SHIN-EI SANGYO CO., LTD.

Oil-Splitting Detergent Class One Sea (Neutral Type) 4L

HOZAN TOOL INDUSTRIAL CO., LTD.

Đại tu sạch hơn, làm sạch nguồn cung cấp　Z-294

Parts cleaner for a wide range of oily grease stains to water-soluble mud stains

TRUSCO NAKAYAMA CORPORATION

Α Cleaner, Làm Sạch Nguồn Cung Cấp 4L

FINE CHEMICAL JAPAN Co., Ltd.

Siêu sạch 420ml　FC211-S

A versatile cleaning spray. It easily removes fats, oils, vegetable oils, metal powders and other stains on metal surfaces.
Cleaning of oil stains from industrial machinery, textile machinery, gravure printing machines to plastics.

TRUSCO NAKAYAMA CORPORATION

Phun cho vòi phun dài 300mm

DAIZO CORPORATION

NIC khuôn làm sạch đại lý phun 480ml　4004340

Strongly clean oils and fats attached to the mold.
Quick-drying type allows you to perform the following tasks immediately after cleaning.

Sumico Lubricant Co., Ltd.

Phun (chất làm sạch khuôn) Máy làm sạch khuôn Sumi, vật tư làm sạch 420ml　SMD-CL

This cleaning agent uses a non-chlorine solvent as the main agent to clean fats, oils, waxes and other dirt.
Cleaning the injection molding machine mold. (It is more effective if you clean it while wiping with a wet cloth.)

FINE CHEMICAL JAPAN Co., Ltd.

Chất tẩy rửa khuôn, Dụng cụ làm sạch FD 3 420ml　FC-212

You can dissolve and easily remove the seizure products that adhere to the mold.
Can be easily cleaned in a short time without scratching the mold.

DAIZO CORPORATION

Bình xịt khí NIC 480ml　4004440

Powerfully dissolves and removes all kinds of resin gas and tar.
Since it has excellent melting and cleaning power, it suppresses unevenness on the surface of molded products.

Sumico Lubricant Co., Ltd.

Phun (loại bỏ khí tar chết Chất làm sạch) Sumi Khuôn DR 420ml　SMD-DR

It is a gas film remover for resin molding dies and has excellent performance in dissolving chemically changed resin.
To remove gas dust and stubborn oil dirt stuck to an injection molding machine mold.

COSMOBEAUTY Co., Ltd.

Phụ tùng & Máy làm sạch phanh S (550ml)　10468

Provides excellent cleaning power against oil, grease, and other dirt on brake linings and brake drums.
It does not contain chlorofluorocarbons or trichloroethane, which can destroy the ozone layer and cause environmental pollution.

COSMOBEAUTY Co., Ltd.

Phụ tùng & Chất tẩy rửa phanh (840ml)　13400

Quick-dry type.
Can can be used upside down.

KURE Engineering Ltd. (KURE)

Sạch hơn, Thiết bị làm sạch cab 420ml　NO1014

Clean up the carburetor interior to bring out the original engine performance.
Strongly cleans dirt adhering to metal parts.

KURE Engineering Ltd. (KURE)

Rektora sạch 380ML　NO1012

It strongly washes oil, grease, wax, pitch, etc.
Jet to remove dirt quickly.

KURE Engineering Ltd. (KURE)

Điều hòa động cơ 380ML　NO1013

By removing carbon, varnish, gum, sludge, and other dirt deposited in the intake system and combustion chamber, the system can restore engine performance, improve acceleration performance, clean exhaust gases, and facilitate engine rotation.
You can also spray the can upside down.

TRUSCO NAKAYAMA CORPORATION

Chất tẩy rửa bằng thép không gỉ, vật tư làm sạch 420ml　TC-SC420

All you have to do is to melt the oil stains and stubborn stains by wrapping them with mousse bubbles and wipe them off.
Sash and metal parts are less prone to rust.

TASETO Co., Ltd.

Sạch hơn, làm sạch Nguồn cung cấp W2 loại 450　TCW2450

This water-based detergent contains a perfect balance of gentle surfactants and alkalinity.
It has an excellent effect on hand stains, cigarette stains and oil stains.

TASETO Co., Ltd.

Dầu sạch hơn, làm sạch vật tư Q1 loại 550　OCQ1550

It has a powerful degreasing effect.
It does not fall under the Organic Solvent Poisoning Prevention Regulations.

