Mitsubishi Materials Corporation

Máy khoan cacbua (WSTAR, Loại bôi trơn bên trong, Φ3 × Chiều dài lưỡi 21 × Tổng chiều dài 72)

Mitsubishi Materials Corporation

Máy khoan cacbua (WSTAR, Loại bôi trơn bên ngoài, Φ3 × Chiều dài lưỡi 16 × Tổng chiều dài 55)

Guhring Japan Corporation

Máy khoan cacbua (Đường kính nhỏ, Lớp phủ Alumina, Φ0,1 × Chiều dài lưỡi 1,2 × Tổng chiều dài 38mm)

Guhring Japan Corporation

Máy khoan cacbua (Đường kính nhỏ, Lớp phủ Alumina, Φ1.0 × Chiều dài lưỡi 10 × Tổng chiều dài 38mm)

Guhring Japan Corporation

Máy khoan cacbua (Đường kính nhỏ, Lớp phủ Alumina, Φ2.0 × Chiều dài lưỡi 12 × Tổng chiều dài 38mm)

Iwata Tool Ltd.

Máy khoan cacbua GP (Lớp phủ ALT, ngắn, Φ0,3 × Chiều dài lưỡi 1,8 x Tổng chiều dài 40mm)

Iwata Tool Ltd.

Máy khoan cacbua GP (Lớp phủ ALT, Thông thường, Φ0,3 × Chiều dài lưỡi 3,6 x Tổng chiều dài 40mm)

Omikogyo Co., Ltd.

Máy khoan cacbua (Thép, ngắn, loại 3D, Loại bôi trơn bên ngoài, Φ3.0 x Chiều dài lưỡi 15 x Tổng chiều dài 52mm)

Omikogyo Co., Ltd.

Máy khoan cacbua (Thép, Thường xuyên, Loại 5D, Loại bôi trơn bên trong, Φ3.0 × Chiều dài lưỡi 21 × Tổng chiều dài 58mm)

MAPAL KK

Máy khoan cacbua (MEGA-DRILL-180, Loại bôi trơn bên trong, X5D, Φ3.0 x Chiều dài lưỡi 28 x Tổng chiều dài 66mm)

MAPAL KK

Máy khoan cacbua (Mục đích chung, SCD 350, Bôi trơn bên ngoài X4D, Φ3 × Chiều dài lưỡi 22 x Tổng chiều dài 62mm)

MAPAL KK

Máy khoan cacbua (Mục đích chung, SCD 351, Loại bôi trơn bên trong, X4D, Φ3 × Chiều dài lưỡi 22 x Tổng chiều dài 62mm)

MAPAL KK

Máy khoan cacbua (MEGA-DRILL-Composite, SCD 250, Bôi trơn bên ngoài, Φ3 × Chiều dài lưỡi 28 x Tổng chiều dài 66mm)

MAPAL KK

Máy khoan cacbua (MEGA-DRILL-Composite, SCD 260, Bôi trơn bên ngoài, Φ3 × Chiều dài lưỡi 28 x Tổng chiều dài 66mm)

MAPAL KK

Máy khoan cacbua (MEGA-DRILL-Composite, SCD 271, Bôi trơn bên trong, Φ6 × Chiều dài lưỡi 44 x Tổng chiều dài 82mm)

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,1 x 1)　MSDH 0.1X1

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,2 x 2)　MSDH 0.2X2

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,25 x 2,5)　MSDH 0.25X2.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,3 x 3)　MSDH 0.3X3

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,35 x 3,5)　MSDH 0.35X3.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,4 x 4)　MSDH 0.4X4

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,45 x 4,5)　MSDH 0.45X4.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,5 × 5)　MSDH 0.5X5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,55 x 5,5)　MSDH 0.55X5.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,6 x 6)　MSDH 0.6X6

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,65 x 6,5)　MSDH 0.65X6.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,7 x 7)　MSDH 0.7X7

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,75 x 7,5)　MSDH 0.75X7.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,8 x 8)　MSDH 0.8X8

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,85 x 8,5)　MSDH 0.85X8.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,9 x 9)　MSDH 0.9X9

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Nhỏ, Xử lý độ cứng cao, MSDH, 0,95 x 9,5)　MSDH 0.95X9.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

Máy khoan cacbua NISSIN (Xử lý độ cứng cao, MSDH và Φ1 × 10)　MSDH 1X10

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0,01 x 0,06)　NSMD-MS-0.01X0.06

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0,015 x 0,09)　NSMD-MS-0.015X0.09

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0,02 x 0,12)　NSMD-MS-0.02X0.12

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0,025 x 0,15)　NSMD-MS-0.025X0.15

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0,03 x 0,18)　NSMD-MS-0.03X0.18

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0,035 x 0,24)　NSMD-MS-0.035X0.24

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0,045 x 0,3)　NSMD-MS-0.045X0.3

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.