Omikogyo Co., Ltd.

基板位元(刀锋直径:12.7公厘)　V46

By making two cuts in the opening corner of the baseboard at the joint of the wall and floor of the house with the baseboard bit, it is processed into a flat and safe shape with little peeling and chipping.
Work Material: Wood.

Omikogyo Co., Ltd.

Nick Bit (6公厘)

Omikogyo Co., Ltd.

硬质合金钻头(木造，直，Φ3×刃长10×全长35 mm)

Omikogyo Co., Ltd.

转角位(含导轨轴承，型号:30031)

STAR-M Corporation

通用Awl (可充电钻头30 x 120)

STAR-M Corporation

硬质合金通用旋翼30x120

TRUSCO NAKAYAMA CORPORATION

圆切机 (钢铁厂)

STAR-M Corporation

自由圆刀具 (30 x 120)

STAR-M Corporation

One Touch Awl (60 x 200)

ISHIHASHI SEIKO

铆钉切割机4.1　PRC4.1

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

铆钉切割机4.9　PRC4.9

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

铆钉切割机6.5　PRC6.5

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

铆钉切割器2.5 (3个)　3PRC2.5

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

铆钉切割器3.3 (3个)　3PRC3.3

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

铆钉切割器4.1 (3个)　3PRC4.1

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

铆钉切割器4.2 (3个)　3PRC4.2

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

铆钉切割器4.9 (3个)　3PRC4.9

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

铆钉切割器5.0 (3个)　3PRC5.0

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

铆钉切割器6.5 (3个)　3PRC6.5

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

点切机TIN涂层8.2 x 80 L　T-SPT8.2X80

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

点切机TIN涂层9.3 x 80 L　T-SPT9.3X80

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

点切机TIN涂层6.5 x 150 L　T-SPT6.5X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

点切机TIN涂层8.0 x 150 L　T-SPT8.0X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

点切机TIN涂层8.2 x 150 L　T-SPT8.2X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

点切机TIN涂层9.3 x 150 L　T-SPT9.3X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

点切机TIN涂层6.5 x 38 L　T-SPT6.5X38

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

点切机TIN涂层8.0 x 38 L　T-SPT8.0X38

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

点切机TA涂层 (TIALN) 6.5 x 38 L　TA-SPT6.5X38

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

点切机TA涂层 (TIALN) 8.0 x 38 L　TA-SPT8.0X38

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

点切机TA涂层 (TIALN) 8.2 x 80 L　TA-SPT8.2X80

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

点切机TA涂层 (TIALN) 8.0 x 150 L　TA-SPT8.0X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

点切机TA涂层 (TIALN) 8.2 x 150 L　TA-SPT8.2X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

点切机TA涂层 (TIALN) 9.3 x 80 L　TA-SPT9.3X80

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

点切机TA涂层 (TIALN) 6.5 x 150 L　TA-SPT6.5X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

点切机TA涂层 (TIALN) 9.3 x 150 L　TA-SPT9.3X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

JEFCOM

Woodworking Drill (Short Type)

Omikogyo Co., Ltd.

底部切割位 (刀片直径10mm)

ESCO Company Ltd.

木螺杆用孔钻具 [六角刀柄] 2.0~5.0mm 6个　EA824DM-200

This is an Esco original set.

Omikogyo Co., Ltd.

转角位(简单倒圆角形状1.5)　B15

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

转角位(简单倒圆角形状2.5)　B25

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.