Schneider Electric

Voltage Tester Lv429325 Max: 550 V　LV429325

Schneider Electric voltage indicator for the Compact NSX 100/160/250.
This accessory detects and indicates that power is being applied to the Circuit Breaker terminal.

Schneider Electric

Insulation Resistance Meter　IMDIFL12

Schneider Electric

Adapter for Vigilohm Insulation Monitoring Device and others

Schneider Electric

Instrument Accessories Acti9 for PowerLogic　METSECTR90500

RS PRO

RS PRO Volt-Stick PRO Non Contact Voltage Detector, 230V ac to 1000V ac　166-838

Two AAA batteries, instruction manual.
It does not detect cables behind buried plasters, buried trunking, and so on. It also does not detect output from the safety isolation transformer when using a grounded auxiliary center tap.　This equipment must be verified for proper operation using known voltages before use.

RS PRO

RS PRO Volt-Stick SOUND Non Contact Voltage Detector, 230V ac to 1000V ac　167-645

Will NOT detect cables behind buried plaster, buried trunking etc
and will not detect output from safety isolation transformers with earthed secondary centre tap

RS PRO

RS PRO Non Contact Voltage Indicator 400V ac　214-467

It does not detect cables behind plasters, buried trunks, etc. It also does not detect output from the safety isolation transformer when using a grounded auxiliary center tap. This equipment must be verified for proper operation using known voltages before use.
Voltage Stick AC Indicator

RS PRO

RS PRO RS9020 Phase Rotation Tester, CAT III 300 V, 400Hz Max, 400V ac Max　123-1932

3 Automatic Fixing Test Leads, 3 Strap Clips, Carrying Case, User Manual • RS Pro RS9020 Motor/Phase Rotation Indicator • RS9020 Motor/Phase Rotation Indicator is an affordable handheld battery-powered device. It is designed to detect the rotational field of a three-phase system and identify the direction of motor rotation.
Features and benefits: Nominal voltage Rotational direction: 1 → 400 V ac Nominal voltage Phase indication: 120 → 400 V ac Frequency range: 2 Hz → 400 Hz Test current (per phase): <3.5 mA Protection level: CAT III 600 V Protection grade: IP40 Specific rotation field direction Non-contact rotating field indication Specific magnetic field detection Operating temperature: 0 → +40 C Operating altitude: 2000 m Contamination level: 2 Humidity: 15 → 80% Dimensions: 130 mm x 69 mm x 32 mm Weight: 130 g

RS PRO

RS PRO RS9010 Phase Rotation Tester, CAT III 600 V, CAT IV 300 V, 400Hz Max, 690V ac Max　123-1933

IEC61010/EN61010, IEC61557-7/EN61557-7
3 x Automatic Fixing Test Leads, 3 x Strap Clips, Carrying Case, User Manual

RS PRO

RS PRO IVP-1 Non Contact Voltage Detector, 100V ac to 1000V ac　123-3247

It does not detect cables behind buried plasters, buried trunking, and so on. It also does not detect output from the safety isolation transformer when using grounded auxiliary center taps.　This equipment must be verified for proper operation using known voltages before use.
2 AAA Batteries/Owner's Manual Wipe the VOLT PEN periodically with a dry cloth. Do not use abrasives or solvents.

RS PRO

RS PRO IVT-10, LED Voltage tester, 750V ac/dc, Continuity Check, Battery Powered, CAT III 750V　124-1961

CAT IV 600 V/CAT III 750 V
Battery and Owner's Manual

RS PRO

RS PRO IVT-20, LCD Voltage tester, 750V ac/dc, Continuity Check, Battery Powered, CAT III 750V　124-1962

