[Gossen Metrawatt] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
Factory Work Tools & Supplies
-
Production Processing Equipment
-
Gossen Metrawatt Cable Set, For Use With METRAmax2 GTY3620034P0002
Accessories for METRA HIT multimeter
1 products found
JPY: 11,900
USD: 74.04
-
Gossen Metrawatt Cable Set, For Use With Metrahit 28S, Metrahit 29S Z229A
Accessories for METRA HIT multimeter
1 products found
JPY: 26,000
USD: 161.77
-
Gossen Metrawatt Centigrade Probe Thermometer Suitable For Various Applications GTZ3409000R0001
Temperature sensor. Z3409. Standard probe for surface and immersion measurements. TF220. Waterproof probe for trouble-free measurements in gases and liquids. Chip set. Comprises 10 attachable miniature probes for pin-point measurements at small measuring locations
1 products found
JPY: 46,700
USD: 290.57
-
Gossen Metrawatt GTZ3229000R0001 Printer Paper, Accessory Type Recording Chart, For Use With PROFITEST PSI-BC Printer & GTZ3229000R0001
Accessory for SECUTEST S2. Accessory for SECU TEST S2 testing device
1 products found
JPY: 70,800
USD: 440.52
-
Gossen Metrawatt METRAwin 10 Data Logging Multimeter Software, Cable included GTZ3240000R0001
METRAwin 10 / METRAHit. System software for METRAHIT multimeter Compatible interface adapters are available separately Data logger and mathematics functions Yt- and XY-diagram Line recorder Compatible with METRAHIT EBASE, ETECH, EXTRA, OUTDOOR, ESPECIAL, X-TRA, ONE PLUS, 16T/U/I, 22S → 30M. Interface Adaptor. BD232 - IR/RS232 (RS stock no.: < 292-1325') 292-1325 USB-Hit - IR/USB (RS stock no.: < 493-7928') 493-7928
1 products found
JPY: 64,800
USD: 403.19
-
Gossen Metrawatt GTZ3302000R0001 Soft Case Metrahit GTZ3302000R0001
Accessories for METRA HIT multimeter
1 products found
JPY: 28,000
USD: 174.22
-
Gossen Metrawatt Z580B Insulation Tester Crocodile Clip, For Use With METRISO 5000 A Z580B
METRISO 5000 A with fixed measuring leads and probe tips, 2 crocodile clips, batteries, carrying strap, operating instructions. METRISO 5000 A insulation tester. High-voltage insulation measurement device Additional measurement ranges of 10 kΩ → 1 TΩ Logarithmic display Measured voltages: 100 V, 250 V, 500 V, 1000 V, 1500 V, 2000 V, 2500 V, 5000 V Measurements to 2000 V in acc. with DIN VDE 0413 Measuring range 100 kΩ → 100 MΩ (1000 V) Voltage measurements to 2000 VDC / AC Guard connection to eliminate surface currents Optional crank inductor Power supply: 6 x 1.5 V single cells, IEC R20. Optional accessories. Generator 5000 A: crank inductor for Metriso 5000A (stock no.: < 327-4636') 327-4636 F2000: carry case for measuring instrument and accessories (stock no.: < 375-4069') 375-4069 KY 5000 A: crocodile clips 5 kV type (stock no.: < 327-4642') 327-4642 Guard 5000 A: guard cable and 1 crocodile clip (stock no.: < 327-4658') 327-4658
1 products found
JPY: 15,500
USD: 96.44
-
Gossen Metrawatt Z580C Insulation Tester Lead, For Use With METRISO 5000 A Z580C
METRISO 5000 A with fixed measuring leads and probe tips, 2 crocodile clips, batteries, carrying strap, operating instructions. METRISO 5000 A insulation tester. High-voltage insulation measurement device Additional measurement ranges of 10 kΩ → 1 TΩ Logarithmic display Measured voltages: 100 V, 250 V, 500 V, 1000 V, 1500 V, 2000 V, 2500 V, 5000 V Measurements to 2000 V in acc. with DIN VDE 0413 Measuring range 100 kΩ → 100 MΩ (1000 V) Voltage measurements to 2000 VDC / AC Guard connection to eliminate surface currents Optional crank inductor Power supply: 6 x 1.5 V single cells, IEC R20. Optional accessories. Generator 5000 A: crank inductor for Metriso 5000A (stock no.: < 327-4636') 327-4636 F2000: carry case for measuring instrument and accessories (stock no.: < 375-4069') 375-4069 KY 5000 A: crocodile clips 5 kV type (stock no.: < 327-4642') 327-4642 Guard 5000 A: guard cable and 1 crocodile clip (stock no.: < 327-4658') 327-4658
1 products found
JPY: 45,700
USD: 284.35
-
Gossen Metrawatt Z700D Electrical Installation Tester Case, Accessory Type Case, For Use With MAVOWATT45, METRISO 5000 Z700D
