Introduction Textbook To The Oscilloscope　AKE-2001

A good introduction to the basics of oscilloscopes.
It covers proper handling of the oscilloscope, basic operations, technical terms and prior knowledge.

Tektronix

Tektronix Mixed Signal Oscilloscope GPIB to USB Adapter, Model TEK USB-488 for use with DPO4000 Series　TEK-USB-488

Adapters, 2 USB Cables, User Manual • GPIB and USB Adapters • The TEK-USB-488 is an adapter for communication between a GPIB bus controller and the USB port of a Tektronix instrument that conforms to the USBTMC-USB488 standard.
GPIB control of Tektronix instrument via USB port on Tektronix instrument USBTMC-USB488 standard compliant GPIB primary address can be set from host Tektronix instrument Power from USB host or optional external power supply LED indicator displays power, adapter status, USB status

RS PRO

RS PRO Soft Carrying Case　122-5407

GSC-008 Soft Carrying Case for IDS 200 A/IDS 3000 Oscilloscope

RS PRO

RS PRO IDS1102B Bench Digital Storage Oscilloscope, 100MHz, 2 Channels　123-3542

Passive Probe, Power Cord, User Manual, OpenWave Software (Free Download), USB and LabView Drivers (Free Download) • RS Pro IDS-1000B Series Visual Persistence Oscilloscope • RS Pro IDS-1000B Series Digital Storage Oscilloscope is a versatile measuring instrument with outstanding features.　These products use Visual Persistence Oscilloscope (VPO) technology.　Since you are using a high-density IC to perform hardware acceleration, all the data you get is displayed as a waveform image.　With the 256 color gradient display function, the waveform details are displayed as a gradient while the analog signal changes at any time.　The memory length is sufficient to clearly identify the details of the measured signal.　The clear spectrum obtained in FFT mode is comparable to the quality obtained with a spectrum analyzer.　The Zero Key feature allows you to restore the previous waveform position and settings.　Trigger types include Edge, Pulse, Width, Video, ALT, Min, Rise/Drop, Event Delay, Time Delay, Timeout, Logic, RS232, I2C, and SPI.　All in a compact (380 x 208 x 127.3 mm) enclosure designed for portability and ease of use.
Features and Benefits: Sampling Rate: Up to 1 GSa/sMemory Depth: Up to 10 M7 800 x 480 WVGA LCD 256 Color Gradient Display Enhances Waveform Performance with 1 Mpts FFT Frequency Domain Signal Display Horizontal Time, Vertical Voltage, Zero Key for Triggers Compact and Innovative Design, Waveform Update Speed: 50,000 wfms/s

RS PRO

RS PRO IDS1104B Portable Digital Storage Oscilloscope, 100MHz, 4 Channels　123-3543

Passive Probe, Power Cord, User Manual, OpenWave Software (Free Download), USB and LabView Drivers (Free Download) • RS Pro IDS-1000B Series Visual Persistence Oscilloscope • RS Pro IDS-1000B Series Digital Storage Oscilloscope is a versatile measuring instrument with outstanding features.　These products use Visual Persistence Oscilloscope (VPO) technology.　Since you are using a high-density IC to perform hardware acceleration, all the data you get is displayed as a waveform image.　With the 256 color gradient display function, the waveform details are displayed as a gradient while the analog signal changes at any time.　The memory length is sufficient to clearly identify the details of the measured signal.　The clear spectrum obtained in FFT mode is comparable to the quality obtained with a spectrum analyzer.　The Zero Key feature allows you to restore the previous waveform position and settings.　Trigger types include Edge, Pulse, Width, Video, ALT, Min, Rise/Drop, Event Delay, Time Delay, Timeout, Logic, RS232, I2C, and SPI.　All in a compact (380 x 208 x 127.3 mm) enclosure designed for portability and ease of use.
Features and Benefits: Sampling Rate: Up to 1 GSa/sMemory Depth: Up to 10 M7 800 x 480 WVGA LCD 256 Color Gradient Display Enhances Waveform Performance with 1 Mpts FFT Frequency Domain Signal Display Horizontal Time, Vertical Voltage, Zero Key for Triggers Compact and Innovative Design, Waveform Update Speed: 50,000 wfms/s