CAT IV 600 V/CAT III 750 V Safety Protection Standard
Battery and Owner's Manual

RS PRO

RS PRO Voltage Indicator CAT III 1000 V, CAT IV 600 V　161-1627

RS PRO

RS PRO Clamp Meter, Max Current 3kA ac CAT III 1000 V, CAT IV 600 V　161-1631

Wiha Tools

Wiha Tools 32201 Mains Tester Screwdriver, 220 → 250 V　32201

Voltage Tester. Slotted blade Transparent with clip

Martindale

Martindale TEK 100 Non Contact Voltage Detector, 100V ac to 600V ac　TEK100

1 x PP3 battery. Non-Contact Voltage Indicator Martindale TEK100. A non-contact, 100 V ac to 600 V ac voltage indicator with both audible and visual voltage warning. A self-test feature (which ensures the unit is working) transmits a 50 Hz signal to the sensing device testing the integrity of the internal circuitry. Proving the unit is fully functional and avoids the need for a separate proving unit. Pocket-sized unit Voltage detection without making contact 100 V ac → 600 V ac range LED light indicators Audible indicator Self-test function means there is no need to use proving units Replacement PP3 batteries can be purchased separately (Stock No. < 394-9059)') 394-9059)/ CAT IV 600 V

CK

CK 440008 Mains Tester Screwdriver, Neon Indicator, 125 → 250 V ac　440008

DIN 57680-6, DIN VDE 0680-6:1972-04. Main tester. Professional electricians voltage tester One piece moulded handle with insulation High visibility permanently sealed neon tube

SKF

SKF Non Contact Voltage Detector　TKED 1

SKF TKED1 Non-Contact Electrical Discharge Detector. (EDD Pen). Electrical erosion, lubricant degradation and bearing failure are often caused by electrical discharges as a result of motor shaft voltages discharging through a bearing. The TKED1 has been uniquely and specifically designed to detect these discharges safely, protecting the user whilst a motor or machinery is in motion. No special training is needed to use the detector and no touching of machinery is required. The EDD pen comes with an LED back lit screen which assists users in dark environments, it also features an antenna and ergonomic grip. Capable of detecting discharges on a time base of 10 seconds, 30 seconds or indefinite, this device can significantly prevent unplanned machinery downtime. Features and Benefits:. 50 MHz to 200 MHz frequency range Remote solution, works at a distance LED Backlit screen IP55 for use in most industrial environments. How do non-contact voltage testers work?. Also known as a voltage detector, voltage tester pens, sensors or test pens. They allow the user to test electrical conductors without touching them. Non-contact testers are the safest and easiest way to detect electric fields or voltage. Voltage testers utilise what is called capacitive coupling, the user holding the instrument provides a ground reference. The tester then detects changing electric field around the object or objects conducting an AC current. (Alternating current) Simply put, the user and the tester pen when near the electrical conductor will cause a small current to flow through the tester from the source, this is how it detects AC voltage.

Martindale

Martindale RSPC15250 Phase Rotation Tester CAT IV 600V CAT IV 600 V 60Hz 600V ac, Model PC 15250　PC15250

One fused crocodile clip, two fused prods with retractable GS38 shrouds, instructions. PC15250 Phase Sequence Indicator. The PC15250 Phase Rotation Tester is a simple and quick 3 phase continuity and rotation indicator. The phase sequence indicator gives a fast and effective identification of worn or unmarked cables and ensures 3-phase outlets and machines are wired correctly Retractable GS38 probe shields give a choice between using long, exposed tips for reaching inaccessible contacts, and safer, shorter lengths for increased safety Input voltage range: 50V to 600V AC (Phase to Phase) Input frequency: 40 to 60Hz Input current: < 3mA Conforms to GS38 and BS EN61557-7, CAT IV 600V Class II, Double Insulation