PROFITEST 0100S-II+, socket, shock-proof plug, 2-pin adapter, cable for expanding to 3-pin adapter, 2 crocodile clips, carrying strap, batteries, operating instructions, ProtokollManager software, factory calibrated. VDE 0100 testing device, Profitest 0100S-II+. For checking of protection requirements in acc. with DIN VDE 0100 Part 610 and international regulations (e.g. IEC 364-6-61, HD 364-6-61.S1) Conforms to VDE 0413 Part 2, 3, 4, 5, 6, 7 and 9 Measures the contact voltage at rated fault current without activating the FI circuit breaker Start-up test of energy meters Determines cable lengths and approved fuse types Universal connection system thanks to replaceable plug inserts Large, backlit display Display of menus, circuit arrangements, help texts, measuring, reference and nominal values Signalling of connection faults and limit value overruns; counter flow direction Leak-current measurements taken directly by clip-on feeder, indirectly by rising test current Logging with instant printouts of the data tables via optional PSI module Software updates via IRDA interface Data transfer to PC via RS232 interface. Optional PSI Module-E / BC. PSI (Printer Storage Interface) acts as a printer, memory and interface for the PROFITEST 0100S-II Infrared and RS232 interface Data memory for approx. 4400 values from 200 current circuits PSI-E: numeric input of building and electrical circuit PSI-BC: alphanumeric input of building, distributor, FI, current circuit as well as faults PSI-BC: input via barcode reader. Power supply: 4 x AA batteries SI-BC: functions such as PSI-BC, and without printer. Support Accessories. Carrying bag (F2000) Paper rolls for PSI module (PS-10P) Colour cartridge for PSI module (Z3210)
1 products found
JPY: 64,100
USD: 398.83
-
Gossen Metrawatt Z104A Soft Case METRAmax 2, METRAmax 3, METRAmax 6 Z104A
Multimeter, battery, operating instructions. Analogue Multimeter METRAmax 2. Outstanding overload capacity — ideal for teaching and training Zero scale mark can be set at centre or on left Automatic battery switch-off. Voltage measurements from 0 → 100 / 300 mV / 1 VDC; 0 → 3 / 10 / 30 / 100 / 300 VAC / DC Current measurement 0 → 100 μA / 1 / 10 / 100 mA / 1 / 3 A AC / DC Left / centre zero point Accuracy: Class 2 DC; 3 AC Dimensions: 100 x 140 x 35 mm; weight: approx. 0.3 kg including battery
1 products found
JPY: 28,600
USD: 177.95
-
Gossen Metrawatt METRAVOLT 12D+L Voltage Indicator Continuity Check CAT IV 1000 V M630G
Operating instructions, battery. Metravolt 12D+L Voltage and Continuity Tester. The Metravolt 12D+L is a 2-pole voltage tester with digital display combined with integrated continuity, phase, polarity and phase sequence testing. The voltage tester allows for safe detection and measurement of AC and DC voltages within a range of 24 to 1000 V at frequencies of up to 4 kHz Resistance can also be measured within a range of 0 to 1999 kΩ with the integrated continuity tester Voltage and resistance values appear in digital format at the LCD Three LEDs indicate dangerous contact voltage and phase sequence, another LED indicates resistance and a sound generator indicates continuity Fully Automated Measuring Sequence Measured Value Storage Self-Test and Battery Monitoring Rugged Housing Complies with CAT IV
1 products found
JPY: 121,000
USD: 752.86
-
Gossen Metrawatt DUSPOL expert 1000 Voltage Indicator Continuity Check CAT III 1000 V, CAT IV 600 V M611E
EN 61326 Part 1, CAT IV 600 V / CAT III 1000 V. DUSPOL expert 1000 Voltage Tester. The DUSPOL expert 1000 voltage tester is rated for DC and AC voltage tests in a voltage range from 12 V to 1000 V. With DC voltage, it is possible to perform polarity tests and with AC voltage, it is also possible to perform phase tests with these instruments The DUSPOL expert 1000 voltage tester shows the phase sequence of a 3-phase current system, provided the neutral point is grounded Voltage testing Phase sequence test Phase testing Polarity check Cable fracture detector Continuity test Load connection via vibration motor Vibrating alert: the integrated motor with unbalance signals activity during load testing by generating vibrations in the tester handle Illumination of measuring points Rugged housing design with rubberized handle surface Protection class: IP 65 Power supply: 2 x 1.5 V LR03 / AAA
1 products found