RS PRO

RS PRO IDS2204E Portable Digital Storage Oscilloscope, 200MHz, 4 Channels　123-3553

Switchable Passive Probes (1 per channel), Quick Start Guide, User Manual (on CD-ROM), Power Cord
PC Software (OpenWave Software) and Drivers (USB driver, LabView driver) available for free download

RS PRO

RS PRO Soft Carrying Bag　123-6470

RS Pro RS BAG-SCC Soft Carrying Case
The RS BAG-SCC soft carrying bag (black) can be used in conjunction with the RS Pro RSDS1000CFL Series Digital Storage Oscilloscope and the RS Pro RSSA3000X Series Spectrum Analyzer.

RS PRO

RS PRO IDS2202A Bench Digital Storage Oscilloscope, 200MHz, 2 Channels　124-1953

User Manual CD, Quick Start Guide, Power Cord, Switchable Passive Probes (1 per channel)
RS Pro IDS-2000A Series Visual Persistence Oscilloscope

RS PRO

RS PRO IDS2202E Bench Digital Storage Oscilloscope, 200MHz, 2 Channels　124-1956

Switchable Passive Probes (1 per channel), Quick Start Guide, User Manual (on CD-ROM), Power Cord
PC Software (OpenWave Software) and Drivers (USB driver, LabView driver) available for free download

Chauvin Arnoux

Chauvin Arnoux P01102153Z Test Probe, For Use With CA 755 Digital Testers, CA 757 Digital Testers　P01102153Z

Chauvin Arnoux Test Probe
The removable test probe can be replaced to meet the application and measurement conditions.

Chauvin Arnoux

Chauvin Arnoux P01102154Z Test Probe, For Use With CA 755 Digital Testers, CA 757 Digital Testers　P01102154Z

Chauvin Arnoux Test Probe
The removable test probe can be replaced to meet the application and measurement conditions.

Tektronix

Tektronix Oscilloscope Module ADA400A, For Use With TDS400 Series, TDS500 Series, TDS5000 Series, TDS600 Series, TDS700　ADA400A

Tektronix ADA400A 1 MHz Differential Preamplifier. The ADA400A Active Differential Preamplifier allows direct oscilloscope measurements of very low amplitude voltages and signals which are not ground referenced. The high impedance of both inputs eliminates the need to add additional ground points in the DUT, thereby avoiding circulating currents which disturb the measurement or the circuit.,The high gain and extremely high common mode rejection provide usable measurements of voltages as low as 5μV, even in high noise environments. Selectable bandwidth limiting reduces normal mode noise from digital logic, switch mode power supplies and line frequency sources. Adjustable differential offset allows the user to null out transducer bridge bias and galvanic potential from the test set-up. An "infinite impedance" mode can be selected in the two highest gain ranges allowing accurate measurements of signals with high source impedance. It is specifically designed to operate on Tektronix oscilloscopes with TEKPROBE® interface. 10μV/div Sensitivity Low-pass filter: 100Hz, 3kHz, 100Hz or Full (1 MHz) Typically 100 dB CMRR DC to 10 kHz Selectable Gain: 100, 10, 1 or 0.1 Accurately measures signal as small as 5uV Integral Probe Power with TEKPROBE™BNC

