KURE Engineering Ltd. (KURE)

Chất bôi trơn chống gỉ 5-56

KURE Engineering Ltd. (KURE)

Strong Repair Tape Gorilla Tape Black 48 mm x 9.1 m x Thickness 0.43 mm　NO1788

It is an all-weather type with excellent water resistance, and can be used in various places both indoors and outdoors.
Thick durable type with high strength polyester cloth, can be adhered to smooth, rough and uneven surfaces.

KURE Engineering Ltd. (KURE)

Hình　NO1176

This foam type surface finishing agent contains 0.7 micron fine particle compound and 3 WAX components.
It can be applied smoothly and evenly and has excellent workability.

KURE Engineering Ltd. (KURE)

3-36 430ml

KURE Engineering Ltd. (KURE)

Phòng chống gỉ dài hạn Phun 400ml　NO1426

The strong semi-hard coating provides long-term anti-rust effect.
The formed film follows the expansion and contraction of the metal and has the characteristic of being difficult to peel off.

KURE Engineering Ltd. (KURE)

Áo khoác con dấu 316ml　NO1018

It is an acrylic rust and gloss protector that forms a thin, colorless, transparent coating film to prevent corrosion and oxidation.
Clear, colorless acrylic rust and gloss protector that forms a thin coating on the surface to prevent corrosion and oxidation.

KURE Engineering Ltd. (KURE)

Loại bỏ lần cuối 420ml

KURE Engineering Ltd. (KURE)

Chất tẩy rửa rỉ sét, Thiết bị làm sạch 150 g　NO1042

Contains a special penetrating agent that quickly penetrates the rust, breaks it down, and removes it cleanly.
Contains a special penetrant that penetrates rust quickly.

KURE Engineering Ltd. (KURE)

Phun Silicon Lub 420ml　NO1420

Silicone coating improves gliding of metal, plastic, rubber, wood, paper, etc.
Excellent heat resistance, effective for mold release, shine release, and waterproofing.

KURE Engineering Ltd. (KURE)

5-563. 785L

KURE Engineering Ltd. (KURE)

5-56DX 420ml

KURE Engineering Ltd. (KURE)

Siêu 5-56 70ml　NO3026

It contains fluoroplastic (PTFE) and an extreme pressure agent to maximize the performance of moving parts, high temperature parts, extreme pressure parts and high load parts.
Special additives prevent rust generation for a long time by penetrating even the smallest holes and crevices on the metal surface to form a strong coating that blocks contact with moisture, salt and oxygen.

KURE Engineering Ltd. (KURE)

5-56 Không mùi 330ml　NO1048

By replacing water on the metal surface with strong penetration force and forming a thin film, it exhibits excellent lubrication and rust prevention.
Suitable for use in places that are sensitive to odors.

KURE Engineering Ltd. (KURE)

5-56 > loại Bút < 8ml　NO1104

Just by lightly applying it with the tip of a pen, it has four effects: lubrication, rust prevention, cleaning, and moisture prevention.
Since it is a pen type, there is no dripping or scattering, so you can easily use the pin point.

KURE Engineering Ltd. (KURE)

6-66 315ml　NO1054

Rust, moisture and lubricant for marine use to keep ships in the best condition.
Superior water displacement and strong removal of moisture and moisture adhering to metal surfaces.

KURE Engineering Ltd. (KURE)

Keo bôi trơn cao 420ml　NO1060

A highly adhesive lubricant spray that contains a water-resistant and heat-resistant lubricant and fluoropolymer.
It also has an anti-rust effect.

KURE Engineering Ltd. (KURE)

Siêu chuỗi Lub 180ml　NO1068

This is a premium performance chain exclusive lubricant with excellent water and abrasion resistance and long-term lubricating effect.
It does not scatter even when running after spraying.

KURE Engineering Ltd. (KURE)

Tác nhân trượt nhiều ứng dụng　NO1107

Since it is a solvent-free type, it improves the slipperiness of all kinds of materials such as plastic, wood and rubber besides metal.
Unscented silicone-based lubricant with little stickiness.

KURE Engineering Ltd. (KURE)

Dầu mỡ Mate 300ml　NO1058

A mist spray grease with excellent heat and water resistance that provides long-term lubrication and rust resistance.
It forms a strong coating to eliminate squeaking noise and poor lubrication.

