Calibrators
Filters
-
［Discontinued］Druck UNO-38023-3275 Current Loop Calibrator Over Boot, For Use With UPS III Loop Calibrator UNO-38023-3275
Druck Loop Calibrator - UPS III. Small but mighty, Druck's UPS III loop calibrator offers maximum results with a compact design. The calibrator forms part of an essential toolbox that one may need for calibration and troubleshooting, instrument maintenance and valve set-up. Druck's loop calibrator offers a wealth of time-saving features, all made possible through the advanced microprocessor-based electronics and large menu-driven graphics display. Features ; Benefits. HART compatible with internal loop resistor Weighing just 275g (9.7 oz), and it's dimensional measurements are L129 x W77 x D24 mm - fitting comfortably in a shirt pocket Rugged, hardwearing and compact design The graphic display with a menu-driven interface has been designed to be super user-friendly The internal 0 to 24 V (volts) loop supply is available in both measure and source modes, this is essential during plant shutdowns Step, span check and value check can be easily carried out through linearity tests and zero/span adjustments The calibrator offers single-handed loop testing, valve set-up and slow rate checks through adjustable rates (1-599 secs) The continuity and switch test facility reduce DMM dependence when fault finding, checking loop integrity and testing switches Adjustable display contrast and resolution Battery voltage and low battery indicator The primary reading is shown in mA (milliamp) or %, as linear or square root (flow) Auto switch off can be enabled or disabled, when the auto power down is enabled it will power down 30 minutes ager the last key was pressed The measurement generation of 0 - 24mA DC Predefined values for quick testing of linear loops, flow loops and the control of valves Has an operating temperature of 14°F to 122°F (-10°C to 50°C) The power supply of this loop calibrator is through 4 x 1.5 V (volts) AA size alkaline batteries Electrical terminals are gold plated, 4 mm sockets. Looking for some accessories?. A universal mains input adapter as an alternative power for the UPS III – ; 434-7038 434-7038 Carry case – ; 434-7022 434-7022 Protective nitrile rubber over-boot, ensuring an extra layer of protection for the device – ; 434-7016 434-7016. What's included with the kit?. A handy user manual Set of cables/wires Batteries - 4 x 1.5 V AA alkaline Calibration certificate as standard
1 products found
JPY: 8,420
USD: 52.39
-
［Discontinued］Druck UNO-38016-3275 Current Loop Calibrator Case, For Use With UPS III Loop Calibrator UNO-38016-3275
Druck Loop Calibrator - UPS III. Small but mighty, Druck's UPS III loop calibrator offers maximum results with a compact design. The calibrator forms part of an essential toolbox that one may need for calibration and troubleshooting, instrument maintenance and valve set-up. Druck's loop calibrator offers a wealth of time-saving features, all made possible through the advanced microprocessor-based electronics and large menu-driven graphics display. Features ; Benefits. HART compatible with internal loop resistor Weighing just 275g (9.7 oz), and it's dimensional measurements are L129 x W77 x D24 mm - fitting comfortably in a shirt pocket Rugged, hardwearing and compact design The graphic display with a menu-driven interface has been designed to be super user-friendly The internal 0 to 24 V (volts) loop supply is available in both measure and source modes, this is essential during plant shutdowns Step, span check and value check can be easily carried out through linearity tests and zero/span adjustments The calibrator offers single-handed loop testing, valve set-up and slow rate checks through adjustable rates (1-599 secs) The continuity and switch test facility reduce DMM dependence when fault finding, checking loop integrity and testing switches Adjustable display contrast and resolution Battery voltage and low battery indicator The primary reading is shown in mA (milliamp) or %, as linear or square root (flow) Auto switch off can be enabled or disabled, when the auto power down is enabled it will power down 30 minutes ager the last key was pressed The measurement generation of 0 - 24mA DC Predefined values for quick testing of linear loops, flow loops and the control of valves Has an operating temperature of 14°F to 122°F (-10°C to 50°C) The power supply of this loop calibrator is through 4 x 1.5 V (volts) AA size alkaline batteries Electrical terminals are gold plated, 4 mm sockets. Looking for some accessories?. A universal mains input adapter as an alternative power for the UPS III – ; 434-7038 434-7038 Carry case – ; 434-7022 434-7022 Protective nitrile rubber over-boot, ensuring an extra layer of protection for the device – ; 434-7016 434-7016. What's included with the kit?. A handy user manual Set of cables/wires Batteries - 4 x 1.5 V AA alkaline Calibration certificate as standard
