[Metrix] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Metrix Plate Shunt, 30 A, 300mV Output HA030-1
HA series shunts. A range of shunts to cover the 30 → 50 A range. These shunts can be adapted for use with all digital multimeters. The HA 050 model is recommended for analogue multimeters. Available in calibrated version.
1 products found
JPY: 53,600
USD: 335.99
-
Metrix Hard Carrying Case, For Use With OX 7042, OX 7102, OX 7104 HX0038
OX 7042, OX 7102, OX 7104 Oscilloscope accessories. HX0030: PROBIX 1/10 probe 250 MHz 1000 V. HX0031: PROBIX BNC adapter. HX0032: PROBIX 50 Ohm adapter. HX0033: PROBIX banana adapter. HX0034: PROBIX probe 10 mA → 80A / 100 KHz. HX0035: PROBIX type K thermocouple adapter. HX0038: carry case. HX0039: Ethernet straight cable. HX0040: Ethernet twisted cable. HX0041: RS232 / CENTRONICS adapter. HX0042: RS232 / SubD 9 point cable. HX0055: USB / RS232 adapter. SX-METRO / P: data processing software.
1 products found
JPY: 55,300
USD: 346.64
-
Metrix HX0130 Oscilloscope Probe, Probe Type: Passive DC to 500MHz 300V 1:10 HX0130
Recorder function (built-in), stylus, strap, operating manual and programming manual on CD-ROM, external power supply (battery charger), NiMH battery, μSD card with minimum capacity GB and SD-Card adapter, 2 x 1/10 Probix HX0130 probes, BNC Probix adapter, banana-Probix adapter, set of banana leads, BNC tee connector, crossed Ethernet cable, straight Ethernet cable, USB communication cable, processing software, carrying case, booklet containing "Presentation/implementation/measurements/diagnosis of each bus". 3-year warranty applies to oscilloscopes not probes. Each scope is supplied with two Probix 1/10 electronic probes 500 MHz 300 V Cat III ( HX0130, < 878-2505') 878-2505/ ). Each scope comes with a full complement of accessories which can be replaced or supplemented by separate purchases: BNC adapter HX0031 ( < 485-0657') 485-0657/ ); 50Ω BNC load HX0032 ( < 485-0663') 485-0663/ ); banana adapter HX0033 ( < 485-0679') 485-0679/ ); Probix 80A 20mV/A current clamp HX0034 ( < 485-0685') 485-0685/ ); hard carrying case HX0038 ( < 485-0708') 485-0708/ ); crossed Ethernet cable HX0040 ( < 485-0720') 485-0720/ ); RS232 cable HX0042 ( < 485-0742') 485-0742/ ); USB to RS232 adapter HX0055 ( < 213-035') 213-035/ ). Metrix Handheld Oscilloscope, Recorder, Multimeter, Bus Analyser 200MHz SCOPIX. Metrix Scopix III-BUS stand-alone handheld oscilloscopes include the 2-channel OX7202-BUS ( < 878-2508') 878-2508/ ) and the 4-channel OX7204-BUS ( < 878-2501') 878-2501/ ). Sampling rate, triggering capabilities and storage capacity are all designed to exceed user expectations. With these SCOPIX BUS models, users can check the physical integrity of field buses to verify the signal transmission quality with 14 protocols: Knx; DALI; CanHighSpeed; CanLowSpeed; AS-I; FlexRay; Profibus DP; RS232; RS485; Profibus PA; Ethernet 10 Base T; Ethernet 100 Base T; Ethernet 10 Base 2; Lin. Multi-interface communication possibilities include RS232, USB, local or remote Ethernet, web server and FTB server/client. The scopes are ergonomically designed, with ultra-compact casing, and are simple-to-use, with 5.7 inch TFT colour touchscreens. Applications include: industrial maintenance; automation, industrial processes, electronic equipment; networking complex instruments; computer networks; automotive; building automation, lighting; medical equipment linking. Only 3 steps for quick bus diagnostics Intuitive Human-Machine Interface Multi-interface communication SCOPIX III high performance
1 products found
JPY: 121,000
USD: 758.48
-
Metrix Mixed Signal Oscilloscope BNC Adapter, Model HX0031 for use with OX 7042, OX 7102, OX 7104 HX0031
OX 7042, OX 7102, OX 7104 Oscilloscope accessories. HX0030: PROBIX 1/10 probe 250 MHz 1000 V. HX0031: PROBIX BNC adapter. HX0032: PROBIX 50 Ohm adapter. HX0033: PROBIX banana adapter. HX0034: PROBIX probe 10 mA → 80A / 100 KHz. HX0035: PROBIX type K thermocouple adapter. HX0038: carry case. HX0039: Ethernet straight cable. HX0040: Ethernet twisted cable. HX0041: RS232 / CENTRONICS adapter. HX0042: RS232 / SubD 9 point cable. HX0055: USB / RS232 adapter. SX-METRO / P: data processing software.
