Omikogyo Co., Ltd.

Baseboard Bit (Diameter pedang: 12,7 mm)　V46

By making two cuts in the opening corner of the baseboard at the joint of the wall and floor of the house with the baseboard bit, it is processed into a flat and safe shape with little peeling and chipping.
Work Material: Wood.

Omikogyo Co., Ltd.

Nick Bit (6mm)

Omikogyo Co., Ltd.

Carbide Drill Bit (Woodwork, Lurus, Φ6 Blade Panjang 20 x Total panjang 50mm)

Omikogyo Co., Ltd.

Carbide Drill Bit (Woodwork, Lurus, Φ3 Blade length 10 × Total panjang 35mm)

Omikogyo Co., Ltd.

V Groove Bit (Derajat, 6 x 90)　V90

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

U Groove Bit (Woodwork, 6 × 6R3)

Omikogyo Co., Ltd.

Drill Bit (Panel Struktur Flash, 1 tahap, 6 x 6)

Omikogyo Co., Ltd.

Bit (Panel Struktur Flash, Tip Karbide, 1 tahapan, 12 x 10)　1F1210

The part without the blade is the guide. Cut out along the base frame.
It can cut at about 20,000 ~ 30,000 revolutions per minute.

Omikogyo Co., Ltd.

Bit Sudut (Dengan Pemandu, Nomor Model: 30031)

STAR-M Corporation

Universal Awl (30 x 120 Untuk Drill Yang Dapat Diisi Ulang)

STAR-M Corporation

Carbide Universal Awl 30x120

TRUSCO NAKAYAMA CORPORATION

Lingkaran Cutter (Kerja Besi)

STAR-M Corporation

Lingkaran Bebas (30 x 120)

STAR-M Corporation

Awl Satu-Sentuh (60 x 200)

ISHIHASHI SEIKO

Rute 4.1　PRC4.1

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Rute 4.9　PRC4.9

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Rivet Cutter 6,5　PRC6.5

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Rivet Cutter 2.5 (3 buah)　3PRC2.5

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Rivet Cutter 3,3 (3 kepingan)　3PRC3.3

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Rivet Cutter 4.1 (3 kepingan)　3PRC4.1

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Rivet Cutter 4,2 (3 kepingan)　3PRC4.2

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Rivet Cutter 4,9 (3 kepingan)　3PRC4.9

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Rivet Cutter 5.0 (3 kepingan)　3PRC5.0

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Rivet Cutter 6,5 (3 kepingan)　3PRC6.5

With the independently developed double special point, it can be drilled lightly, well cut, and cleanly without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Spot Cutter TIN Bersalut 8.2 x 80 l　T-SPT8.2X80

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Spot Cutter TIN Bersalut 9.3 x 80 l　T-SPT9.3X80

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Spot Cutter TIN Bersalut 6.5 x 150 l　T-SPT6.5X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Spot Cutter TIN Bersalut 8.0 x 150 l　T-SPT8.0X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Spot Cutter TIN Bersalut 8.2 x 150 l　T-SPT8.2X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Spot Cutter TIN Bersalut 9.3 x 150 l　T-SPT9.3X150

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Spot Cutter TIN Bersalut 6.5 x 38 l　T-SPT6.5X38

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Spot Cutter TIN Bersalut 8.0 x 38 l　T-SPT8.0X38

Application: Spot welding removal of automotive steel sheets including high tensile steel sheets!
TIN coating has been applied to the carefully selected hiss material, and a small amount of cutting oil further extends the life.

ISHIHASHI SEIKO

Spot Cutter TA Bersalut (TIALN) 6.5 x 38 l　TA-SPT6.5X38

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Spot Cutter TA Bersalut (TIALN) 8.0 x 38 l　TA-SPT8.0X38

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Spot Cutter TA Bersalut (TIALN) 8.2 x 80 l　TA-SPT8.2X80

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Spot Cutter TA Bersalut (TIALN) 8.0 x 150 l　TA-SPT8.0X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Spot Cutter TA Bersalut (TIALN) 8.2 x 150 l　TA-SPT8.2X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Spot Cutter TA Bersalut (TIALN) 9.3 x 80 l　TA-SPT9.3X80

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Spot Cutter TA Bersalut (TIALN) 6.5 x 150 l　TA-SPT6.5X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.

ISHIHASHI SEIKO

Spot Cutter TA Bersalut (TIALN) 9.3 x 150 l　TA-SPT9.3X150

Approximately 3 times longer life than TIN coating and longer life than TICN.
Reduction in cutting and tool costs and increase in high production.