1 products found
JPY: 8,250
USD: 51.33
-
［Discontinued］Druck 191-129-3275 Current Loop Calibrator Adapter, For Use With UPS III Loop Calibrator 191-129-3275
Druck Loop Calibrator - UPS III. Small but mighty, Druck's UPS III loop calibrator offers maximum results with a compact design. The calibrator forms part of an essential toolbox that one may need for calibration and troubleshooting, instrument maintenance and valve set-up. Druck's loop calibrator offers a wealth of time-saving features, all made possible through the advanced microprocessor-based electronics and large menu-driven graphics display. Features ; Benefits. HART compatible with internal loop resistor Weighing just 275g (9.7 oz), and it's dimensional measurements are L129 x W77 x D24 mm - fitting comfortably in a shirt pocket Rugged, hardwearing and compact design The graphic display with a menu-driven interface has been designed to be super user-friendly The internal 0 to 24 V (volts) loop supply is available in both measure and source modes, this is essential during plant shutdowns Step, span check and value check can be easily carried out through linearity tests and zero/span adjustments The calibrator offers single-handed loop testing, valve set-up and slow rate checks through adjustable rates (1-599 secs) The continuity and switch test facility reduce DMM dependence when fault finding, checking loop integrity and testing switches Adjustable display contrast and resolution Battery voltage and low battery indicator The primary reading is shown in mA (milliamp) or %, as linear or square root (flow) Auto switch off can be enabled or disabled, when the auto power down is enabled it will power down 30 minutes ager the last key was pressed The measurement generation of 0 - 24mA DC Predefined values for quick testing of linear loops, flow loops and the control of valves Has an operating temperature of 14°F to 122°F (-10°C to 50°C) The power supply of this loop calibrator is through 4 x 1.5 V (volts) AA size alkaline batteries Electrical terminals are gold plated, 4 mm sockets. Looking for some accessories?. A universal mains input adapter as an alternative power for the UPS III – ; 434-7038 434-7038 Carry case – ; 434-7022 434-7022 Protective nitrile rubber over-boot, ensuring an extra layer of protection for the device – ; 434-7016 434-7016. What's included with the kit?. A handy user manual Set of cables/wires Batteries - 4 x 1.5 V AA alkaline Calibration certificate as standard
1 products found
JPY: 15,440
USD: 96.07
-
［Out of stock］Druck IPM620-IS-11G Pressure Module, For Use With DPI 620 Series IPM620-IS-11G
Druck Pressure Modules. Druck's pressure modules are interchangeable and require no setup or calibration, they represent the latest development within digital output sensor technology. They feature a multitude of key innovations, which allow pressure re-ranging of compatible equipment. The simple screw fit makes the pressure and the electrical connections with ease and without the need for any tools. Druck's pressure modules can be used in in a number of applications, mainly in conjunction with Druck's pneumatic and hydraulic pressure stations and Druck's multifunction calibrators - forming an integrated pressure calibrator for test and calibration of pressure instruments such as transmitters, transducers, switches, gauges, indicators and recorders. Druck's pressure modules can also be combined with the Druck ‘s module carriers, which adds a dual-channel pressure management capability that can be re-arranged within seconds. Features ; Benefits. The digital characterization allows for interchangeability without set-up or calibration Fully interchangeable Gauge or absolute pressure available Screw fit for accuracy and simplicity Depending on which pressure module you choose from our offer, there is a pressure range between -14.5 to 15,000 psi Accuracy from 0.025%. Did you know?. The "IS" in the name or MPN of a pressure module stands for "intrinsically safe", if an item is intrinsically safe it means that it is incapable of releasing sufficient electrical and thermal energy under normal or abnormal conditions. This results in the item not being able to cause ignition of a specific hazardous atmospheric mixture in its most easily ignited concentration. If the pressure module you are purchasing is intrinsically safe, please note that it will only be compatible with other Druck intrinsically safe products. Druck's intrinsically safe pressure modules are ATEX and IEC approved.
