MAPAL KK

탄화물 드릴(메가드릴, 알라미드 섬유, X3D, 위3 × 블레이드 길이 12mm 총 길이 40mm)

DIXI Polytool

카바이드 드릴 (# 1130 시리즈, 와 0.4 x 블레이드 길이 6 x 총 길이 30mm)

Fukudaseiko

스트레이트 생크 드릴(Straight Shank Drill)[카바이드 블레이드(Carbide Blade)가 있는 것으로, 위3.0× 블레이드 길이 43× 총 길이 75mm]

Fukudaseiko

슬림형 생크드릴(카바이드 블레이드가 부착된 것) : 014.0 × 블레이드 길이 70 × 총 길이 150mm)

Omikogyo Co., Ltd.

V 탄화물 드릴(짧음, 위3.0 x 블레이드 길이 20 x 총 길이 60mm)

botek Prazisionsbohrtechnik GmbH

총 드릴 (탄화물 팁 브레이징 유형, × 3 총 길이 150 x 최대 가공 깊이) : 60mm)

NS TOOL Co., Ltd.

NISSIN Micro-Drill (Short, NSMD-S, Transmit0.01 x 0.06, 모델 번호: NSDS 0.01 X 0.06)　NSMD-S-0.01X0.06

The groove length is 6 times larger than the blade diameter for a short type and stable machining is possible.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.02 or More) Work Material: Aluminum, Copper, Resin.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (Short, NSMD-S, Transmit0.015 x 0.09, 모델 번호: NSDS 0.015 X 0.09)　NSMD-S-0.015X0.09

The groove length is 6 times larger than the blade diameter for a short type and stable machining is possible.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.02 or More) Work Material: Aluminum, Copper, Resin.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (Short, NSMD-S, Ø0.02 x 0.12, 모델 번호 : NSDS 0.02 X 0.12)　NSMD-S-0.02X0.12

The groove length is 6 times larger than the blade diameter for a short type and stable machining is possible.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.02 or More) Work Material: Aluminum, Copper, Resin.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (Short, NSMD-S, Transmit0.025 x 0.15, 모델 번호: (NSDS 0.025 X 0.15)　NSMD-S-0.025X0.15

The groove length is 6 times larger than the blade diameter for a short type and stable machining is possible.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.02 or More) Work Material: Aluminum, Copper, Resin.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (Short, NSMD-S, Ø0.03 x 0.18, 모델 번호 : (NSDS 0.03 X 0.18)　NSMD-S-0.03X0.18

The groove length is 6 times larger than the blade diameter for a short type and stable machining is possible.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.02 or More) Work Material: Aluminum, Copper, Resin.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (Short, NSMD-S, Transmit0.04 x 0.24, 모델 번호: (NSDS 0.04 X 0.24)　NSMD-S-0.04X0.24

The groove length is 6 times larger than the blade diameter for a short type and stable machining is possible.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.02 or More) Work Material: Aluminum, Copper, Resin.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (Short, NSMD-S, Ø0.05 x 0.3, 모델 번호: NSDS 0.05 X 0.3)　NSMD-S-0.05X0.3

The groove length is 6 times larger than the blade diameter for a short type and stable machining is possible.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.02 or More) Work Material: Aluminum, Copper, Resin.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (NSMD, Ø0.01 x 0.1, 모델 번호 : NSMD 0.01 X 0.1)　NSMD-0.01X0.1

All of the NS manufacturing technologies have been integrated and standardized from tip diameter φ0.01.
A micro drill with a very small diameter that opens up a new area of drilling.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (NSMD, Ø0.015 x 0.15, 모델 번호 : (NSMD 0.015 X 0.15)　NSMD-0.015X0.15

All of the NS manufacturing technologies have been integrated and standardized from tip diameter φ0.01.
A micro drill with a very small diameter that opens up a new area of drilling.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (NSMD, Ø0.02 x 0.2, 모델 번호 : NSMD 0.02 X 0.2)　NSMD-0.02X0.2

All of the NS manufacturing technologies have been integrated and standardized from tip diameter φ0.01.
A micro drill with a very small diameter that opens up a new area of drilling.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (NSMD, Ø0.025 x 0.25, 모델 번호 : (NSMD 0.025 X 0.25)　NSMD-0.025X0.25

All of the NS manufacturing technologies have been integrated and standardized from tip diameter φ0.01.
A micro drill with a very small diameter that opens up a new area of drilling.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (NSMD, Ø0.03 x 0.3, 모델 번호 : NSMD 0.03 X 0.3)　NSMD-0.03X0.3

All of the NS manufacturing technologies have been integrated and standardized from tip diameter φ0.01.
A micro drill with a very small diameter that opens up a new area of drilling.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (NSMD, Ø0.04 x 0.4, 모델 번호 : NSMD 0.04 X 0.4)　NSMD-0.04X0.4

