Multimeters & Accessories
Filters
-
RS PRO Multimeter Leads Fused Probe Kit, Fused, CAT III 1000V 204-583
Light angle versions are not recommended for use with Megger BM100, BM101, Thurlby 1905, 1503, Fluke 8010, 8050, Wavetek DM25XL, DM93, DM98, AVO 8, AVO 2001, or ITT MX112 multimeters. For these models, the straight version is preferable.
RS Pro Fused Test Lead 1000 V CAT III1 products found
JPY: 12,100
USD: 75.85
-
RS PRO Multimeter Leads , Fused, CAT III 600V 212-988
3 Phase Test Lead, 600 V CAT III
Blue, yellow and red lead with stretchable shroud plug 3 phase voltage or conduction measuring probe rated at 600 V CAT III. 50 kA, 1000 V, 500 mA fuses protect from electrical arcs Each probe comes with a secure mouth clip and finger guard Also comes with 1 probe tip and can use any of 3 leads as a prod1 products found
JPY: 10,800
USD: 67.70
-
RS PRO Crocodile Clip 816-170
Test Clip Set
Test lead clip to pair crocodile clips 1000 V Cat II/600 V CAT III1 products found
JPY: 2,830
USD: 17.74
-
RS PRO Multimeter Current Clamp Adapter, 1000A, 1000A ac, 51mm 123-3224
Battery (Filled), Coiled Cable Output Plug, Carrying Case, User Manual • RS Pro ICA39T Current Clamp Adapter • RS Pro brand ICA39T series clamp adapter.
Features and benefits: 1.9% basic A dc/A ac accuracy Non-intrusive conversionConductor with a maximum diameter of 29 mmImpact resistance (can withstand a 5 foot drop) Coiled cable output plugergonomically designed joe and triggerCurrent capacity: 1000 A ac Automatic 0 key for DCARed LED - Low battery displayGreen LED - Power on displayInsulated input jack Standard 9 V battery safety standard: CAT IV 600 V/CAT III 1000 V Detection type: Hall effect1 products found
JPY: 18,400
USD: 115.34
-
RS PRO Multimeter Current Clamp Adapter AC, 51 (Dia.)mm 123-8651
RS Pro ICA 15 AC Current Adapter The RS Pro ICA 15 AC current adapter is designed to plug into an IDM 17 probe-style multimeter.
Features and Benefits: Current Capacity: 300 A ac Basic ACA Accuracy: 1.9% Non-intrusive conversion Supports conductors up to 29 mm in diameter Ergonomically designed jaw and trigger Hand protection Design CAT. II 600 V Safety Standard1 products found
JPY: 5,080
USD: 31.84
-
RS PRO Multimeter Leads Automotive Test Lead Kit 124-7400
If necessary, the relevant IEC1010 (BS EN61010) grades are listed on the kit components.
RS Pro In-Vehicle Test Kit1 products found
JPY: 27,400
USD: 171.76
-
RS PRO Test Probe, 10A 124-7403
Extended back probe set, black/red
RS Pro red/black extended back probe with 44 mm long sturdy spring steel contacts1 products found
JPY: 2,930
USD: 18.37
-
RS PRO Test Probe, 10A 124-7404
Right-Angle Back Probe Lead Set
RS Pro Back Red/black right-angle probes allow you to measure in tight spaces. The mounted silicon lead has a socket so it can be connected to any standard 4mm plug.1 products found
JPY: 4,540
USD: 28.46
-
RS PRO Multimeter Leads Test Lead Kit Automotive Back Probe with Cable Piercer Adapter 124-7405
Back Probe with Through-Cable Adapter
RS Pro The ultra-thin red/black back probe has a through-cable adapter, allowing the probe to penetrate small cables. Just apply a little pressure to penetrate. Ideal for connecting to fuel injectors, MAP/TPS sensors, and weather-pack seal connectors. This modular design supports all industry-standard 4mm plugs with or without a shroud. Perfect for any test lead With an innovative adapter, you can push through small cables with your finger. This minimizes the risk of cable damage.1 products found
JPY: 1,360
USD: 8.53
-
RS PRO Multimeter Leads Test Lead Kit Automotive Long Reach Sharp Prod, CAT II 1000V 124-7406
Very Sharp Long Reach Probe Set
This insulated probe has a sturdy 155 mm stainless steel shaft, making it ideal for inspecting hard-to-reach areas. The tip of the probe is sharp so it can be inspected over rust, paint, and other barriers. Supports all standard 4mm test leads with a 4mm socket on the rear.1 products found
JPY: 2,370
USD: 14.86
-
RS PROMultimeter Test Lead Test Lead, Fused 125-3730
Fused Test Lead Set for Loop and RCD Testers
This auxiliary test lead is designed for use with a variety of earth-loop impedance and RCD testers. Both red and black probes have fuses for high safety. We also have a pair of mouth clips for safety with shroud.1 products found
JPY: 12,200
USD: 76.48
-
RS PROMultimeter Test Lead Test Lead Kit, Fused, CAT III 1000 V 125-3731
When used with high performance test leads, the protection and safety standards of the test meter itself should be considered.
