A
JAN Code	4582203470287
Standard price	JPY: 304,000 USD: 1,905.60 Excange rate 1USD= 159.53JPY Valid price in Japan
Quantity	1unit
Stock in Japan
Supplier Stock