Testec

Testec 20030-2 Test Probe Tip, For Use With Probe　20030-2

Special accessories for sensing heads

Tektronix

Tektronix P6245 Oscilloscope Probe, Probe Type: Active 1.5GHz 1:10　P6245

P6245 Active FET Probe. Solves three longstanding problems by providing: lower DUT loading (≤1 pF/1 MΩ probe loading); direct and easy access to SMDs; accesses DUT signals and scope bandwidth for TDS600/700/3000/5000/6000/7000*1 and CSA7000 scopes up to 1 GHz bandwidths. Provides the electrical and mechanical performance required for today's digital systems designs. No additional power supplies or cables are required when used with TEKPROBE BNC oscilloscopes. Achieves high-speed signal acquisition and low circuit loading. The small compact probe head and versatile attachment accessories allow direct connection to the device under test. Provides scope bandwidth at the probe tip for the TDS500/600/700 ≥1.5 GHz bandwidth (typical, probe only) ≤1 pF input capacitance 1 MΩ input resistance Direct access to SMDs as small as 0.5 mm pitch Measures CMOS, BiCMOS, ECL, GaAs and TTL Logic

Tektronix

Tektronix TDP1000 Oscilloscope Probe, Probe Type: Differential, High Voltage 1GHz 30V 1:5, 1:50　TDP1000

Tektronix TDP0500, TDP1000. For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development. ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 MHz 50X attenuation) Selectable bandwidth limiting filters DC reject Connects to some Tektronix oscilloscopes using the TekVPI™ probe interface Easy access to scope-displayed probe menu for probe setup control and operating status information Auto-Zero – nulls output offset

Tektronix

Tektronix Mixed Signal Oscilloscope Signal Adapter, Model TCABNC for use with TDS6000 Series, TDSCSA7000B Series　TCA-BNC

Tektronix TekConnect TCA Series Adaptors. These adaptors, available separately, provide less signal distortion and better performance than traditional connections used to move a signal from one environment to another, such as BNC to N or BNC to SMA.,TCA75 Adaptor (75 to 50Ω),Allows Tektronix oscilloscopes with TekConnect interface to easily access and measure 75Ω terminated circuitry. The TCA75's attenuation factor is automatically corrected to provide the end user with correctly displayed signal magnitudes.,TCA-BNC Adaptor (50Ω only),A direct 50Ω input with TekProbe BNC 50 Ω capability, this adaptor may be used as a direct 50Ω BNC input or with Tektronix high-speed active and differential probes requiring the TekProbe BNC 50Ω interface.,TCA-SMA and TCA-N Adaptors (50Ω only),These high-speed adaptors allow a more direct connection to the signal under test requiring N or SMA connections, without losing performance by adding other external conversion adaptors.,Applications include: signal integrity, jitter and timing analysis; verification, characterization and debug; high-speed digital devices and circuits; power supplies/inverters; semiconductor devices; electronic ballasts; industrial/consumer electronics; mobile communications; motor drives; transportation systems; disk drive analysis; investigation of transient phenomena; spectral analysis; video design and development; HDTV and streaming digital video; 3 Gbps HD-SDI.

Tektronix

Tektronix TPP0100 Oscilloscope Probe, Probe Type: Passive 100MHz 300V 1:10　TPP0100

Retractable hook tip, ground spring, ground lead with alligator clip. Tektronix 100MHz Passive Probes TPP0100 & TPP0101. For use on BNC oscilloscopes with 1MΩ/13pF (TPP0100) and 1MΩ/20pF (TPP0101) inputs.

Tektronix

Tektronix TCP305A Oscilloscope Probe, Probe Type: Current 50MHz　TCP305A

Tektronix TCP Series. The Tektronix TCP300 Series of split-core current probes incorporates transformer and Hall effect technology. The TCP300 models TCP303 (< 796-2683') 796-2683/ ), TCP305A ( < 781-0810') 781-0810/ ) and TCP312A ( < 781-0801') 781-0801/ ) are used with amplifier TCPA300 ( < 764-4391') 764-4391/ ), available separately, to provide high performance capability from low level milliamp measurements to the measurement of very high current levels. The TCP0030A ( < 781-0807') 781-0807/ ) is powered directly by oscilloscopes with the TekVPI interface. Easy-to-use and accurate AC/DC current measurements Connects to some Tektronix oscilloscopes using the TekVPI™ probe interface Provides automatic units scaling and readout on the oscilloscope display Split-core construction allows easy circuit connection Typically less than 1% DC gain error Low Noise and DC Drift Easy to Degauss and Autozero Setup controls and probe status/diagnostic indicators on probe hardware and via oscilloscope UI display menu