JPY: 21,200
USD: 131.91
-
Gossen Metrawatt M702G Memory and Input Module, For Use With SECUTEST SI+ M702G
SECUTEST SI+ Memory and Input Module. The SI (Storage Interface) module SECUTEST SI+ is a special accessory for the test instruments of the SECUTEST / SECULIFE ST, PROFITEST 204 and METRISO 5000 D-PI series. Real-time clock with date function: battery buffered Data memory: (only SECUTEST ../SECULIFE ST) measurement values can be stored for up to 500 protocols Alphanumeric keyboard: Test results can be annotated for the SECUTEST ../ SECULIFE ST, METRISO 5000 D-PI and PROFITEST 204 test instruments, e.g. specific data on system, DUT, customer and repair Data interfaces: for tester: RS232, for PC: RS232 and USB
1 products found
JPY: 210,000
USD: 1,306.62
-
Gossen Metrawatt PROFISAFE 690L Voltage Indicator Continuity Check CAT III 690 V, CAT IV 600 V M630J
PROFISAFE 690L Voltage and Continuity Tester. PROFISAFE 690L (M630J) Voltage and Continuity Tester in accordance with DIN EN 61243-3 / VDE 0682-401. Voltage test Phase test Polarity test Phase sequence indication Continuity test Display: digital display 12 to 690 V Rugged housing Protection IP 65 Easy to operate, VDE-GS tested Measuring category: CAT IV 600 V / CAT III 690 V Test voltage: 6
1 products found
JPY: 42,300
USD: 263.19
-
Gossen Metrawatt Multimeter Current Clamp Adapter Z219C
Current Sensors. No current circuit interruption No galvanic connection to the conductor Current surges in the network do not cause the multimeter to overload
1 products found
JPY: 79,400
USD: 494.03
-
［Out of stock］Gossen Metrawatt METRISO 5024, Insulation Tester 400MΩ CAT II 600 V M540E
METRISO 5024, carry case, spare fuse, instruction manual. METRISO 5024 insulation testing device. Analogue insulation measuring device, low-impedance measuring device and voltmeter with beeper in one device Quick measurements in accordance with VDE 0413 part 1 / 2 / 4 Insulation measurements with measuring voltages of 100, 250, 500 V Low-impedance measurements of earth wire and potential wire resistance, continuity Beeper and flashing LED as alarm for faulty or implausible measurements Fluctuating indicator as final indicator of warning functions
1 products found
JPY: 202,000
USD: 1,256.84
-
［Out of stock］Gossen Metrawatt METRAHit 2A Analogue Multimeter 15A 500V M101A
Multimeter (excluding battery and cable set), instructions. Analogue Multimeter METRA HIT 1A/2A. Basic analogue multimeter with robust plastic casing Broad scope of application thanks to a large number of measurement ranges Battery for resistance measurement: 1x mignon cell AA 1.5 V. Additional features 2 A. Extended current measurement: up to 15 A AC / DC Accuracy: Class 2.5. Optional accessories. Batteries: AA, pack of 10 (stock no.: < 591-225') 591-225 Measuring cable set KS17-2 (stock no.: < 292-1296') 292-1296
1 products found
JPY: 122,000
USD: 759.08
-
［Out of stock］Gossen Metrawatt METRAHIT PM PRIME Handheld Digital Multimeter, 10A ac 600V ac 10A dc 600V dc M248A
KS17-2 cable set, AA batteries, condensed operating instructions in English and German, CD-ROM with operating instructions in multiple languages, DAkks calibration certificate and a protective rubber holster. METRAHIT ULTRA Precision TRMS Multimeter with IR Remote Control. The METRAHIT ULTRA M248A is a precision high resolution TRMS system digital multimeter with IR remote control capability, temperature measurement and data logging for demanding, universal applications in the laboratory or out in the field on service calls. Technical Details. Triple display with a resolution of ±310,000 digits. Intrinsic error: ± (0.02% rdg. + 20 digits). Measuring functions: 1 μV to 600 VDC and 10 μV to 600 VAC/AC+DC TRMS (bandwidth: 15 Hz to 100 kHz); 1 nA to 10 ADC and 10 nA to 10 AAC/AC+DC TRMS (bandwidth: 15 Hz to 10 kHz). Resistance, frequency, capacitance and temperature measurement: 1 mΩ to 30 MΩ, 0.001 Hz to 1 MHz, 1 pF to 3 mF; °C/°F Pt100, Pt1000, type K thermocouple: -270 to +1372 ºC. Automatic range selection and battery cutoff. Min-Max measured value storage. Integrated 2 MByte measurement data memory for approx. 