KURE Engineering Ltd. (KURE)

Siêu mỡ Mate 300ml　NO1056

This mist spray grease has excellent heat resistance, pressure resistance and osmotic power, and has excellent baking and bite prevention effects.
Contains high purity molybdenum disulfide to maintain performance even under high load and temperature.

KURE Engineering Ltd. (KURE)

Mỡ Urea 430ml　NO1414

This is a long-life urea-based grease that forms a strong coating to prevent squeezing and poor lubrication.
Excellent mechanical stability, does not soften easily and does not spill or scatter.

KURE Engineering Ltd. (KURE)

Vành đai ngừng phun 70ml　NO1105

Just by spraying, the belt stops slipping and eliminates the squealing.
Removes dirt stuck to the rubber belt.

KURE Engineering Ltd. (KURE)

Van điện trở 300mL　NO1039

Excellent lubrication can be obtained by simply spraying.
Because it dries quickly, it doesn't get sticky and doesn't get dusty, so it doesn't stain the moving parts.

KURE Engineering Ltd. (KURE)

Silicone mỡ Mate dán 50g　NO1067

Contains fluoropolymer (PTFE) for long lasting powerful lubrication.
Can also be used for rubber and plastic.

KURE Engineering Ltd. (KURE)

BLADE sạch 3. 785L

KURE Engineering Ltd. (KURE)

Sạch hơn, Thiết bị làm sạch cab 420ml　NO1014

Clean up the carburetor interior to bring out the original engine performance.
Strongly cleans dirt adhering to metal parts.

KURE Engineering Ltd. (KURE)

Rektora sạch 380ML　NO1012

It strongly washes oil, grease, wax, pitch, etc.
Jet to remove dirt quickly.

KURE Engineering Ltd. (KURE)

Điều hòa động cơ 380ML　NO1013

By removing carbon, varnish, gum, sludge, and other dirt deposited in the intake system and combustion chamber, the system can restore engine performance, improve acceleration performance, clean exhaust gases, and facilitate engine rotation.
You can also spray the can upside down.

KURE Engineering Ltd. (KURE)

Liên hệ Reviving phun 220ml　NO1424

Restores contact points by removing carbon and dirt from the contact points.
The film formed on the contact prevents the contact from abrasion and corrosion, thereby preventing contact defects and stray currents.

KURE Engineering Ltd. (KURE)

Nhanh khô sạch hơn, làm sạch nguồn cung cấp 430ml　NO1419

Quickly removes dirt from printed circuit boards and sensors.
Can also be used for plastic parts.

KURE Engineering Ltd. (KURE)

2-26 430ml

KURE Engineering Ltd. (KURE)

Nhiệt kháng sơn Coat Bạc 300ml

KURE Engineering Ltd. (KURE)

Klepaulimit Rõ ràng 500ml

KURE Engineering Ltd. (KURE)

Dung dịch Klepaulimit DX 200ml　NO1253

The various functions of crepolimate have been upgraded to add cleaning and sterilization effects.
The special cleaning agent gets into every detail and removes dirt cleanly.

KURE Engineering Ltd. (KURE)

Nihostola màn hình tay sạch hơn, làm sạch nguồn cung cấp 235mL

KURE Engineering Ltd. (KURE)

Nước đá 420ml　NO2155

With the strong melting force and the strong injection force of carbon dioxide gas, it instantly melts ice and frost on the glass of a car.
Contains special ingredient SPR-GL to strongly prevent re-freezing of melted ice.

KURE Engineering Ltd. (KURE)

Trông 180ml　NO1184

This foam type surface finishing agent contains 0.7 micron fine particle compound and 3 WAX components.
It can be applied smoothly and evenly and has excellent workability.

KURE Engineering Ltd. (KURE)

Khoang động cơ trông 140ml　NO1185

This is a surface finishing agent for the engine compartment that removes dirt from the compartment and gives it a high quality shine.
It can be finished with a simple wiping operation and does not need to be washed with water.

KURE Engineering Ltd. (KURE)

Vành đai squeal Set & điều hòa　NO1425

Just spray it to eliminate the squeal of the rubber belt.
Prevents deterioration and hardening of rubber belts and improves durability.

KURE Engineering Ltd. (KURE)

5-56 2CÁCH 400ml　NO1501

A convenient 2-way spray that allows you to easily switch between injection methods.
Excellent performance in various applications such as rust prevention and lubrication of all metals, moisture prevention of electrical systems, and cleaning of electrical contacts.