1 products found
JPY: 16,500
USD: 103.43
-
Metrix Mixed Signal Oscilloscope Ohm Adapter, Model HX0032 for use with OX 7042, OX 7102, OX 7104 HX0032
OX 7042, OX 7102, OX 7104 Oscilloscope accessories. HX0030: PROBIX 1/10 probe 250 MHz 1000 V. HX0031: PROBIX BNC adapter. HX0032: PROBIX 50 Ohm adapter. HX0033: PROBIX banana adapter. HX0034: PROBIX probe 10 mA → 80A / 100 KHz. HX0035: PROBIX type K thermocouple adapter. HX0038: carry case. HX0039: Ethernet straight cable. HX0040: Ethernet twisted cable. HX0041: RS232 / CENTRONICS adapter. HX0042: RS232 / SubD 9 point cable. HX0055: USB / RS232 adapter. SX-METRO / P: data processing software.
1 products found
JPY: 47,000
USD: 294.62
-
Metrix Mixed Signal Oscilloscope Banana Adapter, Model HX0033 for use with OX 7042, OX 7102, OX 7104 HX0033
OX 7042, OX 7102, OX 7104 Oscilloscope accessories. HX0030: PROBIX 1/10 probe 250 MHz 1000 V. HX0031: PROBIX BNC adapter. HX0032: PROBIX 50 Ohm adapter. HX0033: PROBIX banana adapter. HX0034: PROBIX probe 10 mA → 80A / 100 KHz. HX0035: PROBIX type K thermocouple adapter. HX0038: carry case. HX0039: Ethernet straight cable. HX0040: Ethernet twisted cable. HX0041: RS232 / CENTRONICS adapter. HX0042: RS232 / SubD 9 point cable. HX0055: USB / RS232 adapter. SX-METRO / P: data processing software.