Test leads and clips are provided in pairs, one red and one black.1 products found
JPY: 9,870
USD: 61.87
-
RS PROMultimeter Test Lead Fused Probe Kit, Fused, CAT III 1000 V 125-3732
When used with high performance test leads, the protection and safety standards of the test meter itself should be considered.
Test leads and clips are provided in pairs, one red and one black.1 products found
JPY: 9,690
USD: 60.74
-
RS PROMultimeter Test Lead Test Lead Kit, CAT III 1000 V 125-3733
When used with high performance test leads, the protection and safety standards of the test meter itself should be considered.
1 pair of test leads with shrouded right-angle 4 mm plug and 14 mm metal-tipped test prod, 1 pair of push-fit wire mouth clips, 1 pair of reduced-diameter end clips1 products found
JPY: 6,780
USD: 42.50
-
RS PROMultimeter Test Lead Fused Test Prods, Fused, CAT III 1000 V 125-3734
When used with high performance test leads, the protection and safety standards of the test meter itself should be considered.
Test Probe with Fuse, 1000 V, GS381 products found
JPY: 6,300
USD: 39.49
-
RS PROMultimeter Test Lead Test Lead Kit, CAT III 1000 V 125-3735
The safety work voltage is determined by the combination of these leads and the test meters to which they are connected. Before using these high-performance multimeter test read sets on a test meter, check the protection, fuses, and safety rating of the test meter itself.
Test Lead Set, 1000 V1 products found
JPY: 8,340
USD: 52.28
-
RS PRO Fused Test Prod 125-3737
EN61010
When using with high-performance test leads, the protection function and safety standards of the test meter itself should be considered.1 products found
JPY: 4,500
USD: 28.21
-
RS PRO Crocodile Clip 125-3738
RS Pro Mouth Clip (For Fused Test Probe)
GS38 Mouth clip for use with fused test leads and probes.1 products found
JPY: 3,690
USD: 23.13
-
RS PRO Crocodile Clip 125-3740
EN61010
When using with high-performance test leads, the protection function and safety standards of the test meter itself should be considered.1 products found
JPY: 2,180
USD: 13.67
-
Chauvin Arnoux Multimeter Current Clamp Adapter P01120660
1 x Flexible Current Sensor, 2 x 1.5 V AA Batteries/2 x LR6 Alkaline Batteries, 1 x User Manual in 5 Languages, 1 x Safety Data Sheet and 1 x Certificate of Authenticity
Chauvin Arnoux MiniFlexR Current Sensor MA110 Series1 products found
JPY: 114,000
USD: 714.60
-
Chauvin Arnoux Multimeter Current Clamp Adapter P01120662
1 x Flexible Current Sensor, 2 x 1.5 V AA Batteries/2 x LR6 Alkaline Batteries, 1 x User Manual in 5 Languages, 1 x Safety Data Sheet and 1 x Certificate of Authenticity
