Mitsubishi Materials Corporation

탄화물 드릴(WSTAR, 내부 윤활형, 위3 × 블레이드 길이 21 × 총 길이 72)

Mitsubishi Materials Corporation

탄화물 드릴(WSTAR, 외부 윤활형, 위3 × 블레이드 길이 16 × 총 길이 55)

Guhring Japan Corporation

탄화물 드릴(작은 직경, 알루미나 코팅, 로0.1 × 블레이드 길이 1.2 × 총 길이 38mm)

Guhring Japan Corporation

탄화물 드릴(작은 직경, 알루미나 코팅, 위1.0 × 블레이드 길이 10 × 총 길이 38mm)

Guhring Japan Corporation

탄화물 드릴(작은 직경, 알루미나 코팅, 위2.0 × 블레이드 길이 12 × 총 길이 38mm)

Iwata Tool Ltd.

GP Carbide Drill (ALT Coating, Short, Ø0.3 × 블레이드 길이 1.8 x 총 길이 40mm)

Iwata Tool Ltd.

GP Carbide Drill (ALT Coating, Regular, Ø0.3 × 블레이드 길이 3.6 x 총 길이 40mm)

Omikogyo Co., Ltd.

탄화물 드릴(강판, 짧은 유형, 3차원 유형, 외부 윤활형, 와3.0 x 블레이드 길이 15 x 총 길이 52mm)

Omikogyo Co., Ltd.

탄화물 드릴(강판, 정형, 5D형, 내부윤활형, 와3.0 × 블레이드 길이 21 × 총 길이 58mm)

MAPAL KK

탄화물 드릴(MEGA-DRILL-180, 내부 윤활형, X5D, 위3.0 x 블레이드 길이 28 x 총 길이 66mm)

MAPAL KK

탄화물 드릴 (범용, SCD 350, 외부 윤활 X4D, 위3 × 블레이드 길이 22 x 총 길이 62mm)

MAPAL KK

탄화물 드릴(범용, SCD 351, 내부 윤활형, X4D, 위3 × 블레이드 길이 22 x 총 길이 62mm)

MAPAL KK

탄화물 드릴 (메가-드릴-복합체, SCD 250, 외부 윤활, 위3 × 블레이드 길이 28 x 총 길이 66mm)

MAPAL KK

탄화물 드릴 (메가-드릴-복합체, SCD 260, 외부 윤활, 위3 × 블레이드 길이 28 x 총 길이 66mm)

MAPAL KK

탄화물 드릴 (메가-드릴-복합체, SCD 271, 내부 윤활, 위6 × 블레이드 길이 44 x 총 길이 82mm)

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.1 x 1)　MSDH 0.1X1

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.2 x 2)　MSDH 0.2X2

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.25 x 2.5)　MSDH 0.25X2.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.3 x 3)　MSDH 0.3X3

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.35 x 3.5)　MSDH 0.35X3.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.4 x 4)　MSDH 0.4X4

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.45 x 4.5)　MSDH 0.45X4.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.5 × 5)　MSDH 0.5X5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.55 x 5.5)　MSDH 0.55X5.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.6 x 6)　MSDH 0.6X6

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.65 x 6.5)　MSDH 0.65X6.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.7 x 7)　MSDH 0.7X7

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.75 x 7.5)　MSDH 0.75X7.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.8 x 8)　MSDH 0.8X8

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.85 x 8.5)　MSDH 0.85X8.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.9 x 9)　MSDH 0.9X9

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (소형, 고경도 프로세싱, MSDH, 0.95 x 9.5)　MSDH 0.95X9.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

니신 카바이드 드릴 (소형, 고경도 가공, MSDH 및 × 10)　MSDH 1X10

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

니신 카바이드 마이크로 드릴(NISSIN Carbide Micro-Drill)(MUGEN Microcoating, NSMD-MS Ø0.01 x 0.06)　NSMD-MS-0.01X0.06

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

니신 카바이드 마이크로 드릴(NISSIN Carbide Micro-Drill)(MUGEN Microcoating, NSMD-MS Ø0.015 x 0.09)　NSMD-MS-0.015X0.09

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

니신 카바이드 마이크로 드릴(NISSIN Carbide Micro-Drill)(MUGEN Microcoating, NSMD-MS X 0.02 x 0.12)　NSMD-MS-0.02X0.12

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

니신 카바이드 마이크로 드릴(NISSIN Carbide Micro-Drill)(MUGEN Microcoating, NSMD-MS X 0.025 x 0.15)　NSMD-MS-0.025X0.15

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

니신 카바이드 마이크로 드릴(NISSIN Carbide Micro-Drill)(MUGEN Microcoating, NSMD-MS X 0.03 x 0.18)　NSMD-MS-0.03X0.18

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

니신 카바이드 마이크로 드릴(NISSIN Carbide Micro-Drill)(MUGEN Microcoating, NSMD-MS Ø0.035 x 0.24)　NSMD-MS-0.035X0.24

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

니신 카바이드 마이크로 드릴(NISSIN Carbide Micro-Drill)(MUGEN Microcoating, NSMD-MS Ø0.045 x 0.3)　NSMD-MS-0.045X0.3

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.