LeCroy

LeCroy PACC-MS001 Probe Holder, For Use With D420, D620, D410, D610 Probe Series　PACC-MS001

Teledyne LeCroy PACC-MS001 Freehand Probe Holder. One of the advantages of using Teledyne LeCroy oscilloscopes and probes is the large number of accessories available from RS for use with these instruments. It may be important to have up to four probes connected to tightly-packed test points in the circuit under test. Teledyne LeCroy's unique FreeHand probe holder enables users to set up all the probes once and keep their hands free to make measurements on the oscilloscope. The patented AutoColor ID feature identifies which probe is for which channel - each probe lights up with an LED colour matched to the channel that it is being used on.

LeCroy

LeCroy PK007-031 Test Probe Adapter Kit, For Use With LeCroy Oscilloscope Probe　PK007-031

Teledyne LeCroy Accessories for PP007 & PP008 Series Passive Probes. One of the advantages of using Teledyne LeCroy passive probes is the large number of accessories available from RS for use with these probes. Examples include clips, hooks, adapters, springs and ground leads. These accessories are designed for use with Teledyne LeCroy passive probes: PP007-WS ( < 724-0924') 724-0924/ ) for Wavesurfer 400 Series oscilloscopes; PP007-WR ( < 724-0927') 724-0927/ ) for WaveRunner 6000A Series oscilloscopes; PP008-1 ( < 724-0933') 724-0933/ ) for WaveRunner Xi Series.

LeCroy

LeCroy PP005-BNC Test Probe Tip, For Use With LeCroy Oscilloscope Probe　PP005-BNC

Teledyne LeCroy Accessories for PP005/PP005A Series Passive Probes. One of the advantages of using Teledyne LeCroy passive probes is the large number of accessories available from RS for use with these probes. Examples include hooks, adapters, tips and ground leads. These accessories are designed for use with Teledyne LeCroy passive probes PP005 and PP005A.

LeCroy

LeCroy,Accessory Kit Adjustment Tool (1), BNC Adapter (1), Color Coding Rings Set (2), Ground Attachment (1), IC Test　PKIT3-5MM-101

Teledyne LeCroy WaveAce Probe Accessory Replacement Kit PKIT3-5MM-101. This standard accessory kit is used with all WaveAce Passive Probes (PP013, PP014, PP015, PP016). Kit contains: standard ground lead; sprung hook; colour coding rings (x2 sets); adjustment tool; ground attachment; replacement probe tip (x2); BNC adaptor; IC test tip (x2).

LeCroy

LeCroy CP150-6M Current Probe　CP150-6M

Teledyne LeCroy CP030-3M and CP150-6M Current Probes. Teledyne LeCroy CP Series current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies. Teledyne LeCroy current probes do not require the breaking of a circuit or the insertion of a shunt to make accurate and reliable current measurements. Based on a combination of Hall effect and transformer technology, Teledyne LeCroy current probes are ideal for making accurate AC, DC, and impulse current measurements. CP030-3M (RS 136-8332). Current Meter, Clamp/Probe (Add On) CAT I 300V Measures AC, DC Current to 30A, 10 MHz. CP150-6M (RS 136-8333). Current Meter, Clamp/Probe (Add On) 600V CAT III, 300V CATIII Measures AC, DC Current to 150A RMS, 10 MHz

LeCroy

LeCroy T3DSO1000 Series T3DSO1102 Oscilloscope, Digital Storage, 2 Channels, 100MHz　T3DSO1102