300,000 measured values, sampling rate: 100 ms to 9 hrs. IR data interface (this instrument can be controlled via the IR interface with optional accessory Z216C - RS Stock No ; 606-3776 606-3776 ). CAT IV @ 300 V or CAT III @ 600 V per IEC 61010-1. DAkkS calibration certificate as standard feature. Applications. Instruments included in the Gossen high-resolution series are extremely rugged, reliable digital multimeters with housings made of impact resistant ABS. With a resolution of 310,000 digits and roughly 30 different measuring functions, they ‘ve been developed for professional use. Features. RMS value with distorted waveform. Activatable filter for V AC measurement. Automatic / manual measuring range selection. Three Connector Jacks with Automatic Blocking Sockets (ABS). Overload protection. Measurement with Current Clamp Transformers and Sensors. Fast acoustic continuity test. Automatic storage of measured values. Storage of min-max values. Memory mode operation. Battery charging status - power saving circuit. Protective cover for harsh conditions. Data interfaces
1 products found
JPY: 267,000
USD: 1,661.27
-
［Out of stock］Gossen Metrawatt METRAHIT PM PRIME BT Handheld Digital Multimeter, 10A ac 600V ac 10A dc 600V dc M248B
KS17-2 cable set, AA batteries, condensed operating instructions in English and German, CD-ROM with operating instructions in multiple languages, DAkks calibration certificate and a protective rubber holster. METRAHIT ULTRA Precision TRMS Multimeter with Remote Control via Bluetooth. The METRAHIT ULTRA M248B is a precision high resolution TRMS system digital multimeter with remote control capability via a Bluetooth interface. The M248B also includes temperature measurement and data logging for demanding, universal applications in the laboratory or out in the field on service calls. Technical Details. Triple display with a resolution of ±310,000 digits. Intrinsic error: ± (0.02% rdg. + 20 digits). Measuring functions: 1 μV to 600 VDC and 10 μV to 600 VAC/AC+DC TRMS (bandwidth: 15 Hz to 100 kHz); 1 nA to 10 ADC and 10 nA to 10 AAC/AC+DC TRMS (bandwidth: 15 Hz to 10 kHz). Resistance, frequency, capacitance and temperature measurement: 1 mΩ to 30 MΩ, 0.001 Hz to 1 MHz, 1 pF to 3 mF; °C/°F Pt100, Pt1000, type K thermocouple: -270 to +1372 ºC. Automatic range selection and battery cutoff. Min-Max measured value storage. Integrated 2 MByte measurement data memory for approx. 300,000 measured values, sampling rate: 100 ms to 9 hrs. CAT IV @ 300 V or CAT III @ 600 V per IEC 61010-1. DAkkS calibration certificate as standard feature. Applications. Instruments included in the Gossen high-resolution series are extremely rugged, reliable digital multimeters with housings made of impact resistant ABS. With a resolution of 310,000 digits and roughly 30 different measuring functions, they ‘ve been developed for professional use. Features. RMS value with distorted waveform. Activatable filter for V AC measurement. Automatic / manual measuring range selection. Three Connector Jacks with Automatic Blocking Sockets (ABS). Overload protection. Measurement with Current Clamp Transformers and Sensors. Fast acoustic continuity test. Automatic storage of measured values. Storage of min-max values. Memory mode operation. Battery charging status - power saving circuit. Protective cover for harsh conditions. Data interfaces
1 products found
JPY: 285,000
USD: 1,773.27
-
［Out of stock］Gossen Metrawatt M246B Handheld Digital Multimeter, 10A ac 1000V ac 10A dc 1000V dc M246B
1 Protective rubber cover 1 Pair of safety measurement cables with 4 mm test probes, 1000 V CAT II, 600 V CAT III (KS17-2) 1 Condensed operating instructions, English/German 1 Operating instructions in English and German (CD ROM) 1 DAkkS calibration certificate 2 Batteries, 1.5 V, type AA, installed 1 COIL TEST ADAPTER for interturn short-circuit measurement (only in combination with METRAHIT COIL). 