ENGINEER. INC.

핀 바이스　TP-20

Can be used for precision machining, hobbies, etc., for fine size drilling and as a tap holder.
Brass (brass) material with chrome plated surface.

ENGINEER. INC.

핀 바이브(총 길이 105mm, TP-23)　TP-23

Holds drills and taps for drilling printed circuit boards and machining precision parts for versatile use.

ENGINEER. INC.

핀 바이브(총 길이 95mm, TP-24)　TP-24

Holds drills and taps for drilling printed circuit boards and machining precision parts for versatile use.

HOZAN TOOL INDUSTRIAL CO., LTD.

드릴세트(위0.8에서 위3.2까지, 조각 5개, K-5)　K-5

Available in a wide range of drill sizes
A small diameter size set that can be used in combination with pin vise (K-501/502), suitable for land-hole machining of substrates.

HOZAN TOOL INDUSTRIAL CO., LTD.

드릴세트(와 6.5, 13개, K-493)　K-493

Available in a wide range of sizes
This set is ideal for desk drills (K-16/21). Contains a steel case.

HOZAN TOOL INDUSTRIAL CO., LTD.

드릴세트()　K-494

이 기계는 금속, 플라스틱 또는 나무와 같은 재료의 구멍을 밀링하고 절단하는 데 사용될 수 있습니다.　　
전면, 후면 및 측면 밀링뿐만 아니라 이 머신에서는 재료를 대각선으로 밀링할 수도 있습니다.

HOZAN TOOL INDUSTRIAL CO., LTD.

드릴세트()　K-495

Available in a wide range of drill sizes
A small diameter size set that can be used in combination with pin vise (K-501/502), suitable for land-hole machining of substrates.

Mitsubishi Materials Corporation

스트레이트 드릴 세트 (13 조각, 0.5 ~ 6.5mm / 0.5mm 피치 )

Mitsubishi Materials Corporation

코발트 HSS 드릴 세트(스테인레스 스틸, 13피스, 1.5 피치에서 6.5mm / 0.5mm)

ISHIHASHI SEIKO

스트레이트 드릴 세트(13개, 1.5에서 6.5mm / 0.5mm 피치)　D13-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

스트레이트 드릴 세트(19개, 0. 1~0.　D19-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

스트레이트 드릴 세트(25개, 0. 1~0.　D25-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

스트레이트 드릴 세트 (100 개, 와 10.0 ~ 0.1mm 피치, 와 10.5 ~ 0.5mm 피치, 와 10.9, 와 11.9, 와 12.9mm)　D100-RS

Drill set for general drilling.
Work Material: Mild Steel, General Steel, Cast Iron, Light Alloy.

ISHIHASHI SEIKO

드릴 세트(10개, 여분의 MASAUNE, 위3.0에서 위6.5mm / 0.5mm 피치)　EXD-10S

With cross-thinning at the tip, this drill set does not require a punch and cuts quickly.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

드릴 세트(15매, 엑스트라 마사무네, 위3.0부터 위10.0mm / 0.5mm 피치)　EXD-15S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

드릴 세트(21개, 엑스트라 마사무네, 위3.0부터 위13.0mm / 0.5mm 피치)　EXD-21S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

드릴 세트(100), 엑스트라 마사무네, 외표면 0.0에서 0.1mm 피치, 외표면 10.5에서 13.0mm / 0.5mm 피치, 외표면 10.9, 외표면 12.9mm)　EXD-100RS

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

코발트 HSS 드릴 세트 (13개 조각, MASAUNE, 위1.5에서 위6.5mm / 0.5mm 피치, 위3.2mm)　COD-13S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
The sharpness does not affect hard-to-cut materials.

ISHIHASHI SEIKO

코발트 HSS 드릴 세트 (19개 조각, MASAUNE, 위1.0에서 위10.0mm / 0.5mm 피치)　COD-19S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

코발트 HSS 드릴 세트 (25개 조각, MASAUNE, 위1.0에서 위13.0mm / 0.5mm 피치)　COD-25S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

코발트 HSS 드릴 세트 (100 피스, MASAUNE, 외조1.0에서 외조 10.0mm / 0.1mm 피치, 외조 10.5에서 외조 13.0mm / 0.5mm 피치, 외조 10.9, 외조 12.9mm)　COD-100RS

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

코발트 나선형 탭 및 드릴링 세트(21개, 탭: M3에서 M12로, 파일럿 구멍 드릴: 2.5 ~ 1.03mm)　COSSD-21

This is a set of spiral tap and downhole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt Jet Spiral 탭 & 드릴 세트(21개, 탭: M3에서 M12로, 파일럿 구멍 드릴: 2.5 ~ 1.03mm)　COJSD-21

It is a set of jet tap, spiral tap and bottom hole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

나선형 탭 및 드릴 세트(21개 조각, 추가 MASAUNE, 탭: M3에서 M12로, 파일럿 구멍 드릴: 2.5 ~ 1.03mm)　SSD-21

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

나선형 탭 및 드릴 세트(26개, M4, M5, M6, 파일럿 구멍 드릴: 3.4, 4.3cm 5.2)　ESD-26S

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Cobalt Jet Spiral 탭 & 드릴 세트(21개 조각, 추가 MASAUNE, 탭: M3에서 M12로, 파일럿 구멍 드릴: 2.5 ~ 1.03mm)　JSD-21

This is a set of jet tap, spiral tap and bottom hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

손 탭 및 드릴 세트(21개, 탭: M3에서 M12로, 파일럿 구멍 드릴: 2.5 ~ 1.03mm)

Mitsubishi Materials Corporation

Mitsubishi 코팅 드릴 세트(모델 번호: GSDSET 13)　GSDSET13

It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.

Mitsubishi Materials Corporation

Mitsubishi 코팅 드릴 세트(모델 번호: GSDSET 19)　GSDSET19

It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.

Mitsubishi Materials Corporation

Mitsubishi 코팅 드릴 세트(모델 번호: GSDSET 25)　GSDSET25

It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.

ISHIHASHI SEIKO

16진수 축 드릴 세트 5개　6EXD-5S

Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.

ISHIHASHI SEIKO

16진수 축 드릴 세트 8개　6EXD-8S

Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.

ISHIHASHI SEIKO

16진수 축 드릴 세트 10개　6EXD-10S

Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.

ISHIHASHI SEIKO

16진수 축 드릴(코발트) 세트 10개　6COD-10P

Can be attached to and detached from the charging driver with one touch.
Due to its cutting-oriented design, it has a good bite and excellent sharpness.

ISHIHASHI SEIKO

트윈 커터 세트 10 피스　ETC-10S

A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

트윈 커터 세트 15 피스　ETC-15S

A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

트윈 커터 세트 21 피스　ETC-21S

A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

트윈 커터 세트 10 피스　MTC-10S

With our independently developed double special point, it can be drilled lightly, well cut, and beautifully without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

트윈 커터 세트 15 피스　MTC-15S

With our independently developed double special point, it can be drilled lightly, well cut, and beautifully without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

드릴 세트 HSS 41개　D-41S

Steel case included.
Convenient set of 41 pieces.