ENGINEER. INC.

Ghim vise　TP-20

Can be used for precision machining, hobbies, etc., for fine size drilling and as a tap holder.
Brass (brass) material with chrome plated surface.

ENGINEER. INC.

Pin Vise (Tổng chiều dài 105mm, TP-23)　TP-23

Holds drills and taps for drilling printed circuit boards and machining precision parts for versatile use.

ENGINEER. INC.

Pin Vise (Tổng chiều dài 95mm, TP-24)　TP-24

Holds drills and taps for drilling printed circuit boards and machining precision parts for versatile use.

HOZAN TOOL INDUSTRIAL CO., LTD.

Bộ khoan, (Φ0,8 đến Φ3,2, 5 miếng, K-5)　K-5

Available in a wide range of drill sizes
A small diameter size set that can be used in combination with pin vise (K-501/502), suitable for land-hole machining of substrates.

HOZAN TOOL INDUSTRIAL CO., LTD.

Bộ khoan, (Φ1,5 đến Φ6,5, 13 miếng, K-493)　K-493

Available in a wide range of sizes
This set is ideal for desk drills (K-16/21). Contains a steel case.

HOZAN TOOL INDUSTRIAL CO., LTD.

Bộ khoan, (Φ1,0 đến Φ10,0, 19 miếng, K-494)　K-494

Máy này có thể được sử dụng để phay và cắt các lỗ trong các vật liệu như kim loại, nhựa hoặc gỗ.　　
Ngoài phay phía trước, phía sau và bên, máy này cũng cho phép bạn nghiền vật liệu theo đường chéo.

HOZAN TOOL INDUSTRIAL CO., LTD.

Bộ khoan, (Φ1,0 đến Φ10,0, 19 miếng, K-495)　K-495

Available in a wide range of drill sizes
A small diameter size set that can be used in combination with pin vise (K-501/502), suitable for land-hole machining of substrates.

Mitsubishi Materials Corporation

Bộ khoan thẳng (13 miếng, Φ1,5 đến 6,5mm / 0,5mm)

Mitsubishi Materials Corporation

Bộ khoan Cobalt HSS (Thép không gỉ, 13 miếng, 1,5 độ đến 6,5mm / 0,5mm)

ISHIHASHI SEIKO

Bộ khoan thẳng (13 miếng, Φ1,5 đến Φ6,5mm / 0,5mm)　D13-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Bộ khoan thẳng (19 miếng, Φ1.0 đến Φ10.0mm / 0.5mm)　D19-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Bộ khoan thẳng (25 miếng, Φ1.0 đến Φ13.0mm / 0.5mm)　D25-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Bộ khoan thẳng (100 miếng, Φ1.0 đến Φ10.0mm / 0.1mm, Φ10.5 đến Φ13.0mm / 0.5mm, Φ10.9, Φ11.9, Φ12.9mm)　D100-RS

Drill set for general drilling.
Work Material: Mild Steel, General Steel, Cast Iron, Light Alloy.

ISHIHASHI SEIKO

Bộ khoan (10 miếng, MASAMUNE thêm, Φ3.0 đến Φ6.5mm / 0.5mm)　EXD-10S

With cross-thinning at the tip, this drill set does not require a punch and cuts quickly.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Bộ khoan (15 miếng, MASAMUNE thêm, Φ3.0 đến Φ10.0mm / 0.5mm)　EXD-15S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Bộ khoan (21 miếng, MASAMUNE thêm, Φ3.0 đến Φ13.0mm / 0.5mm)　EXD-21S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Bộ khoan (100 miếng, MASAMUNE bổ sung, Φ1.0 đến Φ10.0mm / 0.1mm, Φ10.5 đến Φ13.0mm / 0.5mm, Φ10.9, Φ11.9, Φ12.9mm)　EXD-100RS

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Bộ khoan Cobalt HSS (13 miếng, MASAMUNE, Φ1,5 đến Φ6,5mm / 0,5mm, Φ3,2mm)　COD-13S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
The sharpness does not affect hard-to-cut materials.

ISHIHASHI SEIKO

Bộ khoan Cobalt HSS (19 miếng, MASAMUNE, Φ1.0 đến Φ10.0mm / 0.5mm)　COD-19S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Bộ khoan Cobalt HSS (25 miếng, MASAMUNE, Φ1,0 đến Φ13,0mm / 0,5mm)　COD-25S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Bộ khoan Cobalt HSS (100 miếng, MASAMUNE, Φ1.0 đến Φ10.0mm / 0.1mm, Φ10.5 đến Φ13.0mm / 0.5mm, Φ10.9, Φ11.9, Φ12.9mm)　COD-100RS

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Bộ Vòi & Khoan Xoắn Ốc Cobalt (21 Miếng, Vòi: M3 đến M12, Máy khoan lỗ thí điểm: 2,5 đến 10,3mm)　COSSD-21

This is a set of spiral tap and downhole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt Jet Spiral Tap & Drill Set (21 miếng, Tap: M3 đến M12, Máy khoan lỗ thí điểm: 2,5 đến 10,3mm)　COJSD-21

It is a set of jet tap, spiral tap and bottom hole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Bộ vòi & khoan xoắn ốc (21 miếng, MASAMUNE bổ sung, Tap: M3 đến M12, Máy khoan lỗ thí điểm: 2,5 đến 10,3mm)　SSD-21

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Bộ khoan & khoan xoắn ốc (26 miếng, M4, M5, M6, Máy khoan lỗ thí điểm: 3,4, 4,3mm 5,2)　ESD-26S

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Máy khoan và vòi xoắn ốc Cobalt Jet (21 miếng, MASAMUNE bổ sung, Tap: M3 đến M12, Máy khoan lỗ thí điểm: 2,5 đến 10,3mm)　JSD-21

This is a set of jet tap, spiral tap and bottom hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Bộ vòi tay & khoan (21 miếng, Tap: M3 đến M12, Máy khoan lỗ thí điểm: 2,5 đến 10,3mm)

Mitsubishi Materials Corporation

Bộ khoan sơn Mitsubishi (Số mô hình: GSDĐẶT 13)　GSDSET13

It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.

Mitsubishi Materials Corporation

Bộ khoan sơn Mitsubishi (Số mô hình: GSDĐẶT 19)　GSDSET19

It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.

Mitsubishi Materials Corporation

Bộ khoan sơn Mitsubishi (Số mô hình: GSDSET 25)　GSDSET25

It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.

ISHIHASHI SEIKO

Bộ khoan trục Hex 5 miếng　6EXD-5S

Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.

ISHIHASHI SEIKO

Bộ khoan trục Hex 8 miếng　6EXD-8S

Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.

ISHIHASHI SEIKO

Bộ khoan trục Hex 10 miếng　6EXD-10S

Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.

ISHIHASHI SEIKO

Khoan Trục Hex (Cobalt) Đặt 10 Miếng　6COD-10P

Can be attached to and detached from the charging driver with one touch.
Due to its cutting-oriented design, it has a good bite and excellent sharpness.

ISHIHASHI SEIKO

Máy cắt đôi Set 10 miếng　ETC-10S

A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đôi Set 15 miếng　ETC-15S

A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đôi 21 miếng　ETC-21S

A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đôi Set 10 miếng　MTC-10S

With our independently developed double special point, it can be drilled lightly, well cut, and beautifully without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Máy cắt đôi Set 15 miếng　MTC-15S

With our independently developed double special point, it can be drilled lightly, well cut, and beautifully without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Bộ khoan HSS 41 miếng　D-41S

Steel case included.
Convenient set of 41 pieces.