3. METRAHIT ISO 30000 Digit TRMS Multimeter with Insulation Measurement for Service Technicians. The METRAHIT.ISO multimeter is a rugged portable measuring instrument for use in the field. It is suitable for servicing household appliance, machines (e.g. forklifts) and systems (e.g. photovoltaic). Features and Benefits. Insulation resistance measurement up to 3.1 GΩ with interference voltage detection - test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V. Multimeter with diverse functions (V, Ω, F, Hz). TRMS measurements: TRMS AC / AC+DC for current / voltage up to 10 kHz. Activatable low-pass filter, 1 kHz / -3 dB in the V AC range. Direct current measurement, 100 nA to 10 A. Current measurement with current sensor clamps - CLIP. A transformation ratio of 1 mV:1 mA to 1 mV:1 A can be selected and is taken into consideration at the display. Precision temperature indicator, °C or °F, for Pt100 / Pt1000 sensors and type K thermocouples. Diode measurement (IK : 1 mA, Uflow to 5.1 V) and continuity testing. Display: 4 place, ±30,000 digits, illumination can be activated. Acoustic signals for: continuity testing, dangerous contact voltages, exceeded overload limits. Min-Max value storage. Data memory and internal clock, power pack adapter socket. IP 54 Housing protection, dust and splash protected, protective cover. Bidirectional infrared interface for exchanging data with a PC. Windows software available as an accessory for processing and graphic display of measured values via RS 232 interface
1 products found
JPY: 272,000
USD: 1,692.38
-
［Out of stock］Gossen Metrawatt METRAOHM 413 9V Ohm Meter, Maximum Resistance Measurement 1999 kΩ, Resistance Measurement Resolution M630A
METRAOHM 413, pluggable measurement lead, battery, operating instructions. Low-resistance measuring device METRAOHM 413. Overvoltage protection Signalling of external voltage: by LED, acoustic, measurement value Protection rating IP 65 Zero calibration of test leads Measurement range: 0.01 → 200 Ω. Digital low-resistance measuring device compliant with DIN VDE 0413 Part 4 and EN 61 557 Parts 1 and 4.
1 products found
JPY: 135,000
USD: 839.97
-
［Out of stock］Gossen Metrawatt METRAmax 2 Analogue Multimeter 3A ac/dc 300V M102A
Multimeter, battery, operating instructions. Analogue Multimeter METRAmax 2. Outstanding overload capacity — ideal for teaching and training Zero scale mark can be set at centre or on left Automatic battery switch-off. Voltage measurements from 0 → 100 / 300 mV / 1 VDC; 0 → 3 / 10 / 30 / 100 / 300 VAC / DC Current measurement 0 → 100 μA / 1 / 10 / 100 mA / 1 / 3 A AC / DC Left / centre zero point Accuracy: Class 2 DC; 3 AC Dimensions: 100 x 140 x 35 mm; weight: approx. 0.3 kg including battery
1 products found
JPY: 71,400
USD: 444.25
-
［Discontinued］Gossen Metrawatt METRAHIT AM PRO Handheld Digital Multimeter, 10A ac 1000V ac 10A dc 1000V dc M242A
METRAHIT BASE PRO TECH. MetraHit digital multimeters are suitable for universal with various applications. An excellent multimeter for using in the field as it is equipped an internal and mains-independent power supply. Automatic shut-down takes place when any measured values remain unchanged for any given period between 10 and 59 minutes, saving battery power. Your multimeter is protected from the elements and impact damage by the soft rubber cover that has a tilt stand and test probe holder. Features and Benefits:. Large light blue illuminated display with extra-large figures (15 mm) and bargraph display 12 multimeter functions Effective value measurement (AC, AC+DC) Automatic reading range selection Current measuring via external current sensors MIN / MAX / data hold storage Diode test and continuity test Automatic jack disable (ABS) - prevents incorrect connection of measuring leads One single jack prevents current ranges being interchanged Safety: CAT IV 600V, CAT III 1000 V. Additional " PRO " features. 16 multimeter functions Current measurement up to 10 A AC / DC directly possible Low pass filter ( 1kHz). Additional " TECH " features. 20 multimeter functions Current measurement up to 10 A AC / DC directly possible Low pass filter ( 1kHz) Capacitance. Applications:. Electrical engineering. Electrical installation. Laboratory applications. Telecommunications. Training. Many other applications. What Is Included:. Multimeter. Pair of safety measurement cables 1.2 m. 4 mm test probes CAT III, 600 V CAT IV (KS17-2). 2 Batteries 1.5 V Type AA. Operating instructions English/German. CD Rom, Content operating instructions English/German. DAkkS Calibration certificate
