RS PRO

RS 1kΩ 0.25W Fixed Resistor ±5% -500 → +350ppm/°C and others

KOA

Small Carbon Resistor 100 Ω (1000 Pieces) 0.5 W　CFS12C101J*1000

SATO PARTS CO., LTD.

Male/Female 8mm for Hex Metal Spacer M3 and others

SATO PARTS CO., LTD.

Scalpel 8mm for hexagonal metal spacer M3 and others

Linkman

SPACER SUPPORT and others

Linkman

Small 1/2 W precision metal film resistance 3.6 Kohms and others

Linkman

Small 1/2 W precision resistance 5 ohms and others

Linkman

1/4 W carbon resistance 1 ohm (100 pieces) brown black gold and others

MAC EIGHT CO., LTD

Spacer Hex type for Printed Plates (M3 Type SP Type) 5 mm (100 pieces) and others

MAC EIGHT CO., LTD

Spacer Hex type for Printed Circuit Board (M3 type) SQ type 7 mm (100 pieces) and others

MAC EIGHT CO., LTD

Spacer for Printed Circuit Board Hex type (M 2.6 type) SQ type 10 mm (100 pieces)　2.6SQ10

MAC EIGHT CO., LTD

Spacer Hex type for Printed Plates (M2 Type) SP Type 8 mm (100 pieces) and others

MAC EIGHT CO., LTD

Spacer for Printed Circuit Board Hex type (M2 type) SQ type 10 mm (100 pieces)　2SQ10

RS PRO

RS PRO Digital RCD Tester, RCD Test Type AC, RCD Test Current 10mA　123-2240

Test Lead with IEC Connector, Neck Strap, User Manual RS Pro IRT1900 Digital RCD Tester, 500 mA Trip RS Pro IRT1900 is a cost-effective digital RCD tester with a custom microprocessor for maximum accuracy and reliability. The case features a new plastic material that resists impact and collision during work.
Features and benefits: Tripping Rated current: 10/20/30/100/300/500 mA Includes 3 LEDs to determine if wiring is correct 0 ° and 180 ° Phase angle switching for fast testing and consistent readout Visually displays reverse phase and neutral wires in socket Digital reading for trip time Dimensions: 180 x 130 x 70 mm Weight: approximately 800 g

Megger

Megger 1007-157 Insulation Tester Probe, For Use With MIT480　1007-157

Hard carry case, rubber boot with stand, silicone test lead set, SP5 remote switch probe, 5 off AA alkaline batteries & instructions (CD-ROM). MIT480 Series Telecom Insulation & continuity test. Telecommunication insulation and continuity testers developed to meet the special requirements of telephone line testing, as well as the requirements of electrical contractors and industrial testing to CATIV 600V. All instruments meet TNV3 as well as IEC1010, HD384 and BSEN61557. The insulation test inhibit voltage has been raised to 75V to overcome interference between cables experienced at lower voltages, compared to 50V for standard cable testing. All models: Complies with EN 61010-1 CATIV 600V safety rating 200mA & 20mA Continuity testing Insulation test voltage display 75V test inhibit TRMS and DC Voltage measurement Dual Digital Display and Analogue bar-graph Alkaline or NiMH rechargeable battery operation IP54 weatherproof housing Test lock allows the insulation test to be held on indefinitely MIT480 specific features 50V & 100V insulation testing 100Gohms insulation range. MIT481 additional features 50V, 100V, 250V, 500V, 1000V insulation tests 200Gohms insulation range Leakage current display kΩ resistance measurement Timer, PI and DAR insulation tests Insulation limit alarms 0.1nF to 10uF Capacitance measurement Cable length calculated from an adjustable cable capacitance reference (default 50nF/km). Test result storage (>1000) MIT485 additional features Result download Bluetooth capability (requires Bluetooth enabled PC or USB plus Bluetooth adaptor)

Amprobe

Amprobe IRDA-USB-Cable Insulation Tester Cable, For Use With Amprobe Testers　IRDA-USB-Cable

ProInstall Series USB Cable and Driver. The Telaris ProInstall Series have an IR (infrared) port which allows you to connect the tester to a computer and upload test data using a Amprobe PC software. This automates your troubleshooting or recording process, reduces the possibility of manual error and allows you to collect, organize, and display test data in a format that meets your needs.

