[Guhring Japan Corporation] 所有产品
公告供应
-
Square Endmill (3刀片，扭转角度45度，Φ1.0×刀片长度2 mm)
19找到 产品
JPY: 6,920-
USD: 43.06-
-
Endmill (多芯， RF 100 F,硬质切削材料，4片刀锋标准，Φ4×刀锋长度11 mm)
8找到 产品
JPY: 7,960-
USD: 49.53-
-
Endmill (Multiplead, RF 100 U, General Purpose, 4 Blade Regular,Φ4×Blade length 11 mm)
10找到 产品
JPY: 7,190-
USD: 44.74-
-
Square Endmill (多芯、RF 100 SF、6片高效抛光用刀片，Φ8×刀片长度:19 mm)
5找到 产品
JPY: 9,900-
USD: 61.60-
-
-
硬质合金钻床(小直径，氧化铝涂料，Φ0.1×叶片长1.2×全长38 mm)
90找到 产品
JPY: 6,610-
USD: 41.13-
-
硬质合金钻床(小直径，氧化铝涂料，Φ1.0×刃长10×全长38 mm)
99找到 产品
JPY: 6,090-
USD: 37.89-
-
硬质合金钻床(小直径，氧化铝涂料，Φ2.0×叶片长12×全长38 mm)
21找到 产品
JPY: 6,610-
USD: 41.13-
-
钴HSS直钻(Φ10.7 x刀锋长度94 x全长142 mm,水泡包装)
24找到 产品
JPY: 4,340-
USD: 27.00-
-
HSS直钻(Φ10.7 x刀锋长度94 x全长142 mm,水泡包装)
24找到 产品
JPY: 2,390-
USD: 14.87-
-
螺旋攻牙(公制螺纹，一般， TIN涂层， M 2 x 0.4,螺丝长度:4,精确度:OH 2)
13找到 产品
JPY: 2,940-
USD: 18.29-
-
Point Tap (公制螺纹) 粗锡涂层M2x0.4螺丝长度:8精度:OH2
13找到 产品
JPY: 3,550-
USD: 22.09-
-
无叶电源分接头 (盲孔和通孔) 粗锡涂层M2x04螺丝长度:4精度:RH4
13找到 产品
JPY: 4,090-
USD: 25.45-
-
-
-
-
NC探测钻孔 (氧化铝涂层) 沉孔角度 (°) :90长度:46刀柄直径:3
22找到 产品
JPY: 2,440-
USD: 15.18-
-
硬质合金NC定位钻孔沉孔角度 (°) :90长度:62刀柄直径:5
14找到 产品
JPY: 10,100-
USD: 62.84-
-
硬质合金NC喷孔 (氧化铝涂层) 沉孔角度 (°) :90长:62刀柄直径:5
14找到 产品
JPY: 11,700-
USD: 72.80-
-
TiAlN硬质合金轧制功率抽头粗M10。0X1.5 4447-M10.0X1.5
Since plastic deformation forms a thread, chips do not come out.
With coolant duct.1找到 产品
JPY: 44,100
USD: 274.39
-
TiAlN硬质合金滚压功率丝锥粗M12。0X1.75 4447-M12.0X1.75
Since plastic deformation forms a thread, chips do not come out.
With coolant duct.1找到 产品
JPY: 57,800
USD: 359.63
-
TiAlN硬质合金滚压功率丝锥粗M16。0X2.0 4447-M16.0X2.0
Since plastic deformation forms a thread, chips do not come out.
With coolant duct.1找到 产品
JPY: 80,100
USD: 498.38
-
TiAlN硬质合金滚压功率锥粗M20。0X2.5 4447-M20.0X2.5
Since plastic deformation forms a thread, chips do not come out.
With coolant duct.1找到 产品
JPY: 119,000
USD: 740.42
-
TiAlN硬质合金滚压电源丝锥粗M5。0X0.8 4447-M5.0X0.8
Since plastic deformation forms a thread, chips do not come out.
With coolant duct.1找到 产品
JPY: 26,000
USD: 161.77
-
TiAlN硬质合金滚压功率锥粗M6。0X1.0 4447-M6.0X1.0
Since plastic deformation forms a thread, chips do not come out.
With coolant duct.1找到 产品
JPY: 27,900
USD: 173.59
-
TiAlN硬质合金轧制功率抽头粗M8。0X1.25 4447-M8.0X1.25
Since plastic deformation forms a thread, chips do not come out.
With coolant duct.1找到 产品
JPY: 36,200
USD: 225.24
-
TiAlN Spiral Tap (高效率、粗线、M10X1.5) 4449-M10.0X1.5
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 6,340
USD: 39.45
-
TiAlN Spiral Tap (高效率、粗线、M12X1.7) 4449-M12.0X1.75
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 9,080
USD: 56.50
-
TiAlN Spiral Tap (高效率、粗线、M14X2.0) 4449-M14X2.0
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 13,200
USD: 82.13
-
TiAlN Spiral Tap (高效率、粗线、M16X2.0) 4449-M16.0X2.0
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 14,500
USD: 90.22
-
TiAlN Spiral Tap (高效率、粗线、M18X2.5) 4449-M18.0X2.5
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 19,300
USD: 120.09
-
TiAlN Spiral Tap (高效率、粗线、M2X0.4) 4449-M2.0X0.4
The machining range of work material is wide, and high-efficiency machining is possible.
Powdered Hice and TiAlN coating reduce wear and extend life.1找到 产品
JPY: 5,020
USD: 31.23
-
TiAlN Spiral Tap (高效率、粗螺纹、M2.5X0.45) 4449-M2.5X0.45
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 4,910
USD: 30.55
-
TiAlN Spiral Tap (高效率、粗线、M20X2.5) 4449-M20.0X2.5
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 22,800
USD: 141.86
-
TiAlN Spiral Tap (高效率、粗线、M30X0.5) 4449-M3.0X0.5
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 3,040
USD: 18.92
-
TiAlN Spiral Tap (高效率、粗线、M4X0.7) 4449-M4.0X0.7
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 3,140
USD: 19.54
-
TiAlN Spiral Tap (高效率、粗线、M5X0.8) 4449-M5.0X0.8
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 3,320
USD: 20.66
-
TiAlN Spiral Tap (高效率、粗线、M6x1.0 0) 4449-M6.0X1.0
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 3,410
USD: 21.22
-
TiAlN Spiral Tap (高效率、粗线、M8X1.25) 4449-M8.0X1.25
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 4,910
USD: 30.55
-
TiAlN Spiral Tap (高效率， UNF,M10X1.0) 4450-M10.0X1.0
The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.1找到 产品
JPY: 6,740
USD: 41.94