Martindale

Martindale VI13800 Voltage Indicator CAT III 1000V, CAT IV 600 V　VI13800

BS EN61243-3: 2010. Safety Voltage Indicator Without Fuse, VI13800. The Martindale VI13800 is identical to the Martindale VI3700 except that the VI3800 does not have a fuse. This is so that it complies with BS EN61243-3: 2010, which came into effect in May 2013. This standard bans the use of fuses in 2-pole voltage indicators. The VI13800 safety characteristics include retractable prods, cable with an inner cover of different colour (to quickly identify damaged cables) and impedance at both ends to limit current flow if a lead should be broken. Testing for DC and AC voltage up to 600V Automatic AC/DC detection Bright LED indication Full voltage indication function without batteries Protective resistor in probe to limit current in event of cable damage Ergonomic and robust housing Retractable shrouds Fully meets GS38 and BE EN61243-3: 2010 Measurement Category CAT IV 600V, CAT III 1000V

Martindale

Martindale CMD1000 Cable Tracer, Cable Detection Depth 0.4 (U AC) m, 0.5 (Dual Pole) m, 2 (Single Pole) m, 2.5 (Single　RSCD1000

Transmitter, Receiver, bag, TL47 test leads (with crocodile clips), earthing rod, 9V alkaline battery, 1.5V alkaline battery x 6 and instructions. CD1000 Cable Detector Kit. The Martindale CD1000 Cable Detector is ideal for tracing cables in walls and underground, locating fuses/breakers on live or dead circuits and locating interruptions and open-circuits in cables and electrical floor heating systems. It can also be used for tracing metallic water and heating pipes. For all applications (live or dead cables) without additional instruments Proven digitally coded sender signal guarantees clear signal identification Transmitter with LCD display for transmitting level, transmitting code Receiver with a backlight LCD display for level of receiving signal, code of receiving signal and live voltage indication Automatic or manual adjustment of receiving signal sensitivity Mute function Auto power off Additional torch lamp for working in dark environments Additional transmitters can be used for multiple users. Conforms to BS EN61010-1 CAT III 300V Class II Double Insulation Pollution degree: 2. Transmitter:. Conforms to BS EN 61010-1 CAT III 600V Class II Double Insulation Pollution degree: 2. Receiver:

Catu

Catu MS152 Phase Rotation Tester CAT III 400V 60Hz 400V, Model MS-152　MS152

Phase order indicator. Rotating fields indicated via LED. Rotation direction indicated by "OK" and "Reverse" arrows. Fault detection LEDs for connection errors, cut or absent phase or neutral amongst the phases.

John Drummond

John Drummond DRUMTL20 Voltage Indicator CAT III 1000 V, CAT IV 600 V　MTL20

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit. Right angled probe tip, two straight tips and instructions. Drummond Test Lamp MTL20. Bright LED indication of voltage between 50V and 500V AC/DC Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems Additional two button test allows the unit to draw a high current to differentiate between potentially hazardous phantom voltages and hazardous persistent voltages Finger shields and insulated probe tips with only 4mm of exposed metal Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant Meets the UK Health and Safety Executive guidance notes on electrician s test lamp (GS38) Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V No batteries required

Martindale

Martindale PSI4000 Phase Rotation Tester CAT III 1000V, CAT IV 600V CAT III 1000 V, CAT IV 600 V 65Hz 1000V ac　PSI4000

4 x AA batteries, soft carry case and instruction manual. PSI4000 Phase Rotation Indicator. The Martindale PSI4000 is a unique phase rotation indicator that carries out the measurement via inductive crocodile clips. This method increases the safety of the user, whilst the bright LEDs give a clear indication of either clockwise or anti-clockwise phase rotation. The design of this phase rotation tester allows for use on both insulated or uninsulated conductors, and an "Enhanced Brightness" switch makes indication brighter in strong ambient light. A combination of both rotating LEDs and buzzer tones indicate clockwise or anti-clockwise rotation. Input Voltage: 150V-1000V 3-Phase AC. Frequency Range: 45-65Hz Operating Temperature & Humidity: -10 °C to 50 °C, Max. 80%RH. Battery Current consumption: 15mA Cable Length: Approx. 800 mm Power Source: 1.5V X 4 (AA or LR6) alkaline batteries Auto-Off: After 5 mins of non activity Low Battery Warning: Power LED flashes below 4.6V DC battery voltage