1 products found
JPY: 136,000
USD: 846.19
-
［Discontinued］Gossen Metrawatt Z104C Rubber Cover & Carrying Strap Metrahit Z104C
Accessories for METRA HIT multimeter
1 products found
JPY: 12,100
USD: 75.29
-
［Out of stock］Gossen Metrawatt METRAHit 2+ Handheld Digital Multimeter, 15A ac 600V ac 10A dc 600V dc M205A
IEC 61010-1/EN 61010-1/VDE 0411-1, EN 60529 VDE 0470, Part 1, IEC 61326/EN 61 236. METRAHIT / 2+ Multimeter. Features and Benefits:. Digital multimeter with bar chart display Real-time testing (AC) Automatic and manual measuring range selection Display of negative values on the analogue scale DATA HOLD, MIN/MAX memory Diode and continuity testing Power saving circuit (AUTO OFF) after 10 min. Automatic jack disable (ABS) - prevents incorrect connection of measuring leads Safety: CAT III 600V. IP 40 protection. Features Summary:. Automatic blocking sockets (ABS). Automatic / Manual measuring range selection. Display of negative values at the analogue scale. Storage of measured values. Continuity test. Power saving circuit. RMS Measurement with distorted waveshapes. Used in all areas of electrical engineering. LCD Panel. Size 65 mm x 30 mm. Analogue and digital display. Includes unit of measure, type of current, other special functions. Background illumation On/OFF key. ANALOGUE:. LCD scale with pointer. Scale length 55 mm in all ranges. Scalling 0 to ±60 with scale divisions in all ranges. Polarity display with automatic switching. Overflow display - Triangle. Measuring rate of 20 measurements per second. Digital:. Display / Chart height 7 segment characters 15 mm. Number of places - 3 6/7 place - 6000 steps. Measuring rate 2 measurements per second. What Is Included:. TRMS Digital multimeter. Protective rubber holster. 2 x 1.5 V AA batteries. 1 Set of measurement cables KS17-ONE. DAkkS Calibration certificate. Short form operating instructions
1 products found
JPY: 73,900
USD: 459.81
-
［Out of stock］Gossen Metrawatt METRAHit ENERGY Handheld Digital Multimeter, 10A ac 600V ac 10A dc 600V dc M249A
IEC/ EN 61010-1 VDE 0411-1, DIN EN 61326-1, VDE 0843-20-1, DIN EN 60529, DIN EN 60529, DIN VDE 0471, Part 1. METRAHIT ENERGY TRMS Multimeter. METRAHIT ENERGY multimeter is exceeding all previous performance limits and developed for professionals. Simultaneous TRMS current and voltage measurement with a resolution of 60000 digits and more than 35 different measuring functions. All the important power qualities can be precisely acquired. A rugged and reliable multimeter with a housing made from impact resistant ABS. Features and Benefits:. TRMS measurement (AC, AC+DC) Power measurement (W, VAr, VA, PF): active, reactive and apparent power with extreme values, power factor Energy measurement (Wh, VArh, VAh), active, reactive and apparent energy, mean power value with adjustable observation period and maximum value Mains quality analysis: recording of over and undervoltage, dips, swells, voltage peaks and transients in 0, 50 and 60 Hz systems Harmonic analysis: RMS values and distortion components up to the 15th harmonic at 16.7, 50, 60 and 400 Hz Special measuring functions: crest factor CF, conductivity nS, low resistance, duty cycle %, cable length km Resolution of 60,000 digits, triple display, display illumination Large data memory for up to 300,000 measured values Instrument is completely remote controllable. Features Summary:. Power and energy measurement. Systematic voltage quantity analysis. Harmonic analysis. Convenient triple display. Automatic / manual measuring range. User safety and overload protection. Peak value monitoring. Measurement with current transformer clamps and sensors. Three connector jacks with (ABS). Automatic storage of measured values. RMS Value with distorted waveshape. Storage of minimum and maximum values. Activatable filter for V AC measurement. Memory mode operation. Measuring of 5 V square wave signals. Fast acoustic contnuity test. What is Included:. Multimeter. 3 x Safety measurement cables KS29 with 4 mm test probes. 1000 V CAT III, 600 V CAT IV. 2 x Batteries 1.5 V AA. Condensed operating instruction English/German. CD ROM with operating instructions English/German. DAkkS Calibration certificate. Rubber holster