1 products found
JPY: 695,000
USD: 4,324.29
-
［Out of stock］Time Electronic 1017 Multi Function Calibrator 1017
internal rechargeable Ni-Cad battery pack. Time Electronics Model 1017 DC Multifunction Voltage/Current/Resistance Calibrator. Time Electronics 1017 is a high performance portable multifunction calibrator with voltage, current and resistance ranges. Its combination of precision and simple operation gives it versatility for workshop and field operations. The batteries are automatically recharged when the mains supply is connected. The compact, durable plastic case, with tilt stand/carry handle, takes up minimal bench space and makes the 1017 readily transportable. The instrument's outstanding stability v temperature and time performance is because of the use of special computer-selected reference diodes and resistor technology. The low-thermal emf terminals reduce errors when working with microvolt signals. Digital deviation control allows the output to be increased and decreased in % terms from 0 to ±0.999%. This provides a direct readout of error and simplifies the recording results for calibration certificates. It enables the user to see immediately whether the unit under test is within specification. The 1017 is suitable for calibrating and simulating a wide range of instruments including thermocouples, transducers, 4 - 20 mA and 0 - 10 V transmitters and platinum resistance thermometers. DC voltage 10nV to 100V DC current 100nA to 100mA Resistance 10MΩ to 10kΩ Accuracy 0.0005% (50 ppm) 1 ppm setting resolution Noise <2 ppm (0.1 to 1Hz) Stability <5 ppm/day, <25 ppm/year Deviation control - voltage and current Battery or mains operation Dimensions 290 x 250 x 110 mm Weight 2.4kg
1 products found
JPY: 518,000
USD: 3,223.00
-
［Out of stock］Time Electronic 1024 Current & Voltage Calibrator 0 → 100 mA 1024
Time Electronics Model 1024 DC Current Calibrator with Null Measuring Facility. Time Electronics 1024 is a readily portable solid state battery-powered calibrator suitable for laboratory, field or industrial use. It incorporates Time Electronics' well-proven circuit techniques. Additionally, the null balance system enables the 1024 to be used for making accurate current measurement. Operation is by backing the current source output against the current to be measured, with the difference being displayed on a sensitive centre zone null meter. At the null point, there is no voltage drop across the 1024. Applications include calibration and testing of current-sensitive transducers, calibration and linearity tests (on digital and electronic current meters) and semiconductor parameter measurements (such as diode conduction voltages at specified current levels). Simply plugging the 1024 into a mains supply will charge its batteries - a front panel indicator serves as a supply on/off display and monitors the battery supply condition. Up to 100mA output 0.02% accuracy 10 ppm/hr stability Null facility Portable Dimensions 220(L) x 160(H) x 200(D) mm Weight 3.3kg Battery and mains operation
1 products found
JPY: 489,000
USD: 3,042.56
-
［Out of stock］Gossen Metrawatt METRACAL MC Multi Function Calibrator M245A
KS29 cable set, abbreviated instructions, CD ROM with operating instructions, GH-XTRA rubber holster, DKD calibration certificate. Warranty is 3 years material and workmanship, 1 year for calibration. METRAHIT MULTICAL Multimeter, Calibrator. This new, compact multifunction process calibrator is robust, simple to handle and of the highest functionality, precision and PC system ability. It rationalizes measuring, calibrating and revision work in the chemical process, laboratory and development fields, in the production area of electronic measured transducers and at comparison and calibration of metrological components. Universal calibrator, simulator and multimeter mA / mV.. V / °C (Pt100/1000, Ni100/1000, thermocouples: J, L, T, U, K, E, S, R, B, N) / 30 .. 2000 Ω Dual mode ¡V simultaneous calibration and measurement (U / I) Measuring and encoding in absolute terms and as percentage (scaled) Memory for measurement results: 16 MBit Frequency and pulse run generators: 1 Hz to 2 kHz Ramp and staircase functions METRAwin μ90-2 interface and calibration software Transmitter simulator (sink: 0.. 24 mA) Rugged, EMC compliant design Precision multimeter (V, A, Ω, F, Hz, °C / F) 30,000 (60,000) digits and triple display TRMS AC measurement to 1 kHz Protection rating IP65
1 products found
JPY: 619,000
USD: 3,851.42
