Mitsubishi Materials Corporation

硬质合金钻床(WSTAR,内润滑型，Φ3×叶长21×全长72)

Mitsubishi Materials Corporation

硬质合金钻床(WSTAR,外部润滑型，Φ3×刃长16×全长55)

Guhring Japan Corporation

硬质合金钻床(小直径，氧化铝涂料，Φ0.1×叶片长1.2×全长38 mm)

Guhring Japan Corporation

硬质合金钻床(小直径，氧化铝涂料，Φ1.0×刃长10×全长38 mm)

Guhring Japan Corporation

硬质合金钻床(小直径，氧化铝涂料，Φ2.0×叶片长12×全长38 mm)

Iwata Tool Ltd.

GP碳化物钻头(ALT涂层，短，Φ0.3×叶片长度1.8×全长40 mm)

Iwata Tool Ltd.

GP碳化物钻头(ALT涂层，标准，Φ0.3×叶片长度3.6×全长40 mm)

Omikogyo Co., Ltd.

硬质合金钻床(钢，短， 3 D型，外润滑型，Φ3.0 x刀锋长度15 x全长52 mm)

Omikogyo Co., Ltd.

硬质合金钻床(钢，普通，5D型，内润滑型，Φ3.0×叶片长度21×全长58 mm)

MAPAL KK

硬质合金钻床(MEGA-DRILL-180,内部润滑类型，X5D,Φ3.0 x刀锋长度28 x全长66 mm)

MAPAL KK

硬质合金钻床(一般用途SCD 350外部润滑X4D,Φ3×叶片长度22×全长62 mm)

MAPAL KK

硬质合金钻床(一般用途SCD 351内润滑型X4D,Φ3×叶长22×全长62 mm)

MAPAL KK

硬质合金钻床(MEGA-DRILL-Composite, SCD 250, External润滑，Φ3×刀锋长度28×全长66 mm)

MAPAL KK

硬质合金钻床(MEGA-DRILL-Composite, SCD 260, External润滑，Φ3×刀锋长度28×全长66 mm)

MAPAL KK

硬质合金钻床(MEGA-DRILL-Composite, SCD 271,内润滑，Φ6×刀锋长度44×全长82 mm)

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理， MSDH, 0.1 x 1)　MSDH 0.1X1

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理、MSDH、0.2 x 2)　MSDH 0.2X2

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理， MSDH, 0.25 x 2.5)　MSDH 0.25X2.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理、MSDH、0.3 x 3)　MSDH 0.3X3

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理， MSDH, 0.35 x 3.5)　MSDH 0.35X3.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理， MSDH, 0.4 x 4)　MSDH 0.4X4

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理， MSDH, 0.45 x 4.5)　MSDH 0.45X4.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理、MSDH、0.5×5)　MSDH 0.5X5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理， MSDH, 0.55 x 5.5)　MSDH 0.55X5.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理、MSDH、0.6 x 6)　MSDH 0.6X6

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理， MSDH, 0.65 x 6.5)　MSDH 0.65X6.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理、MSDH、0.7 x 7)　MSDH 0.7X7

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理， MSDH, 0.75 x 7.5)　MSDH 0.75X7.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理、MSDH、0.8 x 8)　MSDH 0.8X8

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理， MSDH, 0.85 x 8.5)　MSDH 0.85X8.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理、MSDH、0.9 x 9)　MSDH 0.9X9

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度处理， MSDH, 0.95 x 9.5)　MSDH 0.95X9.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物钻头(小型、高硬度加工、MSDH、Φ1×10)　MSDH 1X10

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN碳化物微钻(MUGEN微涂层，NSMD-MSΦ0.01 x 0.06)　NSMD-MS-0.01X0.06

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN碳化物微钻(MUGEN微涂层，NSMD-MSΦ0.015 x 0.09)　NSMD-MS-0.015X0.09

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN碳化物微钻(MUGEN微涂层，NSMD-MSΦ0.02 x 0.12)　NSMD-MS-0.02X0.12

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN碳化物微钻(MUGEN微涂层，NSMD-MSΦ0.025 x 0.15)　NSMD-MS-0.025X0.15

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN碳化物微钻(MUGEN微涂层，NSMD-MSΦ0.03 x 0.18)　NSMD-MS-0.03X0.18

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN碳化物微钻(MUGEN微涂层，NSMD-MSΦ0.035 x 0.24)　NSMD-MS-0.035X0.24

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN碳化物微钻(MUGEN微涂层，NSMD-MSΦ0.045 x 0.3)　NSMD-MS-0.045X0.3

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.