Megger

Megger 1006-408 Electrical Installation Tester Case, Accessory Type Test & Carry Pouch, For Use With MFT1731 On-Site　1006-408

Megger Carry Pouch for MFT1700/1800 Series. Meggers padded carry case for use with MFT1700 and MT1800 series of testers. Manufactured from a hard wearing nylon fabric, featuring a main compartment, pocket under the lid for test leads and an external pocket for cables and accessories. Features and Benefits. Soft padded carry case. Nylon fabric. Internal pocket for storage

Megger

Megger 1007-463 Electrical Installation Tester Case, Accessory Type Large Soft Pouch with Extra Storage, For Use With　1007-463

Megger Large Pouch for MFT1700/1800 Series. Megger's carrying pouch with shoulder strap for use with MFT 1700 and MFT1800 series of testers. The case is able to house your installation tester and accessories, among other equipment. The main compartment is divided by flexible walls into five compartments which can be simply and quickly removed. The pouch has two side pockets which can store further accessories and the reinforced base is equipped with four non-slip rubber feet. Features and Benefits. External Dimensions: 30 x 24 x 21 cm (W ;font face="symbol">´ ;/font> D ;font face="symbol">´ ;/font> H). Flexible Storage Options. Reinforced base

Gossen Metrawatt

Gossen Metrawatt GTZ3229000R0001 Printer Paper, Accessory Type Recording Chart, For Use With PROFITEST PSI-BC Printer &　GTZ3229000R0001

Accessory for SECUTEST S2. Accessory for SECU TEST S2 testing device

Gossen Metrawatt

Gossen Metrawatt Z580B Insulation Tester Crocodile Clip, For Use With METRISO 5000 A　Z580B

METRISO 5000 A with fixed measuring leads and probe tips, 2 crocodile clips, batteries, carrying strap, operating instructions. METRISO 5000 A insulation tester. High-voltage insulation measurement device Additional measurement ranges of 10 kΩ → 1 TΩ Logarithmic display Measured voltages: 100 V, 250 V, 500 V, 1000 V, 1500 V, 2000 V, 2500 V, 5000 V Measurements to 2000 V in acc. with DIN VDE 0413 Measuring range 100 kΩ → 100 MΩ (1000 V) Voltage measurements to 2000 VDC / AC Guard connection to eliminate surface currents Optional crank inductor Power supply: 6 x 1.5 V single cells, IEC R20. Optional accessories. Generator 5000 A: crank inductor for Metriso 5000A (stock no.: < 327-4636') 327-4636 F2000: carry case for measuring instrument and accessories (stock no.: < 375-4069') 375-4069 KY 5000 A: crocodile clips 5 kV type (stock no.: < 327-4642') 327-4642 Guard 5000 A: guard cable and 1 crocodile clip (stock no.: < 327-4658') 327-4658

Gossen Metrawatt

Gossen Metrawatt Z580C Insulation Tester Lead, For Use With METRISO 5000 A　Z580C

METRISO 5000 A with fixed measuring leads and probe tips, 2 crocodile clips, batteries, carrying strap, operating instructions. METRISO 5000 A insulation tester. High-voltage insulation measurement device Additional measurement ranges of 10 kΩ → 1 TΩ Logarithmic display Measured voltages: 100 V, 250 V, 500 V, 1000 V, 1500 V, 2000 V, 2500 V, 5000 V Measurements to 2000 V in acc. with DIN VDE 0413 Measuring range 100 kΩ → 100 MΩ (1000 V) Voltage measurements to 2000 VDC / AC Guard connection to eliminate surface currents Optional crank inductor Power supply: 6 x 1.5 V single cells, IEC R20. Optional accessories. Generator 5000 A: crank inductor for Metriso 5000A (stock no.: < 327-4636') 327-4636 F2000: carry case for measuring instrument and accessories (stock no.: < 375-4069') 375-4069 KY 5000 A: crocodile clips 5 kV type (stock no.: < 327-4642') 327-4642 Guard 5000 A: guard cable and 1 crocodile clip (stock no.: < 327-4658') 327-4658