Gossen Metrawatt

Gossen Metrawatt METRAVOLT 12D+L Voltage Indicator Continuity Check CAT IV 1000 V　M630G

Operating instructions, battery. Metravolt 12D+L Voltage and Continuity Tester. The Metravolt 12D+L is a 2-pole voltage tester with digital display combined with integrated continuity, phase, polarity and phase sequence testing. The voltage tester allows for safe detection and measurement of AC and DC voltages within a range of 24 to 1000 V at frequencies of up to 4 kHz Resistance can also be measured within a range of 0 to 1999 kΩ with the integrated continuity tester Voltage and resistance values appear in digital format at the LCD Three LEDs indicate dangerous contact voltage and phase sequence, another LED indicates resistance and a sound generator indicates continuity Fully Automated Measuring Sequence Measured Value Storage Self-Test and Battery Monitoring Rugged Housing Complies with CAT IV

Gossen Metrawatt

Gossen Metrawatt DUSPOL expert 1000 Voltage Indicator Continuity Check CAT III 1000 V, CAT IV 600 V　M611E

EN 61326 Part 1, CAT IV 600 V / CAT III 1000 V. DUSPOL expert 1000 Voltage Tester. The DUSPOL expert 1000 voltage tester is rated for DC and AC voltage tests in a voltage range from 12 V to 1000 V. With DC voltage, it is possible to perform polarity tests and with AC voltage, it is also possible to perform phase tests with these instruments The DUSPOL expert 1000 voltage tester shows the phase sequence of a 3-phase current system, provided the neutral point is grounded Voltage testing Phase sequence test Phase testing Polarity check Cable fracture detector Continuity test Load connection via vibration motor Vibrating alert: the integrated motor with unbalance signals activity during load testing by generating vibrations in the tester handle Illumination of measuring points Rugged housing design with rubberized handle surface Protection class: IP 65 Power supply: 2 x 1.5 V LR03 / AAA

Martindale

Martindale ET4 Clamp Meter, Max Current 200A ac, 200A dc CAT III 600V　RSET4

ET4 electrical tester, TL17 test leads, soft carry case, 9V battery, instruction manual. ET4 Electrical Tester. The Martindale ET4 is a compact electrical tester for measuring voltage, resistance and current. The electrical tester also has frequency, continuity and diode test functions and can also be used as a non-contact voltage indicator. It has the additional functions including auto power off, display hold. AC / DC Current: 0.1A to 200A AC / DC Voltage: 0.1mV to 600V Resistance: 0.1Ω to 50MΩ Frequency: 30Hz to 400Hz Continuity: 0.1Ω to 500Ω, buzz at <30Ω Diode Test: 1mV to 2V Non-Contact Voltage Indicator: 70V to 600V Fork maximum conductor size: 15mm diameter Power: 9V PP3 Alkaline (included) Dimensions: 202 x 51 x 44 mm Weight: 200 g (battery included). SAFETY. Conforms to BS EN 61010-1, BS EN 61010-2-032, CAT III 600 V Class II, Double Insulation Pollution Degree 2, indoor use. EMC. Conforms to BS EN 61326-1

Martindale

Martindale VT7 Voltage Indicator CAT III 600 V, CAT IV 300 V　RSVT7

VT7 Single Pole Voltage Indicator. The VT7 is a single pole contact voltage indicator which detects AC voltages of 50V-600V with bright LED indication. The VT7 single pole voltage indicator has a self test function and is IP54 rated, for indoor and outdoor use.. Voltage range: 50V - 600Vac rms Audible and visual indication Bright LED indication Frequency range: 50 - 60Hz Test current: <5μA IP rating: IP54 Conforms to BS EN61010-1 CAT IV 300V, CAT III 600V Class II, Double Insulation Pollution Degree: 2 Dimensions: 236 x 44 x 33 mm

Megger

Megger Terminal Adaptor Kit for TDR2000/3 Handheld TDR　1003-218

Terminal Adaptor Kit. Terminal adaptor kit for TDR2000/3 Cable Fault Locator.

