NS TOOL Co., Ltd.

Endmill(무한 코팅, 2개의 블레이드, MSE 230, 0.1 × 블레이드 길이 0.15mm)

NS TOOL Co., Ltd.

엔드밀(Endmill)[이중 블레이드 길이형(알루미늄의 경우에는 도포하지 아니한 것에 한하며, AL2D-2, 0.5 x 블레이드 길이 1mm]

NS TOOL Co., Ltd.

Endmill(무한 코팅, Power Z, MSZ 345, × 블레이드 길이 1.5mm)

NS TOOL Co., Ltd.

Endmill(알루미늄, ALZ 345, 1.5 × 블레이드 길이 2.3mm용 고효율 헤비 커팅)

NS TOOL Co., Ltd.

Ball Endmill(무한 코팅, 2개의 블레이드, 볼 반경: 0.05 x 블레이드 길이: 0.1)

NS TOOL Co., Ltd.

볼 엔드밀(고경도, 2개의 블레이드, 볼 반경: 0.15 x 블레이드 길이: 0.3)　MSBH230 R0.15-D4

Standard type ball end mill for high hardness.
Suitable for finishing.

NS TOOL Co., Ltd.

NISSIN Carbide Endmill (알루미늄, DLC 코팅, AL3D-2 DLC, 위1.5, 모델 번호: AL3D 2DLC 1.5)

NS TOOL Co., Ltd.

니신 카바이드 엔드밀 (알루미늄, 롱 생크, 언더생크, AL-3 LS, 조5, 모델 번호 : AL3LS5)　AL-3LS 5

Achieves stable, high-efficiency machining under all conditions.
Stable machined surface accuracy is obtained in a wide range of areas, and vibration is suppressed even in high-speed machining.

NS TOOL Co., Ltd.

NISSIN Carbide Endmill (알루미늄, 4 배 블레이드 길이 유형, 모델 번호: AL4D 211)

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.2 XR 0.05 X 0.5)　MHRH230R 0.2XR0.05X0.5

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.2 XR 0.05 X1)　MHRH230R 0.2XR0.05X1

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.2 XR 0.05 X 1.5)　MHRH230R 0.2XR0.05X1.5

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.2 XR 0.05 X2)　MHRH230R 0.2XR0.05X2

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.3 XR 0.05 X1)　MHRH230R 0.3XR0.05X1

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.3 XR 0.05 X 1.5)　MHRH230R 0.3XR0.05X1.5

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.3 XR 0.05 X2)　MHRH230R 0.3XR0.05X2

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.3 XR 0.05 X 2.5)　MHRH230R 0.3XR0.05X2.5

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.3 XR 0.05 X3)　MHRH230R 0.3XR0.05X3

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.4 XR 0.05 X1)　MHRH230R 0.4XR0.05X1

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.4 XR 0.05 X2)　MHRH230R 0.4XR0.05X2

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.4 XR 0.05 X3)　MHRH230R 0.4XR0.05X3

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.4 XR 0.05 X4)　MHRH230R 0.4XR0.05X4

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.4 XR 0.1 X1)　MHRH230R 0.4XR0.1X1

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.4 XR 0.1 X2)　MHRH230R 0.4XR0.1X2

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.4 XR 0.1 X3)　MHRH230R 0.4XR0.1X3

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.4 XR 0.1 X4)　MHRH230R 0.4XR0.1X4

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.5 XR 0.05 X1)　MHRH230R 0.5XR0.05X1

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.5 XR 0.05 X2)　MHRH230R 0.5XR0.05X2

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.5 XR 0.05 X3)　MHRH230R 0.5XR0.05X3

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.5 XR 0.05 X4)　MHRH230R 0.5XR0.05X4

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.5 XR 0.05 X5)　MHRH230R 0.5XR0.05X5

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.5 XR 0.1 X1)　MHRH230R 0.5XR0.1X1

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.5 XR 0.1 X2)　MHRH230R 0.5XR0.1X2

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.5 XR 0.1 X3)　MHRH230R 0.5XR0.1X3

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.5 XR 0.1 X4)　MHRH230R 0.5XR0.1X4

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.5 XR 0.1 X5)　MHRH230R 0.5XR0.1X5

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.6 XR 0.05 X2)　MHRH230R 0.6XR0.05X2

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.6 XR 0.05 X4)　MHRH230R 0.6XR0.05X4

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.6 XR 0.05 X6)　MHRH230R 0.6XR0.05X6

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.

NS TOOL Co., Ltd.

NISSIN 탄화물 반지름 엔드밀(긴 목, 모델 번호: MHRH 230 R 0.6 XR 0.1 X2)　MHRH230R 0.6XR0.1X2

Infinite Coating Premium 2-Flute Long Neck Radius End Mill suitable for direct carving of high hardness materials.
Work material: tempered steel, quenched steel, titanium alloy.