ISHIHASHI SEIKO

钴HSS直钻(MASAMUNE,Φ1.0 x刀锋长度18.5 x全长42.5公厘，水泡包装)

ISHIHASHI SEIKO

HSS直钻(Extra MASAMUNE,Φ1.5 x刀锋长度23.0 x总长度48.5公厘，水泡包装)

ISHIHASHI SEIKO

小直径刀尖钻孔(Ultra MUSASHI,Φ2.5 x刀锋长度35 x总长度61 mm,气泡套)

ISHIHASHI SEIKO

直钻组(13片，Φ1.5~Φ6.5 mm/0.5 mm间距)　D13-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

直钻组(19片，Φ1.0至Φ10.0mm/0.5mm间距)　D19-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

直钻组(25片，Φ1.0至Φ13.0mm/0.5mm间距)　D25-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

直钻组(100片，Φ1.0至Φ10.0mm/0.1mm间距，Φ10.5至Φ13.0mm/0.5mm间距，Φ10.9,Φ11.9,Φ12.9mm)　D100-RS

Drill set for general drilling.
Work Material: Mild Steel, General Steel, Cast Iron, Light Alloy.

ISHIHASHI SEIKO

钻孔组(10片，超大尺寸，Φ3.0至Φ6.5 mm/0.5 mm间距)　EXD-10S

With cross-thinning at the tip, this drill set does not require a punch and cuts quickly.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

钻孔组(15片，超大尺寸，Φ3.0至Φ10.0mm/0.5mm间距)　EXD-15S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

钻孔组(21片，超大尺寸，Φ3.0至Φ13.0mm/0.5mm间距)　EXD-21S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

钻孔组(100片， Extra MASAMUNE,Φ1.0至Φ10.0mm/0.1mm间距，Φ10.5至Φ13.0mm/0.5mm间距，Φ10.9,Φ11.9,Φ12.9mm)　EXD-100RS

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Cobalt HSS钻床(13片， MASAMUNE,Φ1.5~Φ6.5 mm/0.5 mm间距，Φ3.2 mm)　COD-13S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
The sharpness does not affect hard-to-cut materials.

ISHIHASHI SEIKO

Cobalt HSS钻床(19片， MASAMUNE,Φ1.0至Φ10.0mm/0.5mm间距)　COD-19S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt HSS钻床(25片， MASAMUNE,Φ1.0至Φ13.0mm/0.5mm间距)　COD-25S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt HSS钻床(100片， MASAMUNE,Φ1.0至Φ10.0mm/0.1mm间距，Φ10.5至Φ13.0mm/0.5mm间距，Φ10.9,Φ11.9,Φ12.9mm)　COD-100RS

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

钴螺旋攻牙与钻孔组(21件，点击:M 3到M 12, Pilot Hole Drill:2.5到10.3 mm)　COSSD-21

This is a set of spiral tap and downhole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt Jet Spiral Tap&Drill Set (21件，点击:M 3到M 12, Pilot Hole Drill:2.5到10.3 mm)　COJSD-21

It is a set of jet tap, spiral tap and bottom hole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

螺旋攻牙和钻孔组(21件，特大MASAMUNE,轻敲:M 3至M 12, Pilot Hole Drill:2.5至10.3公厘)　SSD-21

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

螺旋攻牙和钻孔组(26件， M 4, M 5, M 6, Pilot Hole Drill:3.4,4.3mm5.2)　ESD-26S

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Cobalt Jet Spiral Tap&Drill Set (21件，特大MASAMUNE,轻敲:M 3至M 12, Pilot Hole Drill:2.5至10.3公厘)　JSD-21

This is a set of jet tap, spiral tap and bottom hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

掌上型轻触与钻孔组(21件，点击:M 3到M 12, Pilot Hole Drill:2.5到10.3 mm)

ISHIHASHI SEIKO

HSS钻孔(细轴，主轴，类型6.5, 7.0×刀刃长度35×总长度75)

ISHIHASHI SEIKO

HSS钻孔(细轴，主轴，类型10、11.0×刀刃长度50×总长度90)

ISHIHASHI SEIKO

HSS钻孔(细轴， MASAMUNE, 13,Φ14.0×叶片长度85×全长140 mm)

ISHIHASHI SEIKO

HSS钻孔(六轴， MASAMUNE, 2.0×刀刃长度29×全长80)

ISHIHASHI SEIKO

高钻组 (六轴，马尾，5件，Φ2.0至4.0公厘 (0.5公厘) )

ISHIHASHI SEIKO

钴HSS钻(六轴， MASAMUNE, 2.0×刀刃长度29×全长80 mm)

ISHIHASHI SEIKO

点刀具HSS钻(六轴，Φ6.5 x刀锋长度24 x全长80 mm)

ISHIHASHI SEIKO

点刀具HSS钻(六轴， TIN涂层，Φ6.5 x刀锋长度24 x全长80 mm)

ISHIHASHI SEIKO

点刀具HSS钻(六轴， TiAlN涂层，Φ6.5 x刀锋长度24 x全长80 mm)

ISHIHASHI SEIKO

螺旋攻牙(公制螺纹， M 3 x 0.50,螺丝长度:18,精确度:H 2)

ISHIHASHI SEIKO

长颈螺旋水龙头(公制螺纹， L:100, M 3 x 0.5,螺丝长度:11,精确度:H 2)

ISHIHASHI SEIKO

螺旋攻牙(公制螺纹，不锈钢， M 2.0 x 0.40,螺丝长度:11,精密:H 1)

ISHIHASHI SEIKO

螺旋攻牙(公制螺纹，硬质合金专用钴HSS, M 3 x 0.50,螺丝长度:18,精确度:H 2)

ISHIHASHI SEIKO

钻孔攻牙(使用公制螺纹钻孔、HSS、通孔、M 3 x 0.50、螺丝长度:5,精确度:-)

ISHIHASHI SEIKO

Jet Power Tap (公制螺纹) M2.0x0.40螺丝长度:11精度:H 1

ISHIHASHI SEIKO

Jet Power Tap (螺纹) W 1/8螺丝长度:18精度:H 2

ISHIHASHI SEIKO

Jet Power Tap (公制螺纹) 长颈M3x0.5螺丝长度:11精度:H 2长度:100

ISHIHASHI SEIKO

长喷射电源分接头 (公制螺纹) M3x0.50螺丝长度:18精度:H 2长度:100

ISHIHASHI SEIKO

Jet Power Tap (统一螺丝) 粗螺纹UNC 1/4螺丝长度:24精度:H 2