1 products found
JPY: 329,000
USD: 2,047.04
-
［Discontinued］Gossen Metrawatt DUSPOL analog 1000 Voltage Indicator CAT III 1000 V, CAT IV 600 V M611D
EN 61326 Part 1, CAT IV 600 V / CAT III 1000 V. DUSPOL analog 1000 Voltage Tester. The DUSPOL analog 1000 voltage tester is rated for DC and AC voltage tests in a voltage range from 12 V to 1000 V. With DC voltage, it is possible to perform polarity tests and with AC voltage, it is also possible to perform phase tests with these instruments The DUSPOL analog 1000 voltage tester shows the phase sequence of a 3-phase current system, provided the neutral point is grounded Voltage testing Phase sequence test Phase testing Polarity check Cable fracture detector Load connection via vibration motor Vibrating alert: the integrated motor with unbalance signals activity during load testing by generating vibrations in the tester handle Rugged housing design with rubberized handle surface Protection class: IP 65 No batteries necessary
1 products found
JPY: 17,500
USD: 108.89
-
［Discontinued］Gossen Metrawatt DUSPOL digital 1000 Voltage Indicator Continuity Check CAT III 1000 V, CAT IV 600 V M611F
EN 61326 Part 1, CAT IV 600 V / CAT III 1000 V. DUSPOL digital 1000 Voltage Tester. The DUSPOL digital 1000 voltage tester is rated for DC and AC voltage tests in a voltage range from 12 V to 1000 V. With DC voltage, it is possible to perform polarity tests and with AC voltage, it is also possible to perform phase tests with these instruments The DUSPOL digital 1000 voltage tester shows the phase sequence of a 3-phase current system, provided the neutral point is grounded Voltage testing Phase sequence test Phase testing Polarity check Cable fracture detector Continuity test Resistance measurement Diode test Frequency measurement Load connection via vibration motor Vibrating alert: the integrated motor with unbalance signals activity during load testing by generating vibrations in the tester handle Illumination of measuring points Rugged housing design with rubberized handle surface Protection class: IP 65 Power supply: 2 x 1.5 V LR03 / AAA
1 products found
JPY: 31,400
USD: 195.37
-
［Discontinued］Gossen Metrawatt SECUTEST PRO PAT Tester, Electrical, Medical, Welding Test Type M7050-V003
Mains power cable, test probe 2m (not coiled), USB cable (USB A to USB B) 1.5m, plug-on alligator clip, condensed operating instructions, ETC report software available on the Internet.. SECUTEST PRO Tester. SECUTEST PRO Tester for testing electrical devices, medical devices and welding units with Test Sequences per VDE 0701-0702, IEC 62353 and IEC 60974-4.. 8 preconfigured test sequences for quickly testing simple operating equipment One universal, adjustable test sequence One test sequence executed with individual measurements User-defined test sequences Revolutionary data maintenance and storage concept for automated test sequences and Individual measurements for up to 50,000 data records Pioneering operating concept with double rotary switch, direct selection keys and softkeys High-resolution, brilliant 4.3" TFT color display Unique multiple measurement allows convenient recording of several measuring points Automatic DUT connection and protection class detection Compact, impact resistant housing with integrated rubber protector Comprehensive, legally secure preparation of test reports Modern interfaces: for data entry (two USB A) and data exchange (one USB B) Extensive setting options for international use (language, keyboard, character set, date, time)
1 products found
JPY: 464,000
USD: 2,887.01
-
［Discontinued］Gossen Metrawatt METRAMAX 12 Digital Multimeter 10A 600V M212A
Multimeter cable set KS14, operating instructions, protective case with tilt stand. Analogue Digital Multimeter METRAmax 12. Particularly flat design (25 mm deep) Automatic/manual measurement range selection Acoustic overload warning Hold/Min/Max as well as diode and continuity testing Switchable input resistance for voltage measurement Protective case for rough working conditions
1 products found
JPY: 38,200
USD: 237.68
-
［Discontinued］Gossen Metrawatt GTM3033000R0001 Power Meter, Model MAVOWATT 4, Absolute Maximum Power Measurement 25kW GTM3033000R0001