1 products found
JPY: 16,500
USD: 103.43
-
［Out of stock］Metrix VX 0003 Microwave Detector, 10 → 3000Hz VX0003
The VX 0003 and VX 0100 perform the test in accordance with the current and even future standards: Recommendations by WHO / ICNIRP (World Health Organization / International Commission on Non-Ionizing Radiation Protection) IEEE C95.6-2002 (International standard - Public, 0 - 3 kHz range) European directive 1999/519/CE (Public, 0 - 100 kHz range and above) European directive 2004/40/CE (Workers, 0 - 100 kHz range and above) 2010 draft standard, EN IEC 62493 (Lighting Systems) EN50366 standard and IEC 62233 in 2012 (Household Appliances). VX0003 (< 740-6506') 740-6506 supplied with with a 5 m earth cable (HX0103), socket tester, belt bag (HX0104). VX0100 (< 740-6509') 740-6509 supplied with an external fi eld and cable detection antenna (HX0100), 5 m earth cable (HX0103), socket tester, hard case 270 x 195 x 65 (HX0109). Bio Test® Low Frequency Electric Field Testers. The VX 0003 and VX 0100 electric field testers/meters instantly indicate the level of electromagnetic pollution. Ideal for the housing and tertiary sectors, they are designed for both professional and private use. The Bio Test® VX testers are simple, economical, reliable and calibrated metrologically. The VX 0003 (< 740-6506') 740-6506 is equipped with an internal antenna and can measure from 10 Hz to 3 kHz. The VX 0100 (< 740-6509') 740-6509 has an interchangeable antenna for measurements from 10 Hz to 100 kHz. The highly practical VX 0100 can also be used to detect cables during renovation work, for example. Hand-held and designed for stand-alone use (60 to 80 hours) Instruments designed by a well-known manufacturer in the electrical installation sector Top-quality manufacture, professional instruments with 2-year warranty Audio signal for immediate identification of field levels Detailed manual for measurement, diagnostics and corrective solutions Delivered with socket tester (phase position and presence of earth)
1 products found
JPY: 51,100
USD: 320.32
-
［Out of stock］Metrix VX 0100 Microwave Detector, 3 → 100kHz VX0100
The VX 0003 and VX 0100 perform the test in accordance with the current and even future standards: Recommendations by WHO / ICNIRP (World Health Organization / International Commission on Non-Ionizing Radiation Protection) IEEE C95.6-2002 (International standard - Public, 0 - 3 kHz range) European directive 1999/519/CE (Public, 0 - 100 kHz range and above) European directive 2004/40/CE (Workers, 0 - 100 kHz range and above) 2010 draft standard, EN IEC 62493 (Lighting Systems) EN50366 standard and IEC 62233 in 2012 (Household Appliances). VX0003 (< 740-6506') 740-6506 supplied with with a 5 m earth cable (HX0103), socket tester, belt bag (HX0104). VX0100 (< 740-6509') 740-6509 supplied with an external fi eld and cable detection antenna (HX0100), 5 m earth cable (HX0103), socket tester, hard case 270 x 195 x 65 (HX0109). Bio Test® Low Frequency Electric Field Testers. The VX 0003 and VX 0100 electric field testers/meters instantly indicate the level of electromagnetic pollution. Ideal for the housing and tertiary sectors, they are designed for both professional and private use. The Bio Test® VX testers are simple, economical, reliable and calibrated metrologically. The VX 0003 (< 740-6506') 740-6506 is equipped with an internal antenna and can measure from 10 Hz to 3 kHz. The VX 0100 (< 740-6509') 740-6509 has an interchangeable antenna for measurements from 10 Hz to 100 kHz. The highly practical VX 0100 can also be used to detect cables during renovation work, for example. Hand-held and designed for stand-alone use (60 to 80 hours) Instruments designed by a well-known manufacturer in the electrical installation sector Top-quality manufacture, professional instruments with 2-year warranty Audio signal for immediate identification of field levels Detailed manual for measurement, diagnostics and corrective solutions Delivered with socket tester (phase position and presence of earth)
1 products found
JPY: 92,500
USD: 579.83
-
［Out of stock］Metrix MX 406B, Insulation Tester 200MΩ MX0406B
IEC 1010-1 300 V cat. ll, EN 61557, NF C 15-100. MX 406 insulation tester. The MX 406 is an insulation and continuity tester for electrical installations and equipment. Designed to withstand the stresses of field use, the MX 406 is an indispensable tool for installers, testing organisations and maintenance services. The remote control probe supplied as standard provides unequalled user comfort: simply press the probe button to start measuring. The logarithmic scale of insulation values eliminates the need to change ranges while reading. Device supplied with 1 remote control probe, 1 black safety lead, 1 black crocodile clip and a user manual.
