Omikogyo Co., Ltd.

基板位元(刀锋直径:12.7公厘)　V46

By making two cuts in the opening corner of the baseboard at the joint of the wall and floor of the house with the baseboard bit, it is processed into a flat and safe shape with little peeling and chipping.
Work Material: Wood.

Omikogyo Co., Ltd.

Nick Bit (6公厘)

Omikogyo Co., Ltd.

硬质合金钻头(木造，直，Φ3×刃长10×全长35 mm)

Omikogyo Co., Ltd.

转角位(含导轨轴承，型号:30031)

Omikogyo Co., Ltd.

底部切割位 (刀片直径10mm)

Omikogyo Co., Ltd.

可调整的凹槽刀具 (3至15 mm)　120G

It is OK to use one cutter from narrow groove to wide groove.
The number of blades is larger than that of a normal cutter, and the screw of the wooden mouth hardly comes out.

Omikogyo Co., Ltd.

转角位(简单倒圆角形状1.5)　B15

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

转角位(简单倒圆角形状2.5)　B25

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

直位(含导轨轴承，6x 10 M15)　GM15

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

直位(含导轨轴承，6x 10 S 6)　GS6

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

转角位 (男性位)　HB

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

转角位元 (6 x 6.35)　KM635

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

转角位(倒角75°，Φ18mm)　KM75

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

转角位(接头切削DX、12 x 12)　MDX12

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

转角位(接头切削，长25)　ML25

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

可调整的凹槽刀具 (3至21)　W21G

It is OK to use one cutter from narrow groove to wide groove.
The number of blades is larger than that of a normal cutter, and the screw of the wooden mouth hardly comes out.

Omikogyo Co., Ltd.

转角位(侧凹槽，3x 4.5)　YB3

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

转角位(侧槽，6x 8)　YB6

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

［缺货］硬质合金钻头(木造，直，Φ6×刃长20×全长50 mm)

Omikogyo Co., Ltd.

［缺货］V凹槽位元(木工，6x 90°)　V90

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［缺货］U凹槽位元(木制品，6×6R3)

Omikogyo Co., Ltd.

［缺货］钻头(Flash结构面板，1个阶段，6x 6)

Omikogyo Co., Ltd.

［缺货］钻头(快闪结构面板，碳化物尖端，1级， 12 x 10)　1F1210

The part without the blade is the guide. Cut out along the base frame.
It can cut at about 20,000 ~ 30,000 revolutions per minute.

Omikogyo Co., Ltd.

［缺货］木工位(硬质合金1 Stage Flash位元，2P,6x 6)　1F66

Suitable for cutting out one side of veneer, board, etc.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

［缺货］木工位(Carbide 2 Stages Flash位元， 12 x 12)　2F1212

Cut out two boards such as a door in one shot.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

［缺货］木工位(硬质合金2阶段快闪位元，6x 6)　2F66

Cut out two boards such as a door in one shot.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

［缺货］木工位(硬质合金刀具， 2 D,6x 12)　A2D

Both male and female ant grooving can be done with one.
Cutting at about 20,000 ~ 30,000 revolutions per minute. Excellent sharpness, long life, and clean processing.

Omikogyo Co., Ltd.

［缺货］木工位(强大的1阶段Flash位元，8x 8)　K1F88

High rigidity high speed material is adopted for the base metal part, and it is also compatible with heavy cutting such as 2×4 window drawing.
The tip blade has a high speed blade, and the cutting blade has a super hard outer blade with good scrub, enabling faster work than conventional products.

Omikogyo Co., Ltd.

［缺货］木制品位(碳化物直，12 x 10)　S1210

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［缺货］木制品位(碳化物直，12 x 12)　S1212

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［缺货］木制品位(碳化物直，12 x 8)　S128

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［缺货］木制品位(碳化物直，8×8)　S88

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［缺货］木工位(U凹槽位元，6x 10 R 5)　U610

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Excellent sharpness, long life, and clean processing.

Omikogyo Co., Ltd.

［缺货］U凹槽位元(木制品，6×8R4)　U68

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Excellent sharpness, long life, and clean processing.