목재, 판재용 비트, 커터
필터
-
베이스보드 비트(블레이드 지름: 12.7cm) V46
By making two cuts in the opening corner of the baseboard at the joint of the wall and floor of the house with the baseboard bit, it is processed into a flat and safe shape with little peeling and chipping.
Work Material: Wood.1 제품을 찾았습니다.
JPY: 6,825
USD: 42.78
-
-
탄화물 드릴비트(목공, 직선, 위3 × 블레이드 길이 10 × 총 길이 35mm)
3 제품을 찾았습니다.
JPY: 6,900-
USD: 43.25-
-
-
-
-
-
-
-
리벳 커터 4.1 PRC4.1
With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1 제품을 찾았습니다.
JPY: 1,660
USD: 10.41
-
리벳 커터 4.9 PRC4.9
With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1 제품을 찾았습니다.
JPY: 1,960
USD: 12.29
-
리벳 커터 6.5 PRC6.5
With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1 제품을 찾았습니다.
JPY: 2,650
USD: 16.61
-
리벳 커터 2.5(3개) 3PRC2.5
With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1 제품을 찾았습니다.
JPY: 2,860
USD: 17.93
-
리벳 커터 3.3(3개) 3PRC3.3
With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1 제품을 찾았습니다.
JPY: 3,390
USD: 21.25
-
리벳 커터 4.1(3개) 3PRC4.1
With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1 제품을 찾았습니다.
JPY: 4,640
USD: 29.09
-
리벳 커터 4.2(3개) 3PRC4.2
With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1 제품을 찾았습니다.
JPY: 4,420
USD: 27.71
-
리벳 커터 4.9(3개) 3PRC4.9
With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1 제품을 찾았습니다.
JPY: 5,540
USD: 34.73
-
리벳 커터 5.0(3개) 3PRC5.0
With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1 제품을 찾았습니다.
JPY: 5,070
USD: 31.78
-
리벳 커터 6.5(3개) 3PRC6.5
With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.1 제품을 찾았습니다.
JPY: 7,590
USD: 47.58
-
스폿 커터 TIN 코팅 8.2 x 80L T-SPT8.2X80
Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.1 제품을 찾았습니다.
JPY: 6,700
USD: 42.00
-
스폿 커터 TIN 코팅 9.3 x 80L T-SPT9.3X80
Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.1 제품을 찾았습니다.
JPY: 8,250
USD: 51.71
-
스폿 커터 TIN 코팅 6.5 x 150L T-SPT6.5X150
Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.1 제품을 찾았습니다.
JPY: 8,390
USD: 52.59
-
스폿 커터 TIN 코팅 8.0 x 150L T-SPT8.0X150
Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.1 제품을 찾았습니다.
JPY: 9,340
USD: 58.55
-
스폿 커터 TIN 코팅 8.2 x 150L T-SPT8.2X150
Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.1 제품을 찾았습니다.
JPY: 9,340
USD: 58.55
-
스폿 커터 TIN 코팅 9.3 x 150L T-SPT9.3X150
Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.1 제품을 찾았습니다.
JPY: 11,210
USD: 70.27
-
스폿 커터 TIN 코팅 6.5 x 38L T-SPT6.5X38
Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.1 제품을 찾았습니다.
JPY: 5,980
USD: 37.49
-
스폿 커터 TIN 코팅 8.0 x 38L T-SPT8.0X38
Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.1 제품을 찾았습니다.
JPY: 6,720
USD: 42.12
-
스폿 커터 TA 코팅(TIALN) 6.5 x 38 L TA-SPT6.5X38
Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.1 제품을 찾았습니다.
JPY: 8,980
USD: 56.29
-
스폿 커터 TA 코팅(TIALN) 8.0 x 38L TA-SPT8.0X38
Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.1 제품을 찾았습니다.
JPY: 10,090
USD: 63.25
-
스폿 커터 TA 코팅(TIALN) 8.2 x 80L TA-SPT8.2X80
Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.1 제품을 찾았습니다.
JPY: 9,620
USD: 60.30
-
스폿 커터 TA 코팅(TIALN) 8.0 x 150 L TA-SPT8.0X150
Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.1 제품을 찾았습니다.
JPY: 14,010
USD: 87.82
-
스폿 커터 TA 코팅(TIALN) 8.2 x 150 L TA-SPT8.2X150
Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.1 제품을 찾았습니다.
JPY: 14,010
USD: 87.82
-
스폿 커터 TA 코팅(TIALN) 9.3 x 80L TA-SPT9.3X80
Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.1 제품을 찾았습니다.
JPY: 11,860
USD: 74.34
-
스폿 커터 TA 코팅(TIALN) 6.5 x 150 L TA-SPT6.5X150
Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.1 제품을 찾았습니다.
JPY: 12,600
USD: 78.98
-
스폿 커터 TA 코팅(TIALN) 9.3 x 150 L TA-SPT9.3X150
Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.1 제품을 찾았습니다.
JPY: 16,810
USD: 105.37
-
-
-
나무로 만든 스크루용 드릴세트[육각형 사태]2.0~5.0Mm 6Pcs EA824DM-200
This is an Esco original set.
1 제품을 찾았습니다.
JPY: 5,710
USD: 35.79
-
코너 비트(단순 라운드 형태 1.5) B15
Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.1 제품을 찾았습니다.
JPY: 6,075
USD: 38.08
-
코너 비트(단순 라운드 형태 2.5) B25
Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.1 제품을 찾았습니다.
JPY: 6,450
USD: 40.43
