开襟衫 (女士用)
过滤器
-
针钳 TP-20
Can be used for precision machining, hobbies, etc., for fine size drilling and as a tap holder.
Brass (brass) material with chrome plated surface.1找到 产品
JPY: 2,050
USD: 12.86
-
Pin Vise (全长105 mm,TP-23) TP-23
Holds drills and taps for drilling printed circuit boards and machining precision parts for versatile use.
1找到 产品
JPY: 2,200
USD: 13.80
-
Pin Vise (总长95公厘,TP-24) TP-24
Holds drills and taps for drilling printed circuit boards and machining precision parts for versatile use.
1找到 产品
JPY: 2,380
USD: 14.93
-
HOZAN TOOL INDUSTRIAL CO., LTD.
钻孔组, (Φ0.8~Φ3.2、5个、K-5) K-5
Available in a wide range of drill sizes
A small diameter size set that can be used in combination with pin vise (K-501/502), suitable for land-hole machining of substrates.1找到 产品
JPY: 3,160
USD: 19.82
-
HOZAN TOOL INDUSTRIAL CO., LTD.
钻孔组, (Φ1.5~Φ6.5、13个、K-493) K-493
Available in a wide range of sizes
This set is ideal for desk drills (K-16/21). Contains a steel case.1找到 产品
JPY: 8,100
USD: 50.81
-
HOZAN TOOL INDUSTRIAL CO., LTD.
钻孔组, (Φ1.0至Φ10.0、19个、K-494) K-494
本机适用于金属、塑料、木材等材料的铣削孔。
除了正面、背面和侧面铣削之外,这台机器还允许对角铣削材料。1找到 产品
JPY: 18,900
USD: 118.56
-
HOZAN TOOL INDUSTRIAL CO., LTD.
钻孔组, (Φ1.0至Φ10.0、19个、K-495) K-495
Available in a wide range of drill sizes
A small diameter size set that can be used in combination with pin vise (K-501/502), suitable for land-hole machining of substrates.1找到 产品
JPY: 2,820
USD: 17.69
-
-
Mitsubishi Materials Corporation
Cobalt HSS钻床(不锈钢13件1.5间距至6.5公厘/0.5公厘)
5找到 产品
JPY: 13,490-
USD: 84.62-
-
直钻组(13片,Φ1.5~Φ6.5 mm/0.5 mm间距) D13-S
Drill set for general drilling.
Convenient to carry with a steel case.1找到 产品
JPY: 8,080
USD: 50.68
-
直钻组(19片,Φ1.0至Φ10.0mm/0.5mm间距) D19-S
Drill set for general drilling.
Convenient to carry with a steel case.1找到 产品
JPY: 19,320
USD: 121.19
-
直钻组(25片,Φ1.0至Φ13.0mm/0.5mm间距) D25-S
Drill set for general drilling.
Convenient to carry with a steel case.1找到 产品
JPY: 38,250
USD: 239.93
-
直钻组(100片,Φ1.0至Φ10.0mm/0.1mm间距,Φ10.5至Φ13.0mm/0.5mm间距,Φ10.9,Φ11.9,Φ12.9mm) D100-RS
Drill set for general drilling.
Work Material: Mild Steel, General Steel, Cast Iron, Light Alloy.1找到 产品
JPY: 128,150
USD: 803.85
-
钻孔组(10片,超大尺寸,Φ3.0至Φ6.5 mm/0.5 mm间距) EXD-10S
With cross-thinning at the tip, this drill set does not require a punch and cuts quickly.