GEDORE

Gedore Non Contact Voltage & Magnetic Field Indicator　2824434

VDE Insulated Phillips Magnetic Voltage Finder and Tester
This is a 1000 V insulated magnetic field tester approved for commercial use and a non-contact voltage finder for work under energized conditions.

Chauvin Arnoux

Chauvin Arnoux CA771 Voltage Indicator with RCD Trip Test Continuity Check CAT IV 1000 V　P01191771

IEC 61243-3:2009, EN 61243-3:2010, IEC 61010 1,000 V CAT IV. Voltage absence tester, User's guide in 5 languages, 2 x 1.5 V LR03/AAA batteries, 1 set of removable test probes Ø 2 mm with crystal safety cover, 1 probe-tip protection and 1 Velcro strap. CA771 Voltage Absence Tester (VAT) CAT IV 1000V. The CA771 is a Voltage Absence Tester with LEDs for voltages up to 1000 VAC/1400 VDC with audible extended continuity and phase rotation testing. The CA771 also offers trip testing of RCDs rated 30 mA (or less), as well as lighting of the test probe/point of measurement. 1000 VAC / 1400 VDC Designed for extreme temperature conditions -30°C to +60°C Single-pole phase test Extended continuity test with audible and visual indication. Two-pole phase sequence test with 2-wire method RCD trip testing and Detection of stray voltages Lighting of point of measurement IP65

Chauvin Arnoux

Chauvin Arnoux CA773 Voltage Indicator with RCD Trip Test Continuity Check CAT IV 1000 V　P01191773A

IEC 61243-3:2009, EN 61243-3:2010, IEC 61010 1,000 V CAT IV. Voltage absence tester, User's guide in 5 languages, 2 x 1.5 V LR03/AAA batteries, 1 set of IP2X removable test probes Ø 4 mm and 1 Velcro strap. C.A 773 IP2X Voltage Absence Tester (VAT) CAT IV 1000V. The C.A 773 IP2X Voltage Tester is a VAT with digital display and LEDs for voltages up to 1000 VAC/1400 VDC with with audible extended continuity and phase rotation testing. The Voltage Tester also offers trip testing of RCDs rated 30 mA (or less), as well as lighting of the test probe/point of measurement and digital display of the resistance and voltage. 1000 VAC / 1400 VDC Single-pole phase test Continuity andresistance test with audible and visual indication Two-pole phase sequence test with 2-wire method RCD trip testing and Detection of stray voltages Lighting of point of measurement. CAT IV 1000V IP65

Chauvin Arnoux

Chauvin Arnoux CA771 Voltage Indicator with RCD Trip Test Continuity Check CAT IV 1000 V　P01191771A

IEC 61243-3:2009, EN 61243-3:2010, IEC 61010 1,000 V CAT IV. Voltage absence tester, User's guide in 5 languages, 2 x 1.5 V LR03/AAA batteries, 1 set of IP2X removable test probes Ø 4 mm and 1 Velcro strap. CA771 IP2X Voltage Absence Tester (VAT) CAT IV 1000V. The CA771 IP2X is a Voltage Absence Tester with LEDs for voltages up to 1000 VAC/1400 VDC with audible extended continuity and phase rotation testing. The CA771 IP2X also offers trip testing of RCDs rated 30 mA (or less), as well as lighting of the test probe/point of measurement. 1000 VAC / 1400 VDC Designed for extreme temperature conditions -30°C to +60°C Single-pole phase test Extended continuity test with audible and visual indication. Two-pole phase sequence test with 2-wire method RCD trip testing and Detection of stray voltages Lighting of point of measurement IP65

Chauvin Arnoux

Chauvin Arnoux CA773 Voltage Indicator with RCD Trip Test Continuity Check CAT IV 1000 V　P01191773