LeCroy

LeCroy T3DSO1000 Series T3DSO1104 Oscilloscope, Digital Storage, 4 Channels, 100MHz　T3DSO1104

LeCroy

LeCroy T3DSO1000 Series T3DSO1204 Oscilloscope, Digital Storage, 4 Channels, 200MHz　T3DSO1204

LeCroy

LeCroy T3DSO1000-MSO Oscilloscope Software MSO Logic Analyzer Software, For Use With T3DSO1000 Series Oscilloscopes MSO　T3DSO1000-MSO

LeCroy

LeCroy T3DSO1000-FG Oscilloscope Software Waveform Generator Software, For Use With T3DSO1000 Series Oscilloscopes　T3DSO1000-FG

LeCroy

LeCroy T3DSO2000-LS Oscilloscope Probe, For Use With T3DSO2000 Series Oscilloscopes　T3DSO2000-LS

Chauvin Arnoux

Chauvin Arnoux Current Probe & Clamp　P01120409

Chauvin Arnoux MN60 Mini Clamps. Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c. Safe, non intrusive current measurement 40Hz to 10kHz bandwidth Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable Max. conductor size 20mm dia. or 20 x 5mm bus bar Fitted with a 2m coaxial lead and 50Ω BNC plug to suit most analogue & digital oscilloscopes Conforms to IEC1010-2-032 (safety standard) 600V Cat III

Metrix

Metrix Hard Carrying Case, For Use With OX 7042, OX 7102, OX 7104　HX0038

OX 7042, OX 7102, OX 7104 Oscilloscope accessories. HX0030: PROBIX 1/10 probe 250 MHz 1000 V. HX0031: PROBIX BNC adapter. HX0032: PROBIX 50 Ohm adapter. HX0033: PROBIX banana adapter. HX0034: PROBIX probe 10 mA → 80A / 100 KHz. HX0035: PROBIX type K thermocouple adapter. HX0038: carry case. HX0039: Ethernet straight cable. HX0040: Ethernet twisted cable. HX0041: RS232 / CENTRONICS adapter. HX0042: RS232 / SubD 9 point cable. HX0055: USB / RS232 adapter. SX-METRO / P: data processing software.

Tektronix

Tektronix TDP1500 Oscilloscope Probe, Probe Type: Active, Differential 1.5GHz 25V 1:1, 1:10　TDP1500

Tektronix TDP1500, TDP3500. For design, validation, debugging and characterization of common high-speed serial bus designs including I 2 C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 2.0, FireWire (1394b); signal integrity, jitter and timing analysis; manufacturing engineering and test. Accurate measurements for serial and digital applications Excellent common mode rejection - reduces measurement errors in higher common environments Low capacitive and resistive loading - maintains signal fidelity and reduces DC biasing interactions Connects to some Tektronix oscilloscopes using the TekVPI™ probe interface < 661-3302') 661-3302/

GMC-I Prosys

GMC-I Prosys ACP 3005/24 Current Probe & Clamp　ACP 3005/24

Instruction manual. ACP3 Series Flexible 3000Aac Current Probes. Superior measurement range from 100mA to 3000 Aac 2000 Hours continuous battery life (two AA MN1500 LR6 alkaline batteries, not supplied) Low battery and range overload indication Range selection by robust rotary switch High external field rejection Excellent accuracy over full range Small diameter (10mm) Rogowski coil with compact link for access to confined areas. Coil head connection sealed to IP65 EN61010 Safety Rating CAT IV 600V, CAT III 1000V

GMC-I Prosys

GMC-I Prosys ACP 3000/24 Current Probe & Clamp　ACP 3000/24

Instruction manual. ACP3 Series Flexible 3000Aac Current Probes. Superior measurement range from 100mA to 3000 Aac 2000 Hours continuous battery life (two AA MN1500 LR6 alkaline batteries, not supplied) Low battery and range overload indication Range selection by robust rotary switch High external field rejection Excellent accuracy over full range Small diameter (10mm) Rogowski coil with compact link for access to confined areas. Coil head connection sealed to IP65 EN61010 Safety Rating CAT IV 600V, CAT III 1000V