Work Material: General Steel, Stainless Steel.1找到 产品
JPY: 7,590
USD: 47.61
-
钻孔组(15片,超大尺寸,Φ3.0至Φ10.0mm/0.5mm间距) EXD-15S
Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.1找到 产品
JPY: 19,420
USD: 121.82
-
钻孔组(21片,超大尺寸,Φ3.0至Φ13.0mm/0.5mm间距) EXD-21S
Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.1找到 产品
JPY: 40,420
USD: 253.54
-
钻孔组(100片, Extra MASAMUNE,Φ1.0至Φ10.0mm/0.1mm间距,Φ10.5至Φ13.0mm/0.5mm间距,Φ10.9,Φ11.9,Φ12.9mm) EXD-100RS
Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.1找到 产品
JPY: 139,980
USD: 878.06
-
Cobalt HSS钻床(13片, MASAMUNE,Φ1.5~Φ6.5 mm/0.5 mm间距,Φ3.2 mm) COD-13S
This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
The sharpness does not affect hard-to-cut materials.1找到 产品
JPY: 12,330
USD: 77.34
-
Cobalt HSS钻床(19片, MASAMUNE,Φ1.0至Φ10.0mm/0.5mm间距) COD-19S
This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.1找到 产品
JPY: 30,560
USD: 191.70
-
Cobalt HSS钻床(25片, MASAMUNE,Φ1.0至Φ13.0mm/0.5mm间距) COD-25S
This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.1找到 产品
JPY: 60,130
USD: 377.18
-
Cobalt HSS钻床(100片, MASAMUNE,Φ1.0至Φ10.0mm/0.1mm间距,Φ10.5至Φ13.0mm/0.5mm间距,Φ10.9,Φ11.9,Φ12.9mm) COD-100RS
This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: General Steel, Stainless Steel.1找到 产品
JPY: 202,080
USD: 1,267.60
-
钴螺旋攻牙与钻孔组(21件,点击:M 3到M 12, Pilot Hole Drill:2.5到10.3 mm) COSSD-21
This is a set of spiral tap and downhole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.1找到 产品
JPY: 48,090
USD: 301.66
-
Cobalt Jet Spiral Tap&Drill Set (21件,点击:M 3到M 12, Pilot Hole Drill:2.5到10.3 mm) COJSD-21
It is a set of jet tap, spiral tap and bottom hole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.1找到 产品
JPY: 47,150
USD: 295.76
-
螺旋攻牙和钻孔组(21件,特大MASAMUNE,轻敲:M 3至M 12, Pilot Hole Drill:2.5至10.3公厘) SSD-21
This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.1找到 产品
JPY: 37,720
USD: 236.61
-
螺旋攻牙和钻孔组(26件, M 4, M 5, M 6, Pilot Hole Drill:3.4,4.3mm5.2) ESD-26S
This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.1找到 产品
JPY: 28,290
USD: 177.46
-
Cobalt Jet Spiral Tap&Drill Set (21件,特大MASAMUNE,轻敲:M 3至M 12, Pilot Hole Drill:2.5至10.3公厘) JSD-21
This is a set of jet tap, spiral tap and bottom hole drill for general steel.
Work Material: General Steel.1找到 产品
JPY: 36,780
USD: 230.71
-
掌上型轻触与钻孔组(21件,点击:M 3到M 12, Pilot Hole Drill:2.5到10.3 mm)
2找到 产品
JPY: 19,800-
USD: 124.20-
-
Mitsubishi Materials Corporation
三菱涂层钻具套装(型号:GSDSET 13) GSDSET13
It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.1找到 产品
JPY: 18,290
USD: 114.73
-
Mitsubishi Materials Corporation
三菱涂层钻具套装(型号:GSDSET 19) GSDSET19
It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.1找到 产品
JPY: 42,340
USD: 265.59
-
Mitsubishi Materials Corporation
三菱涂层钻具套装(型号:GSDSET 25) GSDSET25
It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.1找到 产品
JPY: 82,880
USD: 519.89
-
六轴钻孔组5件 6EXD-5S
Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.1找到 产品
JPY: 9,660
USD: 60.60
-
六轴钻孔组8件 6EXD-8S
Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.1找到 产品
JPY: 14,210
USD: 89.14
-
十六进位钻孔组10件 6EXD-10S
Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.1找到 产品
JPY: 17,250
USD: 108.21
-
十六轴钻孔 (Cobalt) 组10件 6COD-10P
Can be attached to and detached from the charging driver with one touch.
Due to its cutting-oriented design, it has a good bite and excellent sharpness.1找到 产品
JPY: 19,590
USD: 122.88
-
双人用刀具10件组 ETC-10S
A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1找到 产品
JPY: 12,840
USD: 80.54
-
双人用刀具15件组 ETC-15S
A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1找到 产品
JPY: 34,200
USD: 214.53
-
双人用刀具21件组 ETC-21S
A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1找到 产品
JPY: 68,400
USD: 429.06
-
双人用刀具10件组 MTC-10S
With our independently developed double special point, it can be drilled lightly, well cut, and beautifully without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1找到 产品
JPY: 15,600
USD: 97.86
-
双人用刀具15件组 MTC-15S
With our independently developed double special point, it can be drilled lightly, well cut, and beautifully without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1找到 产品
JPY: 38,400
USD: 240.87
-