1 products found
JPY: 184,000
USD: 1,153.39
-
［Out of stock］Metrix MX0355-Z Clamp Meter, Max Current 400A ac, 400A dc CAT II 600 V, CAT III 300 V MX0355-Z
IEC 61010-1 and IEC 61010-2-032 Cat. III, 300 V - Cat. II, 600 V. Pocket clamp multimeters MX 350 and MX 355. Clamp-on ammeters for data acquisition. Ergonomic, with 4000 count display, to measure voltage and AC and DC currents. The hold function holds the measured value in difficult access or low-light conditions for analysis at a later time. Combines different functions: multimeter, voltage and AC current measurement, ohmmeter and continuity testing. The MX355's Δ Zero function allows the Zero dc to be automatically set, and can also be used for differential measurements. Supplied with two batteries, a set of test leads and a carry case. Available in calibrated version.
1 products found
JPY: 79,100
USD: 495.83
-
［Out of stock］Metrix MX0350-Z Clamp Meter, Max Current 400A ac CAT II 600 V, CAT III 300 V MX0350-Z
IEC 61010-1 and IEC 61010-2-032 Cat. III, 300 V - Cat. II, 600 V. Pocket clamp multimeters MX 350 and MX 355. Clamp-on ammeters for data acquisition. Ergonomic, with 4000 count display, to measure voltage and AC and DC currents. The hold function holds the measured value in difficult access or low-light conditions for analysis at a later time. Combines different functions: multimeter, voltage and AC current measurement, ohmmeter and continuity testing. The MX355's Δ Zero function allows the Zero dc to be automatically set, and can also be used for differential measurements. Supplied with two batteries, a set of test leads and a carry case. Available in calibrated version.
1 products found
JPY: 54,600
USD: 342.26
-
［Out of stock］Metrix MX0650-Z Clamp Meter, Max Current 1kA ac CAT III 600 V MX0650-Z
IEC-1010 Class II, 600 V, Cat. III. MX 650 Current Probes. Range of Hall-effect clamp-on multimeters. 4000 count display. Automatic shut-off when idle for 30 minutes. HOLD function available on the MX 640 model.
1 products found
JPY: 79,300
USD: 497.09
-
［Discontinued］Metrix HX0040 Oscilloscope Ethernet Cable, Model HX0040, For Use With OX 7042, OX 7102, OX 7104 HX0040
OX 7042, OX 7102, OX 7104 Oscilloscope accessories. HX0030: PROBIX 1/10 probe 250 MHz 1000 V. HX0031: PROBIX BNC adapter. HX0032: PROBIX 50 Ohm adapter. HX0033: PROBIX banana adapter. HX0034: PROBIX probe 10 mA → 80A / 100 KHz. HX0035: PROBIX type K thermocouple adapter. HX0038: carry case. HX0039: Ethernet straight cable. HX0040: Ethernet twisted cable. HX0041: RS232 / CENTRONICS adapter. HX0042: RS232 / SubD 9 point cable. HX0055: USB / RS232 adapter. SX-METRO / P: data processing software.
1 products found
JPY: 11,460
USD: 71.84
-
［Out of stock］Metrix 3290 Handheld Digital Multimeter, 20A ac 600V ac 20A dc 600V dc MTX3290
IEC 61010-1, Cat III 600 V, Cat IV 300 V, EN61326-1. MTX3290 (ASYC IV) Digital Multimeter. MTX3290 digital display multimeters are training multimeters and are used in total safety within both electronics and electrical engineering. The MTX3290 provides direct measurement of the main electrical quantities they are compact, rugged leak proof and comfortable to hold. An easy to use multimeter providing you with surveillance of the main functions. A large LCD display, digital keyboard and lighting all in an IP67 casing. Features and Benefits:. Extra-large digital monochrome screen (70 x 52 mm) with bargraph and display of measurements simultaneously, with 6000 counts Intuitive digital keypad with lighting for active settings DC, AC and AC+DC voltage DC, AC and AC+DC current Frequency Resistance and continuity Diode test Capacitance Clamp function with V output and direct readings Temperature with Pt100 / 1000 Protection: IP67. Added Benefits:. Contextual reminder of connection to the screen. Current auto-ranging, single terminal up to 10 A. Secondary measurements in addition to the main measurements to enable analysis. Surveillance of the MIN/MAX and AVG data with relative time/date stamping and of voltage and current peaks. IP67 Protection against water projection and dust, excellent for outdoor environments. Power Supply:. 4 x standard AA batteries. OR. 4 Ni-MH batteries. Rechargeable with an HX0051B external module. 400 Hours operation time on batteries. What Is Included?. Multimeter. 4 x 1.5 V alkaline batteries. Cable 1.5 m long, straight/straight red. Cable 1.5 m long, straight/straight black. Red CAT IV 1 kV test probe. Black CAT IV 1 kV test probe. User guide on CD and paper start-up guide
