AS ONE Corporation

Bộ phận ASTOOL & Phanh sạch AT　AT-840mL

Loại sấy nhanh, có thể được sử dụng để làm sạch dầu và chất béo, loại bỏ bụi, tháo gỡ/lắp ráp, hoàn thành làm sạch, vv
Chất tẩy nhờn này không chứa chlorofluorocarbons hoặc dung môi clo hóa, và không tuân theo các quy định phòng chống ngộ độc dung môi hữu cơ.

AS ONE Corporation

AS Bộ phận công cụ & Bộ làm sạch phanh AT 30 Pieces　AT-840mL

A quick-drying type, it can be used for oil and fat cleaning, dust removal, disassembly and assembly, finish cleaning, etc.
This degreasing detergent does not contain CFCs or chlorinated solvents and is not subject to the organic solvent poisoning prevention regulations.

COSMOBEAUTY Co., Ltd.

Chất bôi trơn (thanh sạch) 420mL　601S11520

Provides excellent lubrication, rust prevention, and dehumidification.
The strong seepage force provides lubrication to parts of the machine that have become immobile or rusted bolts, nuts and screws.

SLIDE

Silicon phun SLIDE　40112N

Silicon spray with high heat resistance.
Chlorine-free.

TRUSCO NAKAYAMA CORPORATION

Α shantunon Loại khí Trao đổi chai nhựa 350ml　ECO-HS-C

The organic molybdenum compound penetrates into the deep part along with the oil to produce sliding.
Since it does not use injection gas (LPG), it is safer and more environmentally friendly than aerosol spray.

TRUSCO NAKAYAMA CORPORATION

Shinto 4L

TRUSCO NAKAYAMA CORPORATION

Nguồn Rosen 420ml　PR-420

Powerful water-repellent, moisture- and rust-proof power expels moisture and rust from metal surfaces such as machines, parts, tools and jigs.
It is non-chlorine, so you can use it safely.

KURE Engineering Ltd. (KURE)

5-563. 785L

KURE Engineering Ltd. (KURE)

5-56DX 420ml

KURE Engineering Ltd. (KURE)

Siêu 5-56 70ml　NO3026

It contains fluoroplastic (PTFE) and an extreme pressure agent to maximize the performance of moving parts, high temperature parts, extreme pressure parts and high load parts.
Special additives prevent rust generation for a long time by penetrating even the smallest holes and crevices on the metal surface to form a strong coating that blocks contact with moisture, salt and oxygen.

KURE Engineering Ltd. (KURE)

5-56 Không mùi 330ml　NO1048

By replacing water on the metal surface with strong penetration force and forming a thin film, it exhibits excellent lubrication and rust prevention.
Suitable for use in places that are sensitive to odors.

KURE Engineering Ltd. (KURE)

5-56 > loại Bút < 8ml　NO1104

Just by lightly applying it with the tip of a pen, it has four effects: lubrication, rust prevention, cleaning, and moisture prevention.
Since it is a pen type, there is no dripping or scattering, so you can easily use the pin point.

Devcon

LPS2 mạnh mẽ thâm nhập đa năng bôi trơn 369mL　L00216

You can make a non-dry oily film. (Wet Film Formation)
You can loosen rusted or frozen areas.

FINE CHEMICAL JAPAN Co., Ltd.

Xích Lub 420ml　FC-163

Reduces wear and stains on fast rotating chains and gears.
The viscous molybdenum grease does not splash and extends the life of the chain.

ThreeBond Co., Ltd.

Sen cuộn 180ml

ThreeBond Co., Ltd.

Bôi trơn thẩm thấu Chất chống gỉ Chất lỏng vít 480ml　TB1807

It is odorless.
It has little effect on plastics and works effectively on plastic parts.

KURE Engineering Ltd. (KURE)

6-66 315ml　NO1054

Rust, moisture and lubricant for marine use to keep ships in the best condition.
Superior water displacement and strong removal of moisture and moisture adhering to metal surfaces.

COSMOBEAUTY Co., Ltd.

Dầu nhớt 601 (420ml)　1458

Effective for tight gaps that cannot be penetrated with normal oil. In addition, it quickly penetrates into bolts and sliding parts that have become stuck due to rusting or sticking, thereby improving movement.
Smoothes the movement by taking the squeaking sound.

Henkel Japan Ltd.

Đóng & phát hành miễn phí 480ml　FREEZE

Spray the rusted screw for 5 to 10 seconds (-45°C) to allow the lubricant to enter the metal shrinkage and make it easier to remove the screw.
For lubrication of screws that do not come off, and for cooling or shaving.

ThreeBond Co., Ltd.

Phòng chống gỉ Chất bôi trơn gấu trúc 18 d 420ml thấm thấm

TASETO Co., Ltd.

Loại Bystrol E450　BE450

This is a convenient anti-rust lubricant with excellent permeability, lubricity, strong water displacement, and rustproofing properties that can be used for multiple purposes.
For anti-rust lubrication of metal parts such as industrial machines (water replacement type).