All of the NS manufacturing technologies have been integrated and standardized from tip diameter φ0.01.
A micro drill with a very small diameter that opens up a new area of drilling.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (NSMD, Ø0.05 x 0.5, 모델 번호 : NSMD 0.05 X 0.5)　NSMD-0.05X0.5

All of the NS manufacturing technologies have been integrated and standardized from tip diameter φ0.01.
A micro drill with a very small diameter that opens up a new area of drilling.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (NSMD, Ø0.06 x 0.6, 모델 번호 : NSMD 0.06 X 0.6)　NSMD-0.06X0.6

All of the NS manufacturing technologies have been integrated and standardized from tip diameter φ0.01.
A micro drill with a very small diameter that opens up a new area of drilling.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (NSMD, Ø0.07 x 0.7, 모델 번호 : NSMD 0.07 X 0.7)　NSMD-0.07X0.7

All of the NS manufacturing technologies have been integrated and standardized from tip diameter φ0.01.
A micro drill with a very small diameter that opens up a new area of drilling.

NS TOOL Co., Ltd.

NISSIN Micro-Drill (NSMD, Ø0.09 x 0.9, 모델 번호 : NSMD 0.09 X 0.9)　NSMD-0.09X0.9

All of the NS manufacturing technologies have been integrated and standardized from tip diameter φ0.01.
A micro drill with a very small diameter that opens up a new area of drilling.

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.01 x 0.015, 모델 번호: NSPD 0.01 X 0.015)　NSPD-0.01X0.015

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.015 x 0.025, 모델 번호: NSPD 0.015 X 0.025)　NSPD-0.015X0.025

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.02 x 0.04, 모델 번호: NSPD 0.02 X 0.04)　NSPD-0.02X0.04

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.025 x 0.05, 모델 번호: NSPD 0.025 X 0.05)　NSPD-0.025X0.05

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.03 x 0.06, 모델 번호: NSPD 0.03 X 0.06)　NSPD-0.03X0.06

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.04 x 0.08, 모델 번호: NSPD 0.04 X 0.08)　NSPD-0.04X0.08

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.05 x 0.1, 모델 번호: NSPD 0.05 X 0.1)　NSPD-0.05X0.1

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.06 x 0.12, 모델 번호: NSPD 0.06 X 0.12)　NSPD-0.06X0.12

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.07 x 0.14, 모델 번호: NSPD 0.07 X 0.14)　NSPD-0.07X0.14

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.08 x 0.16, 모델 번호: NSPD 0.08 X 0.16)　NSPD-0.08X0.16

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.09 x 0.18, 모델 번호: NSPD 0.09 X 0.18)　NSPD-0.09X0.18

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

NS TOOL Co., Ltd.

NISSIN Micropoint Drill(파일럿 구멍 처리, NSPD, 0.1 x 0.2, 모델 번호: NSPD 0.1 X 0.2)　NSPD-0.1X0.2

This drill supports micro drill hole machining.
Uses thinning at the tip to reduce cutting load and stabilize drilling accuracy. (φ0.025 or More)

Mitsubishi Materials Corporation

Mitsubishi Carbide Drill (Burnishing Drill, 알루미늄 / 주철, 외부 윤활형, 모델 번호 : MAE0300MB HTI 10)　MAE0300MBHTI10

Can be used for rolling tap hole.
High speed machining possible (MAS type) with twisted coolant holes.

Mitsubishi Materials Corporation

Mitsubishi Carbide Drill (Burnishing Drill, 알루미늄 / 주철, 외부 윤활형, 모델 번호 : MAE0330MB HTI 10)　MAE0330MBHTI10

Can be used for rolling tap hole.
High speed machining possible (MAS type) with twisted coolant holes.

Mitsubishi Materials Corporation

Mitsubishi Carbide Drill (Burnishing Drill, 알루미늄 / 주철, 외부 윤활형, 모델 번호 : MAE 0365MB HTI 10)　MAE0365MBHTI10

Can be used for rolling tap hole.
High speed machining possible (MAS type) with twisted coolant holes.

Mitsubishi Materials Corporation

Mitsubishi Carbide Drill (Burnishing Drill, 알루미늄 / 주철, 외부 윤활형, 모델 번호 : MAE0400MB HTI 10)　MAE0400MBHTI10

Can be used for rolling tap hole.
High speed machining possible (MAS type) with twisted coolant holes.

Mitsubishi Materials Corporation

Mitsubishi Carbide Drill (Burnishing Drill, 알루미늄 / 주철, 외부 윤활형, 모델 번호 : MAE0420MB HTI 10)　MAE0420MBHTI10

Can be used for rolling tap hole.
High speed machining possible (MAS type) with twisted coolant holes.