1 products found
JPY: 98,700
USD: 618.69
-
［Out of stock］Metrix 3291 Handheld Digital Multimeter, 20A ac 1000V ac 20A dc 1000V dc MTX3291
IEC 61010-1, Cat III 1000 V, Cat IV 600 V, EN61326-1. MTX3291 (ASYC IV) Digital Multimeter. MTX3291 digital display multimeters are training multimeters and are used in total safety within both electronics and electrical engineering. The MTX3291 provides direct measurement of the main electrical quantities they are compact, rugged leak proof and comfortable to hold. An easy to use multimeter providing you with surveillance of the main functions. A large LCD display, digital keyboard and lighting all in an IP67 casing. Features and Benefits:. Extra-large digital monochrome screen (70 x 52 mm) with bargraph and display of measurements simultaneously, with 60000 counts Intuitive digital keypad with lighting for active settings DC, AC and AC+DC voltage DC, AC and AC+DC current Frequency Resistance and continuity Diode test Capacitance Clamp function with V output and direct readings Temperature with Pt100 / 1000 Communication: IR / USB Protection: IP67. Added Benefits:. Contextual reminder of connection to the screen. Current auto-ranging, single terminal up to 10 A. Secondary measurements in addition to the main measurements to enable analysis. Surveillance of the MIN/MAX and AVG data with relative time/date stamping and of voltage and current peaks. SX-DMM software for real-time processing of the data on a PC. IP67 Protection against water projection and dust, excellent for outdoor environments. Power Supply:. 4 x standard AA batteries. OR. 4 Ni-MH batteries. Rechargeable with an HX0051B external module. 400 Hours operation time on batteries. What Is Included?. Multimeter. Cable 1.5 m long, straight/straight red. Cable 1.5 m long, straight/straight black. Red CAT IV 1 kV test probe. Black CAT IV 1 kV test probe. User guide on CD and paper start-up guide. USB Cable. Remote programming instructions. SX-DMM software. Bag
1 products found
JPY: 142,000
USD: 890.12
-
［Discontinued］Metrix MTX202 Handheld Digital Multimeter, 10A ac 600V ac 10A dc 600V dc MTX202-Z
IEC 61010-2-033 600 V CAT III. 2. Metrix MTX202 True RMS Digital Multimeter, 4000 Counts. The Metrix MTX202 multimeter offers high performance combined with simplicity in use. Its compact, ergonomic casing is designed for one-hand use and easy stowing for applications in the field. The magnetised sheath enables hands-free use, even in electrical cabinets. The two-position stand ensures easy reading, however the multimeter is positioned. Clarity of readings is enhanced by the blue backlighting of the display. A built-in torch means the multimeter can be used in the dark. The rotary switch offers one function per position. On the front panel, three keys are all that are needed to access the various functions. The 600 V CAT III, IP54 double-well input terminals are easily accessible. Electrical maintenance operations are optimised by the VLowZ low-impedance voltage measurement function. In addition to traditional measurements, the MTX202 can measure temperature via a K thermocouple contact sensor delivered as standard. MTX202 applications range from electrical maintenance to initial troubleshooting on PCBs (measuring resistance, capacitance, diode) and verification of radiator control. Features and Benefits:. True RMS AC current and voltage measurements Display 4000 