Omikogyo Co., Ltd.

Baseboards Bit (Đường kính lưỡi: 12,7mm)　V46

By making two cuts in the opening corner of the baseboard at the joint of the wall and floor of the house with the baseboard bit, it is processed into a flat and safe shape with little peeling and chipping.
Work Material: Wood.

Omikogyo Co., Ltd.

Nick Bit (6mm)

Omikogyo Co., Ltd.

Mũi khoan cacbua (Đồ gỗ, thẳng, Φ6 × Chiều dài lưỡi 20 x Tổng chiều dài 50mm)

Omikogyo Co., Ltd.

Mũi khoan cacbua (Đồ gỗ, thẳng, Φ3 × Chiều dài lưỡi 10 × Tổng chiều dài 35mm)

Omikogyo Co., Ltd.

V Groove Bit (Đồ gỗ, 6 x 90 °)　V90

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

U Groove Bit (Đồ gỗ, 6 × 6R3)

Omikogyo Co., Ltd.

Mũi khoan (Bảng cấu trúc Flash, 1 giai đoạn, 6 x 6)

Omikogyo Co., Ltd.

Mũi khoan (Bảng cấu trúc flash, Mũi cacbua, 1 giai đoạn, 12 x 10)　1F1210

The part without the blade is the guide. Cut out along the base frame.
It can cut at about 20,000 ~ 30,000 revolutions per minute.

Omikogyo Co., Ltd.

Góc Bit (Với Hướng Dẫn Mang, Số Mô Hình: 30031)

STAR-M Corporation

Universal Awl (30 x 120 cho máy khoan có thể sạc lại)

STAR-M Corporation

Cacbua Universal Awl 30x120

TRUSCO NAKAYAMA CORPORATION

Máy cắt vòng tròn (Iron Works)

STAR-M Corporation

Máy cắt vòng tròn miễn phí (30 x 120)

STAR-M Corporation

One-Touch Awl (60 x 200)

ISHIHASHI SEIKO

Máy cắt đinh tán 4.1　PRC4.1

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đinh tán 4.9　PRC4.9

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đinh tán 6,5　PRC6.5

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đinh tán 2,5 (3 miếng)　3PRC2.5

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đinh tán 3.3 (3 miếng)　3PRC3.3

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đinh tán 4.1 (3 miếng)　3PRC4.1

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đinh tán 4.2 (3 miếng)　3PRC4.2

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đinh tán 4.9 (3 miếng)　3PRC4.9

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đinh tán 5.0 (3 miếng)　3PRC5.0

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đinh tán 6,5 (3 miếng)　3PRC6.5

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt điểm TIN tráng 8,2 x 80 L　T-SPT8.2X80

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Máy cắt điểm TIN tráng 9,3 x 80 L　T-SPT9.3X80

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Máy cắt điểm TIN tráng 6,5 x 150 L　T-SPT6.5X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Máy cắt điểm TIN tráng 8.0 x 150 L　T-SPT8.0X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Máy cắt điểm TIN tráng 8,2 x 150 L　T-SPT8.2X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Máy cắt điểm TIN tráng 9,3 x 150 L　T-SPT9.3X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Máy cắt điểm TIN tráng 6,5 x 38 L　T-SPT6.5X38

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Máy cắt điểm TIN tráng 8,0 x 38 L　T-SPT8.0X38

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Máy cắt điểm TA tráng (TIALN) 6,5 x 38 L　TA-SPT6.5X38

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Máy cắt điểm TA tráng (TIALN) 8,0 x 38 L　TA-SPT8.0X38

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Máy cắt điểm TA tráng (TIALN) 8,2 x 80 L　TA-SPT8.2X80

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Máy cắt điểm TA tráng (TIALN) 8,0 x 150 L　TA-SPT8.0X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Máy cắt điểm TA tráng (TIALN) 8,2 x 150 L　TA-SPT8.2X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Máy cắt điểm TA tráng (TIALN) 9,3 x 80 L　TA-SPT9.3X80

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Máy cắt điểm TA tráng (TIALN) 6,5 x 150 L　TA-SPT6.5X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Máy cắt điểm TA tráng (TIALN) 9,3 x 150 L　TA-SPT9.3X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.