Power Meter Mavowatt 4. Direct power measurement for direct current and active power measurements for single-phase AC current and balanced three-phase rotating current Reactive power detection Also measures mesh voltage(s) Ideal device for workshop, service and installation work Rotary field direction display cosf measurement
1 products found
JPY: 187,000
USD: 1,163.51
-
［Out of stock］Gossen Metrawatt METRAHIT AM XTRA Handheld Digital Multimeter, 10A ac 1000V ac 10A dc 1000V dc M240A
CAT IV 600 V, CAT III 1000 V. METRAHIT X-TRA Multimeter. MetraHit X-tra digital multimeters are suitable for universal with various applications. An excellent multimeter for using in the field as it is equipped an internal and mains-independent power supply. Automatic shut-down takes place when any measured values remain unchanged for any given period between 10 and 59 minutes, saving battery power. Your multimeter is protected from the elements and impact damage by the soft rubber cover that has a tilt stand and test probe holder. Features and Benefits:. Large light blue illuminated display with extra-large figures (15 mm) and bargraph display 23 multimeter functions Effective value measurement (AC, AC+DC) Automatic reading range selection MIN / MAX memory 540 KB memory for approx. 15,400 measured values Infrared interface for data transmission (only with USB X-TRA adapter and software) Diode test and continuity test Power supply connection for battery-free use Automatic jack disable (ABS) - prevents incorrect connection of measuring leads One single jack prevents current ranges being interchanged Safety: CAT IV 600V, CAT III 1000 V. Applications:. Electrical engineering. Electrical installation. Laboratory applications. Telecommunications. Training. Many other applications. What Is Included:. Multimeter. Pair of safety measurement cables 1.5 m. 4 mm test probes CAT III, 600 V CAT IV (KS17-2). 2 Batteries 1.5 V Type AA. Operating instructions English/German. CD Rom, Content operating instructions English/German. DAkkS Calibration certificate. Protective rubber cover
1 products found
JPY: 190,000
USD: 1,182.18
-
［Discontinued］Gossen Metrawatt METRAHIT AM BASE Handheld Digital Multimeter, 10A ac 1000V ac 10A dc 1000V dc M241A
Multimeter, KS17 test lead set, batteries, DKD calibration certificate, instructions. METRA HIT 30M Multimeter. Precision multimeter with data recorder and thermometer for extreme conditions Automatic range selection Real-time testing (AC) Digital filter for interference compensation Measures resistance and temperature with Kelvin adapter MIN / MAX memory 128 kB built-in measurement data memory Continuity testing IR data interface Protection classes: CAT III 300 V, CAT II 600 V
1 products found
JPY: 113,000
USD: 703.09
-
［Out of stock］Gossen Metrawatt METRACAL MC Multi Function Calibrator M245A
KS29 cable set, abbreviated instructions, CD ROM with operating instructions, GH-XTRA rubber holster, DKD calibration certificate. Warranty is 3 years material and workmanship, 1 year for calibration. METRAHIT MULTICAL Multimeter, Calibrator. This new, compact multifunction process calibrator is robust, simple to handle and of the highest functionality, precision and PC system ability. It rationalizes measuring, calibrating and revision work in the chemical process, laboratory and development fields, in the production area of electronic measured transducers and at comparison and calibration of metrological components. Universal calibrator, simulator and multimeter mA / mV.. V / °C (Pt100/1000, Ni100/1000, thermocouples: J, L, T, U, K, E, S, R, B, N) / 30 .. 2000 Ω Dual mode ¡V simultaneous calibration and measurement (U / I) Measuring and encoding in absolute terms and as percentage (scaled) Memory for measurement results: 16 MBit Frequency and pulse run generators: 1 Hz to 2 kHz Ramp and staircase functions METRAwin μ90-2 interface and calibration software Transmitter simulator (sink: 0.. 24 mA) Rugged, EMC compliant design Precision multimeter (V, A, Ω, F, Hz, °C / F) 30,000 (60,000) digits and triple display TRMS AC measurement to 1 kHz Protection rating IP65
1 products found
JPY: 619,000
USD: 3,851.42