counts AC/DC voltage 0.4 V to 600 V AC/DC current 0.02 A to 10 A Resistance 1 Ω to 40 MΩ Capacitance 1 nF to 100 mF Temperature with K thermocouple (°C / °F) from -55 °C to +1 200 °C All ranges programmed automatically for simpler use NCV (no-contact voltage) detection for safe working Backlit screen and built-in torch Ergonomic design Shockproof sheath with storage slots for leads Sheath magnetised for easy mounting on electrical cabinets Instrument dimensions 170 x 80 x 50 mm Weight 320 g. Added Benfits:. Ideal for diverse uses in multiple environments. Meets the needs of all self-employed electricians. Ideal for day to day use. Compact casing. Fits comfortably in one hand. Easy to pack into a toolbox. Handy for use in the field. Leads can be fixed in place at the back of the multimeter. Stand for hands free use. Fuse and batteries easy and quick to replace. What Is Included?. 1 Shockproof sheath. 1.5 m Lead with 4 mm elbowed plug / Red CAT III 600 V test probe. 1.5 m Lead with 4 mm elbowed plug / Black CAT III 600 V test probe. Flexible K thermocouple with 40mm adapter. 2 x 1.5 V AA batteries. 1 Operating paper manual
1 products found
JPY: 33,500
USD: 209.99
-
［Discontinued］Metrix MTX203 Handheld Digital Multimeter, 10A ac 750V ac 10A dc 1000V dc MTX203-Z
IEC 61010-2-033 600 V CAT III. Shockproof sheath, 1.5 m straight lead / red CAT III 600 V test probe, 1.5 m straight lead / black CAT III 600 V test probe, flexible K thermocouple with 4 mm diameter adapter, operating manual, 1.5 V AA batteries (x2). 2. Metrix MTX203 True RMS Digital Multimeter, 6000 Counts. The Metrix MTX203 multimeter offers high performance combined with simplicity in use. Its compact, ergonomic casing is designed for one-hand use and easy stowing for applications in the field. The magnetised sheath enables hands-free use, even in electrical cabinets. The two-position stand ensures easy reading, however the multimeter is positioned. Clarity of readings is enhanced by the blue backlighting of the display. A built-in torch means the multimeter can be used in the dark. The rotary switch offers one function per position. On the front panel, three keys are all that are needed to access the various functions. The 600 V CAT III, IP54 double-well input terminals are easily accessible. Electrical maintenance operations are optimised by the VLowZ low-impedance voltage measurement function. In addition to traditional measurements, the MTX203 can measure temperature via a K thermocouple contact sensor delivered as standard. MTX203 applications range from electrical maintenance to initial troubleshooting on PCBs (measuring resistance, capacitance, diode) and verification of radiator control. Features and Benefits:. True RMS AC current and voltage measurements Display 6000 counts AC/DC voltage 0.6 V to 750 V AC/DC current 0.6 A to 1000 A Resistance 1 Ω to 60 MΩ Capacitance 1 nF to 100 mF Temperature with K thermocouple (°C / °F) from -55 °C to +1 200 °C All ranges programmed automatically for simpler use NCV (no-contact voltage) detection for safe working Backlit screen and built-in torch Ergonomic design Shockproof sheath with storage slots for leads Sheath magnetised for easy mounting on electrical cabinets Instrument dimensions 170 x 80 x 50 mm Weight 320 g. Added Benefits:. Ideal for diverse uses in multiple environments. Meets the needs of all self-employed electricians. Ideal for day to day use. Compact casing. Fits comfortably in one hand. Easy to pack into a toolbox. Handy for use in the field. Leads can be fixed in place at the back of the multimeter. Stand for hands free use. Fuse and batteries easy and quick to replace. What Is Included?. 1 Shockproof sheath. 1.5 m Lead with 4 mm elbowed plug / Red CAT III 600 V test probe. 1.5 m Lead with 4 mm elbowed plug / Black CAT III 600 V test probe. Flexible K thermocouple with 40mm adapter. 2 x 1.5 V AA batteries. 1 Operating paper manual
1 products found
JPY: 41,500
USD: 260.14
