TRUSCO NAKAYAMA CORPORATION

Tấm kim loại hòa tan áp suất cao Tương ứng loại 18L

TRUSCO NAKAYAMA CORPORATION

Tấm kim loại nhũ tương Chất béo và dầu loại 18L

TRUSCO NAKAYAMA CORPORATION

Giải pháp hóa học tấm kim loại loại 18L

Sumico Lubricant Co., Ltd.

Nước làm mát (dán khai thác) Sumi Power Tap dán Super 1kg　STP-10

Ideal for hard-to-cut machining of stainless steel, etc.
It is a paste cutting agent.

Nihon Kohsakuyu Co., Ltd.

Khai thác dán C-101 (kim loại tổng hợp) 1kg

Nihon Kohsakuyu Co., Ltd.

Khai thác dán C-100 (loại clo) 1kg

Nihon Kohsakuyu Co., Ltd.

Khai thác dán C-101C (hợp kim đồng) 1kg　C-101C-1

Improves finish and work efficiency and extends tool life.
You can brush and brush.

R-GOT

Màu xanh lục nhạt 1L　R-4

In order to suppress heat generation during machining, an appropriate composition cutting edge can be obtained.
Difficult processing is easy, and it finishes beautifully.

FINE CHEMICAL JAPAN Co., Ltd.

Khai thác hợp chất A 420ml　FC-181

Reduces high temperature during cutting and prevents scratching.
For all metal tapping, screwing and drill reaming.

FINE CHEMICAL JAPAN Co., Ltd.

Dầu nhớt V Spray 420ml　FC-182-S

Light press, cutting and lubricating oil that disappears naturally.
No oil cleaning process is required after pressing or cutting.

TRUSCO NAKAYAMA CORPORATION

Α Khai thác phun vật liệu khó máy cho 420ml

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Phun cắt hiệu suất cao 420ml　MTS-420SP

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Α khai thác không khí loại khó khăn-to-máy vật liệu cho thay thế chai nhựa 350ml　ECO-TS-C

For difficult-to-cut machining of stainless steel, etc., and provides beautiful grinding.
Can be machined with light torque with no hard cutting and no mush.

TRUSCO NAKAYAMA CORPORATION

Mori Khai thác Non Gas loại hiệu suất cao cắt Trao đổi chai nhựa 350ml　ECO-MTS-C

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Mori khai thác dầu 1L

TRUSCO NAKAYAMA CORPORATION

N2 Khai thác phun Eco tươi phút thỏa mãn 270ml　N2-TSE

This is an environmentally friendly biodegradable cutting agent that uses vegetable oils as its main ingredient and has low smoke and odor. (Does not contain chlorine, sulfur, or heavy metals) The injection gas uses nonflammable nitrogen gas, which is contained in about 75% of the atmosphere.
Tap die processing.

DAIZO CORPORATION

Thêm Moss A S-02 Phun Xịt 420ml　4006340

Because it is a grease type, it has less scattering and dripping than an oil type, better stopping on the cutting edge, and produces an excellent cutting effect by applying only a small amount. It is an economical product with little loss.
Prevents heat generation, improves finish accuracy, and greatly extends tool life. The cutting powder is discharged well.

Sumico Lubricant Co., Ltd.

Chất làm mát (phụ gia, dầu) smykow Ultra tấm 300ml　SUC-3

Oil-like water-insoluble cutting agent containing extreme pressure agent. (Additives) Heavy cutting of stainless steel and hard alloys.
Drill, tap, and reamer.

Repco Co., Ltd.

Dầu cắt rau nhưng (baud 340ml

RIDGID

threading Oil Endura-Clear 1 Gal (3.78 L)

ISHIHASHI SEIKO

Là dầu　18L-N

To extend cutting efficiency and tool life.
Minute particles of molybdenum disulfide cut to 1 micron are added. Although molybdenum disulfide is a waxy soft mineral, it does not melt up to 1800°C.

ISHIHASHI SEIKO

Bình xịt dầu SS A (420 ML)　JSA

Cutting oil containing molybdenum dioxide.
The wear of cutting tools is low, and the life is extended, and the cutting surface is also finished gracefully.

ISHIHASHI SEIKO

Dầu SS 18 lít Loại L　IS18L

The wear of the cutting tool is reduced, the life is extended, and the cutting surface is finished beautifully.
It's liquid.

ISHIHASHI SEIKO

Là dầu　POIL

Comes in a pack.
The wear of the cutting tool is reduced, the life is extended, and the cutting surface is finished beautifully.

R-GOT

Stencolorin đỏ siêu gel 180g　R-5

For stainless steel.
It melts with heat, becomes liquid, and exhibits cutting force.

R-GOT

Stenorin Siêu Gel Xanh 180g　R-6

For general steel.
It melts with heat, becomes liquid, and exhibits cutting force.

SUZUKI YUSHI INDUSTRIAL CO., LTD.

Phép lạ siêu khai thác 4 l

TRUSCO NAKAYAMA CORPORATION

Mori Khai thác phun hiệu suất cao cắt Nozzle cho với 350ml　ECO-MTS-S

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Non-khí phun chuyên dụng Nozzle　ECO-NOZ

Nozzle dedicated to non-gas spray.
As a replacement nozzle for non-gas spray.

TRUSCO NAKAYAMA CORPORATION

Α khai thác phun khó khăn-to-máy vật liệu vòi phun cho với 350ml　ECO-TS-S

For difficult-to-cut machining of stainless steel, etc., and provides beautiful grinding.
Can be machined with light torque with no hard cutting and no mush.

Cắt dầu phun 420 mL　EA921SA-3

Can be used in a wide range of applications from general cutting to high-speed heavy cutting.
Excellent effect on materials such as carbon steel, alloy steel and stainless steel.

ASAHI ENGINEERING Co., Ltd.

Tấn Công Sinh Học　BA-1000

The temperature and pH of the oil agent make it a comfortable breeding nest for germs, and if not managed, the oil agent will spoil and produce a foul odor.
After the active ingredients are dissolved, the workplace is improved to a hygienic and comfortable working environment.

TRUSCO NAKAYAMA CORPORATION

Rừng cắt kim loại (Chất lỏng cắt tan trong nước)

TRUSCO NAKAYAMA CORPORATION

Rừng cắt kim loại (Chất lỏng cắt tan trong nước)

ESCO Company Ltd.

Chuỗi thấy dầu [hòa tan trong nước] 1.0L　EA920AK-8

ESCO Company Ltd.

Chuỗi thấy dầu 4.0L　EA920AK-10A

ESCO Company Ltd.

Dầu khoan búa 100mL　EA920AK-12

ESCO Company Ltd.

Dầu cắt 1.0L　EA920AK-27

ESCO Company Ltd.

Khai thác phun 420mL　EA921S-5

Cắt dầu, loại không clo　 Z-217

Convenient Cutting Oil Essential for Metal Processing
This cutting oil is applied during metal cutting and tapping.