Tektronix

Tektronix TPP0850 Oscilloscope Probe, Probe Type: High Voltage, Passive 800MHz 1kV 1:50　TPP0850

Tektronix MSO/DPO 4000/5000 Accessories

TE Connectivity

TE Connectivity 3-582118-4 Test Probe　3-582118-4

TE Connectivity Substrate Test Probe Receptacle
3 Mounting Legs Applied to Substrate With Gold Plating, Laying Part, Material Funnel Input

LeCroy

LeCroy PP008-1 Oscilloscope Probe, Probe Type: Passive 500MHz 400V 1:10　PP008-1

The PP007-WR is designed to be used with the WaveRunner 6000 series, while the PP007-WS is designed for the WaveSurfer 400 series oscilloscopes. The physical design of these two probes is identical. All of the connection accessories, standard and optional, will fit both models. The PP008-1 is for use with WaveRunner Xi series oscilloscopes. Teledyne LeCroy Passive Probes. LeCroy passive probes automatically scale the oscilloscope waveforms without user input. They are optimised for maximum waveform fidelity, including high frequency signal components, in a rugged design suitable for everyday use.

LeCroy

LeCroy PP019-1 Oscilloscope Probe, Probe Type: Passive 250MHz 1:10　PP019-1

Sprung hook, GND lead with alligator clip, BNC adapter, replacement tip, trimmer tool, IC tip insulator, tip Insulator, identifier rings, probe tip GND. Teledyne LeCroy WaveSurfer 3000 Passive Probe PP019-1. The Teledyne LeCroy PP019-1 is a passive high impedance voltage oscilloscope probe designed and calibrated for use with general purpose oscilloscopes having an input impedance of 1 MΩ shunted by 16 pF. It may be compensated for use with instruments having an input capacitance between 10 to 30 pF. The PP019-1 is compatible with oscilloscopes that automatically detect probe attenuation and adjust their readout accordingly.

LeCroy

LeCroy PP020-1 Oscilloscope Probe, Probe Type: Passive 500MHz 1:10　PP020-1

Sprung hook, GND lead with alligator clip, BNC adapter, replacement tip, trimmer tool, IC tip insulator, tip Insulator, identifier rings, probe tip GND. Teledyne LeCroy WaveSurfer 3000 Passive Probe PP020-1. The Teledyne LeCroy PP020-1 is a passive high impedance voltage oscilloscope probe designed and calibrated for use with general purpose oscilloscopes having an input impedance of 1 MΩ shunted by 16 pF. It may be compensated for use with instruments having an input capacitance between 8 to 20 pF. The PP020-1 is compatible with oscilloscopes that automatically detect probe attenuation and adjust their readout accordingly.

Tektronix

Tektronix P5202A Oscilloscope Probe, Probe Type: Differential, High Voltage 100MHz 640V 1:20, 1:200　P5202A

TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most commonly required setup controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope. Tektronix high voltage differential probes include: TMDPO200 ( < 752-7366') 752-7366/ ); THDPO200 ( < 752-7357') 752-7357/ ); THDP0100 ( < 752-7353') 752-7353/ ); P5200A ( < 734-5029') 734-5029/ ); P5202A ( < 734-5022') 734-5022/ ); P5205A ( < 734-5026') 734-5026/ ); P5210A ( < 734-5035') 734-5035/ ). Tektronix High Voltage Differential Probes TMDP, THDP and P52xxA Series. Tektronix high voltage probing solutions offer safety and accuracy in applications which include: floating measurements; switching power supply design; motor drive design; electronic ballast design; CRT display design; power converter design and service; power device evaluation. Overrange indicator Safety certified Switchable attenuation Switchable bandwidth limit Cable length 1.5m (THDP & TMDP), 1.8m (P52xxA)