Gossen Metrawatt

Gossen Metrawatt Z700D Electrical Installation Tester Case, Accessory Type Case, For Use With MAVOWATT45, METRISO 5000　Z700D

PROFITEST 0100S-II+, socket, shock-proof plug, 2-pin adapter, cable for expanding to 3-pin adapter, 2 crocodile clips, carrying strap, batteries, operating instructions, ProtokollManager software, factory calibrated. VDE 0100 testing device, Profitest 0100S-II+. For checking of protection requirements in acc. with DIN VDE 0100 Part 610 and international regulations (e.g. IEC 364-6-61, HD 364-6-61.S1) Conforms to VDE 0413 Part 2, 3, 4, 5, 6, 7 and 9 Measures the contact voltage at rated fault current without activating the FI circuit breaker Start-up test of energy meters Determines cable lengths and approved fuse types Universal connection system thanks to replaceable plug inserts Large, backlit display Display of menus, circuit arrangements, help texts, measuring, reference and nominal values Signalling of connection faults and limit value overruns; counter flow direction Leak-current measurements taken directly by clip-on feeder, indirectly by rising test current Logging with instant printouts of the data tables via optional PSI module Software updates via IRDA interface Data transfer to PC via RS232 interface. Optional PSI Module-E / BC. PSI (Printer Storage Interface) acts as a printer, memory and interface for the PROFITEST 0100S-II Infrared and RS232 interface Data memory for approx. 4400 values from 200 current circuits PSI-E: numeric input of building and electrical circuit PSI-BC: alphanumeric input of building, distributor, FI, current circuit as well as faults PSI-BC: input via barcode reader. Power supply: 4 x AA batteries SI-BC: functions such as PSI-BC, and without printer. Support Accessories. Carrying bag (F2000) Paper rolls for PSI module (PS-10P) Colour cartridge for PSI module (Z3210)

Chauvin Arnoux

Chauvin Arnoux Earth & Ground Resistance Tester Kit, For Use With CA6472, CA6474　P01102024

NF EN 61010- IEC 61557. CA 6460 and CA 6462 Earth and Resistivity Testers. In their rugged, sealed housing, the CA 6460 and CA 6462 are easy to use and are designed specifically for operation in the field. The CA 6460 and CA 6462 help to establish a fast and accurate diagnosis with optimum comfort and safety. Use conventional stake methods (3- or 4-wire). Indicator lights warn of elements impacting measurement (noise or excessive resistance in the voltage circuit). The earth / resistivity kit must be ordered separately.

Megger

Megger DET3TC Earth & Ground Resistance Tester 2kΩ CAT IV 100 V　DET3TC

EN61010-1 CAT IV 150V & CAT III 300V. 2 earth test stakes, 3 connection leads, 8 x AA alkaline batteries, hard carry case, quick start guides, user guide on CD. DET3TC 3 Pole Earth Tester. 3 pole earth tester for measuring the resistance of earth rods and associated installations.,An ICLAMP selective earth clamp is available separately, and when used with the DET3TC allows the testing of an earth rod without the need for disconnection from the system. Resistance range 0.01 to 2000 ohms auto ranging Choice of 2 or 3 terminal measurements Simple one button operation Superior noise rejection to 40V pk-pk Measures earth voltage 0 – 300V Automatic P spike & C spike check Clamp input for no-disconnect testing (requires ICLAMP) Earth current range (with ICLAMP up to 19.9A)