Sumico Lubricant Co., Ltd.

Xịt (chất tẩy rửa khử mùi) Sumi Clean Spray 420ml　SMC

High pressure injection type strong degreasing cleaning spray using non-chlorine solvent as main agent.
Degreasing and cleaning of machine parts, etc.

Sumico Lubricant Co., Ltd.

Sumi sạch S-800 4L

DAIZO CORPORATION

Chất làm sạch Accordion 250ml

ThreeBond Co., Ltd.

Thiết bị điện tử sạch hơn, làm sạch nguồn cung cấp gấu trúc 29 d 420ml không CFC　TB29D

Removes stains related to electrical equipment without damaging plastic, rubber, metal, paint, etc.
It is not subject to the Organic Solvent Poisoning Prevention Regulations.

Devcon

Thiết bị làm sạch điện tử miễn phí CFC, vật tư làm sạch 459ml　L03116

Non-CFC cleaner.
It penetrates quickly without leaving any residue on the surface and evaporates rapidly.

Shin-Etsu Chemical Co., Ltd.

Chất chống tạo bọt loại rắn 200g　KM601S-200

Solid antifoam.
It has excellent storage stability, and the defoaming component gradually elutes just by installing it in aqueous foaming solution, and the defoaming effect lasts for a long time.

Shin-Etsu Chemical Co., Ltd.

Chất chống tạo bọt nhũ tương 1kg

Shin-Etsu Chemical Co., Ltd.

Chất chống ăn mòn nhũ tương 18kg

YOKOHAMA OILS & FATS INDUSTRY Co., Ltd.

Nhựa đường sạch 20L　CB16

After spraying undiluted solution, you can simply wash it off.
It easily removes asphalt that is firmly attached.

YOKOHAMA OILS & FATS INDUSTRY Co., Ltd.

Bê tông sạch 20L/BIB　CB20

Dissolves and removes thin concrete saws.
After applying the undiluted solution with a brush, after a while, wash it with a high-pressure washer and rub it with a metal brush scraper.

JEFCOM

Awa Cleaner　ACL-300

Dissolution agent exclusively for Newer foam (AW-500)

Sumico Lubricant Co., Ltd.

PRO353 cab Cleaner, Vật tư làm sạch bọt 420ml　782836

A cleaning spray for carburetors only.
Removes sludge and other dirt accumulated inside the carburetor to facilitate the operation of the carburetor.

ESCO Company Ltd.

Phun (Đối với băng tải) 220mL　EA920BB-8

Can also be used upside down.

Sumico Lubricant Co., Ltd.

FD Cleaner, Thiết bị làm sạch 480ML　515448

Quick-drying type degreasing cleaning spray that does not affect resin easily.
Cleaning the injection molding machine mold.

Devcon

Máy làm sạch động cơ điện CORIUM 168, vật tư làm sạch　C0168A

A spray type cleaner that can be applied easily.
Eco-friendly and low odor.

Henkel Japan Ltd.

Dầu, mỡ, sáp cho chất làm sạch 18kg　C-NE A777SW

It is a neutral type that does not contain intangible components and can be used without damaging the material of the cleaning product.
It is an environment-friendly type that does not fall under PRTR or medical drama.

AZ Co., Ltd.

Bộ chế hòa khí sạch hơn 420mL　F211

It removes carbon, sludge and oil mist inside the carburetor with excellent cleaning power to facilitate operation.
Cleaning the carburetor.

AZ Co., Ltd.

Bộ chế hòa khí sạch hơn, làm sạch nguồn cung cấp mousse Loại 420mL　F212

Because it is a mousse type, it is ideal for stubborn stains that stick.
Cleaning the carburetor.

Sumico Lubricant Co., Ltd.

DRZ Mùa hè　565036

It is a detergent that removes stubborn stains such as gas and dust generated by chemical changes of resin during resin molding and adhering to the mold.
This product does not contain any chemical substances that fall under the PRTR Law.

Shin-Etsu Silicone

Emulsion-type defoaming agent 1kg　KM-72

It is a fast-acting product compliant with the Food Sanitation Law.

Shin-Etsu Silicone

Emulsion-type defoaming agent 1kg

Shin-Etsu Silicone

Silicone defoaming agent 1kg　KM-72F

It is a food sanitation law-compliant product with excellent durability.