DAIZO CORPORATION

Thêm Moss A S-01 Phòng chống rỉ dầu bôi trơn 420ml　4006240

Organic molybdenum with excellent lubricity is dispersed in a strong penetrating oil, so it penetrates deeply and strongly, and at the same time has an excellent lubricating effect.
Since the injection port is 2-way type, you can switch between fog and straight without removing the button.

Sumico Lubricant Co., Ltd.

Phun (xâm nhập và bôi trơn và chất chống gỉ) Sumi Oil EP Spray 420ml　522036

This is a baking prevention type osmotic spray that contains a high concentration of special extreme pressure additives in a highly osmotic low viscosity oil.
It is especially effective for lubrication under high load.

ThreeBond Co., Ltd.

Không mùi Rosen 420ml　TB1804

It is an anti-rust lubricant with strong penetrating power that is almost odorless.
Does not contain toxic ingredients and has no effect on plastic.

Sumico Lubricant Co., Ltd.

Phun (xâm nhập và bôi trơn và chất chống gỉ) Mori Spray 330ml　RPS

It facilitates the decomposition of the part where rust and dust are stuck. Also, since it is water replaceable, it has a rust prevention effect.
Disassembly of bolts and nuts.

KURE Engineering Ltd. (KURE)

Keo bôi trơn cao 420ml　NO1060

A highly adhesive lubricant spray that contains a water-resistant and heat-resistant lubricant and fluoropolymer.
It also has an anti-rust effect.

KURE Engineering Ltd. (KURE)

Siêu chuỗi Lub 180ml　NO1068

This is a premium performance chain exclusive lubricant with excellent water and abrasion resistance and long-term lubricating effect.
It does not scatter even when running after spraying.

Sumico Lubricant Co., Ltd.

Phun (chuỗi cho dầu) smykow chuỗi phun 330ml　RCS

It penetrates well into the gap between the pin and the bush, which is the point of chain lubrication, and forms a lubricating film, thereby preventing chain elongation and wear.
In the chain of industrial machinery, construction machinery, agricultural machinery, etc.

TOAGOSEI CO., LTD.

Ròng 220ml　AA-P

It reduces friction and has a quick effect.
Has good penetration with anti-rust and anti-fouling effects.

TRUSCO NAKAYAMA CORPORATION

Phun dầu Tef 420ml　PTFE-420SP

A thin film high performance lubricant containing ultra-fine particles of white solid lubricant and fluororesin (PTFE).
It adheres well to complex friction surfaces to prevent wear.

Sumico Lubricant Co., Ltd.

Sumitec 68 Spray (thâm nhập, bôi trơn, chất chống gỉ, 420mL)　ST68

Contains low friction fluororesin (PTFE) and organic molybdenum for wear prevention.
For rotating, sliding parts, gears, and chains of industrial, precision, machine, printing, and bookbinding machines.

Sumico Lubricant Co., Ltd.

Máy phun dầu Mori F 100 (Chịu nhiệt, dầu mài mòn, 480mL)　MO100S

This oil spray contains purified mineral oil and organic molybdenum compounds and antioxidants. Rich in pressure and abrasion resistance and durable.
a chain of various machines.

Sumico Lubricant Co., Ltd.

Smykow chuỗi phun PP　572133

It is a mineral oil-based oil with high viscosity containing fluororesin (PTFE).
For driving various industrial machines, transport chain link mechanisms, sliding parts, etc.

Sumico Lubricant Co., Ltd.

Phun (chịu nhiệt, dầu bám dính cao) pin Lub 330ml　PLS

Adhesive oil-like coating type.
The transparent coating adheres well to the complex sliding surface, keeping the mold clean and the pins sliding smoothly.

Sumico Lubricant Co., Ltd.

Xịt (cho dầu nhiệt độ cao) Xịt dầu nhiệt độ cao 420ml　521336

This high temperature oil spray contains heat-resistant synthetic oil (ester oil), special antioxidants and extreme pressure agents, and is solvent-free and aerosolized.
For the width adjustment screw of the tenter.

Konishi Co., Ltd.

Chất bôi trơn silicon trái phiếu 420ml (bình xịt có thể) #64327　BCJ-420

Quick-drying silicone lubricant.
Has good permeability and reduces friction.

SOFT99 corporation

Phun dầu mới　3018

Suitable for lubrication and rust protection of metal products, heat removal of electrical systems, and contact failure prevention.
It is convenient to switch the injection nozzle in one action.

KURE Engineering Ltd. (KURE)

Tác nhân trượt nhiều ứng dụng　NO1107

Since it is a solvent-free type, it improves the slipperiness of all kinds of materials such as plastic, wood and rubber besides metal.
Unscented silicone-based lubricant with little stickiness.

Henkel Japan Ltd.

Đại lý trượt Set 70ml　DSZ-070

It smooths the movement of the friction part and the stains, and improves the sliding.
It comes with a sliding bar for the threshold that won't fly on the floor.

COSMOBEAUTY Co., Ltd.

Bình xịt mỡ (420ml)　15079

A lithium grease spray that realizes heat resistance, water resistance, and long-term lubrication.
Prolonged rust and lubrication.