IEC 61243-3:2009, EN 61243-3:2010, IEC 61010 1,000 V CAT IV. Voltage absence tester, User's guide in 5 languages, 2 x 1.5 V LR03/AAA batteries, 1 set of removable test probes Ø 2 mm with crystal safety cover, 1 probe-tip protection and 1 Velcro strap. C.A 773 Voltage Absence Tester (VAT) CAT IV 1000V. The C.A 773 Voltage Tester is a VAT with digital display and LEDs for voltages up to 1000 VAC/1400 VDC with with audible extended continuity and phase rotation testing. The Voltage Tester also offers trip testing of RCDs rated 30 mA (or less), as well as lighting of the test probe/point of measurement and digital display of the resistance and voltage. 1000 VAC / 1400 VDC Single-pole phase test Continuity andresistance test with audible and visual indication Two-pole phase sequence test with 2-wire method RCD trip testing and Detection of stray voltages Lighting of point of measurement. CAT IV 1000V IP65

Martindale

Martindale TEK 101 Non Contact Voltage Detector, 180V ac to 600V ac　RSTEK101

Martindale Non Contact Voltage Detector MARTEK101. Martindale TEK101 is a simple-to-use non-contact voltage indicator with audible and visual warnings and an extended probe tip for access to confined spaces. It is optimised for identifying energised conductors at voltages within the range 180 V to 600 V AC. Features include a unique built-in 50 Hz proving unit which tests the sensor operation, battery and LED. This unit proves the entire circuit is fully functional, avoiding the need for a separate proving unit. The tip design and optimised sensitivity make it possible to discriminate between adjacent live conductors. The high resolution capability of the TEK101 improves safety and saves time on-site. The pocket sized design conforms to CAT IV 1000 V safety regulations.

Gossen Metrawatt

Gossen Metrawatt PROFISAFE 690L Voltage Indicator Continuity Check CAT III 690 V, CAT IV 600 V　M630J

PROFISAFE 690L Voltage and Continuity Tester. PROFISAFE 690L (M630J) Voltage and Continuity Tester in accordance with DIN EN 61243-3 / VDE 0682-401. Voltage test Phase test Polarity test Phase sequence indication Continuity test Display: digital display 12 to 690 V Rugged housing Protection IP 65 Easy to operate, VDE-GS tested Measuring category: CAT IV 600 V / CAT III 690 V Test voltage: 6

Chauvin Arnoux

Chauvin Arnoux CA742 Voltage Indicator Continuity Check CAT IV 600 V　P01191742Z

EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011. Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate. The voltages indicated on the CA742 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA742. Chauvin Arnoux CA742 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( < 914-0021') 914-0021/ ) and with IP2X accessories ( < 914-0025') 914-0025/ ). The CA742 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA742 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Features and Benefits. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >300 kΩ Continuity testing Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g

Chauvin Arnoux

Chauvin Arnoux CA762 Voltage Indicator Continuity Check CAT IV 600 V　P01191762Z

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate. The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762. Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( < 914-0034') 914-0034/ ) and with IP2X accessories ( < 914-0037') 914-0037/ ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >400 kΩ Continuity testing Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ Phase rotation, 2-wire method Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g

Martindale

Martindale PD240 Voltage Indicator Proving Unit 2mA 240V dc　PD240

BS-EN61010-1 2001. Battery, belt clip, instruction manual. Not for use with Martindale VI13700G voltage indicators or Drummond test lamps. Martindale PD240 Pocket Sized Proving Unit. The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces. Features and Benefits. Output voltage 240 V + 4% DC at 2 mA, 3.5 mA maximum LED power indicator threshold180 V + 4% DC output Minimum operating battery level 5 V DC Operating temperature range -10 to 40 °C at maximum 70% RH Dimensions 144 x 63 x 31 mm Weight 180 g approximately (including battery)

Chauvin Arnoux

Chauvin Arnoux Clampmeter Case for use with F400 Series, F600 Series, MultiFix accessory　P01298076

F400 and F600 Series Soft Case. Bag equipped with an inner pocket and a wrist strap Dimensions: 120 x 300 x 60 mm