Chauvin Arnoux MiniFlexR Current Sensor MA110 Series1 products found
JPY: 149,000
USD: 933.99
-
Chauvin Arnoux MA130-250 Multimeter Current Clamp Adapter AC, 70mm P01120663
3 x Flexible Current Sensors, 2 x 1.5 V AA/LR6 Alkaline Batteries, 1 x User Manual in 5 Languages, 1 x Safety Data Sheet, 1 x Certificate, 1 set of Colored Ring for Cable Identification/Misconnection Prevention, 3 x Female BNC/4 mm Osplug Adapters
Chauvin Arnoux MiniFLEX MA130 Series Small Flexible Current Sensors1 products found
JPY: 311,000
USD: 1,949.48
-
Chauvin Arnoux Multimeter Current Clamp Adapter P01120630
1 x Flexible Current Sensor, 2 x 1.5 V AA/LR6 Alkaline Batteries, 1 x User Manual in 5 Languages, 1 x Safety Data Sheet, 1 x Certificate
Chauvin Arnoux AmpFLEXR A110 Series Flexible Current Sensors1 products found
JPY: 129,000
USD: 808.63
-
Chauvin Arnoux Multimeter Current Clamp Adapter P01120632
1 x Flexible Current Sensor, 2 x 1.5 V AA/LR6 Alkaline Batteries, 1 x User Manual in 5 Languages, 1 x Safety Data Sheet, 1 x Certificate
Chauvin Arnoux AmpFLEXR A110 Series Flexible Current Sensors1 products found
JPY: 216,000
USD: 1,353.98
-
Hirschmann Test & MeasurementMultimeter Test Lead 932961001 Test Equipment Set 932961001
PMS 2 Miniature Set. High quality 2mm test lead set suitable for testing smaller components and installations.Kit comprises of:,Red and black test probes ,Red and black test hooks,Red and black crocodile clips,Red and black 1m test leads (stackable),Maximum working voltage 60V d.c.
1 products found
JPY: 11,500
USD: 72.09
-
CatuMultimeter Test Lead DX02001 Test Probe, CAT III 1000 V DX02001
IEC 1010. Pointest test probes. Test probes offering ease of use and complete safety. These probes are fully compatible with all 4 mm diameter safety terminals. The visible metal part is limited to 19mm to prevent any risk of short-circuit. However, its shape allows access to the connections at the bottom of the recess to a depth of 26mm, where traditionalprobes cannot operate. Available in pairs (red and black) in a version with 4-mm retractable plug or 1.2 metre lead.
1 products found
JPY: 9,890
USD: 62.00
-
CatuMultimeter Test Lead DX02002 Test Probe, CAT III 1000 V DX02002
IEC 1010. Pointest test probes. Test probes offering ease of use and complete safety. These probes are fully compatible with all 4 mm diameter safety terminals. The visible metal part is limited to 19mm to prevent any risk of short-circuit. However, its shape allows access to the connections at the bottom of the recess to a depth of 26mm, where traditionalprobes cannot operate. Available in pairs (red and black) in a version with 4-mm retractable plug or 1.2 metre lead.