Megger

Megger DET14C Earth & Ground Resistance Tester 1.5kΩ CAT IV 600 V　1000-761

(DET14C & DET24C):Carry case carry strap , User guide on CD, calibration check accessory, 4 x AA alkaline batteries. (DET24C only): USB IrDA dongle, USB lead & PowerDB lite software. Megger 1007-331 ( < 910-6810') 910-6810/ ) is a Bluetooth version of Megger 1000-762 ( < 705-9431') 705-9431/ ). DET14C & DET24C Earth Test Clamp. Ground resistance range : 0.050 Ω to 1500 Ω True RMS Ground leakage current range : 0.2 mA to 35 A Auto ranging & HOLD function 4 digit plus 6 digit backlit LCD display High and low resistance alarms 256 test results storage & recall Real time date & time stamping of results Oval clamp for easy access to earth cables & earth straps 37mm dia conductor & 50mm earth strap capacity Low maintenance flat jaw interface EN61010 Safety rating CATIV 600V Extended battery life. DET24C Additional Features. IrDA to USB interface for download 2000 test results storage PowerDB LiteTM software

Kewtech Corporation

Kewtech Corporation Lightmate Kit Mains Socket Tester, Accessory Type Adaptor, For Use With Light Fittings　Lightmate Kit

Lightmate Kit. Lightmates are the easiest way to test light fittings. The Light Mate Kit has 5 different light testing adapters (ES, BC, GU10, SES, SBC) is a great for testing all lighting circuits Lightmates are an essential testing accessory to facilitate fast and safe testing for Loop Impedance, and R1 and R2 Testing of Lighting Circuits

Chauvin Arnoux

Chauvin Arnoux P01102092A Insulation Tester Probe, For Use With C.A 6522 Insulation Tester, C.A 6524 Insulation Tester,　P01102092A

Chauvin Arnoux Remote Control Probe for Insulation Testing. Chauvin Arnoux remote control probe P01102092A is an accessory specially developed to make insulation tests in the field simpler and quicker. Insulation measurement can be triggered with a single press on the yellow button Equipped with a torch function which effectively illuminates the point of measurement Backlit screen makes measurement results visible at all times and in places with poor lighting

RS PRO

RS PRO Insulation Test Pistol　917-6301

RS Pro Tester Accessories GPT-9000 Series. A range of accessories for use with GPT/GPI-800 Series, GPT-9800 Series and GPT-9900 Series.

RS PRO

RS PRO Insulation Tester Lead　917-6305

RS Pro Tester Accessories GPT-9000 Series. A range of accessories for use with GPT/GPI-800 Series, GPT-9800 Series and GPT-9900 Series.

RS PRO

RS PRO Insulation Tester Lead　917-6314

RS Pro Tester Accessories GPT-9000 Series. A range of accessories for use with GPT/GPI-800 Series, GPT-9800 Series and GPT-9900 Series.

RS PRO

RS PRO ET5300 Earth & Ground Resistance Tester 2kΩ　144-5339

Megger

Megger DET3TD Earth & Ground Resistance Tester Kit　DET3TD

KOA

［Discontinued］Small Carbon Resistor 6.8 Ω (1000 Pieces) 0.5 W　CFS12C6R8J*1000

KOA

［Discontinued］Metal Coating Resistance 2 W 100 kΩ ± 2%　SN3DDC105G

KOA

［Discontinued］Metal Coating Resistance 1 W 100 kΩ ± 2%　SN3ADC105G

MAC EIGHT CO., LTD

［Discontinued］Condenser Spacer 35 phi (100 pieces)　TT16

MAC EIGHT CO., LTD

［Discontinued］Spacer Hex type for Printed Circuit Board (M4 type) SQ type 7 mm (100 pieces)　4SQ7

MAC EIGHT CO., LTD

［Discontinued］Spacer Hex type for Printed Plates (M 2.6 Type) SP Type 11 mm (100 pieces)　2.6SP11

TAKACHI ELECTRONICS ENCLOSURE Co., Ltd.

［Discontinued］DC Hollow Juracon (R) Spacer (20pcs) and others

TAKACHI ELECTRONICS ENCLOSURE Co., Ltd.

［Discontinued］DS Type Hexagonal Juracon (R) Spacer (20pcs) and others