1 products found
JPY: 15,400
USD: 96.53
-
Gossen Metrawatt Cable Set, For Use With METRAmax2 GTY3620034P0002
Accessories for METRA HIT multimeter
1 products found
JPY: 11,900
USD: 74.59
-
Gossen Metrawatt Cable Set, For Use With Metrahit 28S, Metrahit 29S Z229A
Accessories for METRA HIT multimeter
1 products found
JPY: 26,000
USD: 162.98
-
Chauvin Arnoux P01298033 Shoulder bag 5000 series P01298033
C.A 5000 Series Analogue Multimeters. Range of analogue multimeters for safe measurement of direct or alternating currents. Shockproof case with a "Multistand" multi-purpose fold-away stand for use at worksites as well as in the lab. Analogue display with anti-parallax mirror for voltage scales. The C.A 5005 multimeter is supplied with an MN89 mini-clamp and "Voltest" function to test for voltage on resistance and continuity tests. Two versions, available in a carry cases with steel hinges for safe storage, protection and transport. AA alkaline batteries (stock no.: < 591-225') 591-225 also available separately from the catalogue. Class: IEC 61010-1, category III / 600 V (C.A 5001); IEC 61010-1, category III / 1000 V (C.A 5005)
1 products found
JPY: 22,000
USD: 137.91
-
RS PRO Crocodile Clip, For Use With Multimeter 340-2566
EN61010. Account should be taken of the protection features and safety ratings of the test meter itself when combined with high specification test leads. Professional Test Lead Accessories. A range of accessories with 4 mm shrouded socket connections intended for use with the multimeter test lead set ; 340-2538 340-2538. All accessories meet the requirements of EN61010 to their rated voltage. Accessories. RS Sprung Hook Grabbers 1000 V CAT III, ; 340-2544 340-2544 RS Pro GS38 fused test prods 1000 V CAT III fitted with 1000 V / 50 mA / 50 kA fuses, ; 340-2550 340-2550 RS Pro Crocodile Clips 1000 V CAT III, ; 340-2588 340-2588 RS Pro Fused Crocodile Clips 600 V CAT III fitted with 1000 V / 500 mA / 50 kA fuses, ; 340-2566 340-2566. RS Pro Thin Fine Insulated Prod Set 1000 V CAT III, ; 2627770 2627770. RS Pro Shutter lantern probe comprising 1 pair (red and black) shuttered 4 mm probes ; 2627786 2627786
1 products found
JPY: 6,310
USD: 39.55
-
SchutzingerMultimeter Test Lead SPL2400 Test Lead Kit, CAT II 1000 V SPL2400
Test Set SPL2400. Multi-head test lead set with 4 probe profiles to choose from Interchangeable and reversible probe heads allow multiple combinations of connection and contact Consists of a sprung point to 4mm plug (with hard point), which is reversible 2mm and 2.4mm plugs Each probe screws firmly into main body A tip protection cap can be used with the sprung point The cap can be used as a tool to screw in probe heads The angled 4mm shrouded connecting plugs and leads give a full reach of 1 metre Rated to 1000V CAT II Rated current 4mm 32A, 2.4mm 12A, 2mm 10A
1 products found
JPY: 13,300
USD: 83.37
-
SchutzingerMultimeter Test Lead SET3227 Probe Set SET3227
4mm Safety Test Prods. A general purpose safety test set with 4mm shrouded leads, test probes and crocodile clips. Tip protection heads included with probes.
1 products found
JPY: 14,100
USD: 88.39
-
Schutzinger Test & Measurement Kit SET 3177
2mm Test and Measurement kit. 2mm test and meaurement kit for 30Vac/ 60Vdc nominal voltage and 10A nominal current Supplied in a robust transparent box
1 products found
JPY: 7,480
USD: 46.89
-
Hirschmann Test & MeasurementMultimeter Test Lead 935982256 Test Lead Kit 935982256
Standard Test Lead Set. Silicone rubber leads, probes and prods, supplied together with other useful test connectors. Max. working voltage: 50Va.c.
1 products found
JPY: 15,500
USD: 97.16
-
MeggerMultimeter Test Lead 1001-883 Test Lead Kit, CAT IV 300 V 6231-592
Instructions, mains plug test leads, 3-wire test lead set with crocodile clips, 8 x AA alkaline batteries, neck strap. LT310 ; 320 Non Tripping Loop Tester Accessories. Two non-tripping loop impedance testers that comply with EN61557 part 3 for testing, measureing or monotoring of protective measures. RCDs rated 30mA or greater are not tripped, even electronic RCDs 3-wire low current non tripping loop test measure 0.01Ω to 2kΩ (autoranging) with resolution 0.01Ω up to 10Ω Two wire high -current test is selctable where RCD connection is not an issue 1A to 23kA prospective fault current (PSCC) display LED indication of correct supply and test lead connection 3-phase safe - will not be damaged if connected across phases 100V to 280V suitable for single-phase testing Supply voltage measurement range Clear 20mm high digit LCD display with analogue arc bargraph Tough rubber armoured case with self contained cover that locks away underneath the instrument during use Designed to hang comfortably around the neck when in "hands free" use Easy-to-use with colour coded ranges to help in the test range selection Safety input terminal interlock - prevents unsafe connection of test leads Safety lockout prevents the test from operating when the circuit voltage is >280V (LT310) or >480V (LT320) Meets the requirements of BSEN 61010-1 for safe connection t a 440V Installation Category III supply (300V Phase to Earth) Weatherproof to IP54. LT320 model additional features:. 50V to 480V operating range allows single and three-phase testing 25Hz to 450Hz frequency measurement range Phase rotation indicator Max Zs display R1+R2 is calculated and displayed Backlit display and range selection ideal for low light environments
1 products found
JPY: 22,100
USD: 138.53
-
RS PRO Crocodile Clip, For Use With Multimeter 493-5556
3 Phase Test Leads, 600V CAT III. Blue, yellow and red leads with retractable shroud plugs 3 phase voltage or continuity measurements Probes are rated at 600 V CAT III and fitted with a 50 kA, 1000 V, 500 mA fuse to protect against electrical arcs Each probe is fitted with a safety crocodile clip along with finger guards Also a single probe tip is supplied so that one of the three leads can be used as a prod
1 products found
JPY: 5,830
USD: 36.55
-
Multi ContactMultimeter Test Lead 99.00047 Test Lead, CAT II 1000V 99.00047
4mm Test Leads with 4mm Sprung Probes. Safety test lead set comprising of 1 red and 1 black:. 1m PVC flexible leads 1mm 2 cross section 4 mm sprung test probe to straight shrouded 4mm plug Protective caps for test connection to IC s (leg spacing 2.54 mm) Rated 1000 V, CAT III 19 A
1 products found
JPY: 7,890
USD: 49.46
-
RS PROMultimeter Test Lead Multi Pin Connector Test Kit, CAT II 1000 V 731-5286
Multipin connector Test lead kit. Purpose designed kit to provide a safe solution to probing high density mulipole connectors. The unique design avoids the dangers of shorting electrical contacts and the risk of dropping pins or other foreign bodies into sensitive or critical equipment. The various sized male / female contact pins supplied suit applications in the majority of multipin connectors including Mil-C, Industrial & circular plastic connectors , D-Sub, XLR & PCB headers. Compatible with all standard shrouded 4mm instrument sockets Applications include aeronautical, military, automotive and computer equipment testing Complies with EN61010-1 CAT III 600V Lead length: 1.2m Kit comprises 1 each red & black insulated silicone test lead with standard 4mm shrouded right angle plug end and unique screw-in pin socket at the other end. 2 sets of 4 screw in pins each with a male & female contact. 1 green double insulated earth lead with detatchable crocodile clip. 1 each red and black extender bar Supplied in durable plastic case with custom two colour foam cutouts that instantly identify if any of the pins are missing.
1 products found
JPY: 47,000
USD: 294.62
-
Hirschmann Test & MeasurementMultimeter Test Lead 972337002 Test Probe Kit, CAT II 1000 V, CAT III 1000 V 972337002
Hirschmann Test ; Measurement Multimeter Safety Probe Set. Brought to you by Hirschmann Test ; Measurement, a safety test probe set conforming to IEC 1010 safety requirements. The sharp contact tips can penetrate the insulation and oxide layers and are protected by removable safety caps. Contact area also duals as a 4mm plug so they may be connected to any 4mm standard socket. Assemblies are 1 m long and cable is 1 mm² PVC. Rated to 1000V CAT II, a.c./16A. All models are highly reliable and excellent quality. Features and Benefits. Sharp probe tips for ease of use Durable and long lasting Connects to any 4 mm standard socket 1000 V CAT II. What are test leads?. These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. What are test probes?. Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Hirschmann Test ; Measurement, each probe provides much-needed precision. What are the differences between safety categories?. For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.
1 products found
JPY: 7,360
USD: 46.14
