Omikogyo Co., Ltd.

Baseboard Bit (Diameter pedang: 12,7 mm)　V46

By making two cuts in the opening corner of the baseboard at the joint of the wall and floor of the house with the baseboard bit, it is processed into a flat and safe shape with little peeling and chipping.
Work Material: Wood.

Omikogyo Co., Ltd.

Nick Bit (6mm)

Omikogyo Co., Ltd.

Carbide Drill Bit (Woodwork, Lurus, Φ6 Blade Panjang 20 x Total panjang 50mm)

Omikogyo Co., Ltd.

Carbide Drill Bit (Woodwork, Lurus, Φ3 Blade length 10 × Total panjang 35mm)

Omikogyo Co., Ltd.

V Groove Bit (Derajat, 6 x 90)　V90

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

U Groove Bit (Woodwork, 6 × 6R3)

Omikogyo Co., Ltd.

Drill Bit (Panel Struktur Flash, 1 tahap, 6 x 6)

Omikogyo Co., Ltd.

Bit (Panel Struktur Flash, Tip Karbide, 1 tahapan, 12 x 10)　1F1210

The part without the blade is the guide. Cut out along the base frame.
It can cut at about 20,000 ~ 30,000 revolutions per minute.

Omikogyo Co., Ltd.

Bit Sudut (Dengan Pemandu, Nomor Model: 30031)

Omikogyo Co., Ltd.

Bit Pengklipan Bawah (Diameter pedang 10mm)

Omikogyo Co., Ltd.

Blok Groove Dapat Disesuaikan (3 hingga 15mm)　120G

It is OK to use one cutter from narrow groove to wide groove.
The number of blades is larger than that of a normal cutter, and the screw of the wooden mouth hardly comes out.

Omikogyo Co., Ltd.

Bit Woodwork (Carbide 1 Stage Flash bit, 2P, 6 x 6)　1F66

Suitable for cutting out one side of veneer, board, etc.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

Bit Kayu (Carbide 2 Stages Flash bit, 12 x 12)　2F1212

Cut out two boards such as a door in one shot.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

Bit Mengeruk (Karbide 2 Stages Flash bit, 6 x 6)　2F66

Cut out two boards such as a door in one shot.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

Bit Kayu (Cutter, 2D, 6 x 12)　A2D

Both male and female ant grooving can be done with one.
Cutting at about 20,000 ~ 30,000 revolutions per minute. Excellent sharpness, long life, and clean processing.

Omikogyo Co., Ltd.

Bit Sudut (Bentuk Bulat Sederhana 1.5)　B15

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit Sudut (Bentuk Bulat Sederhana 2.5)　B25

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit Lurus (Dengan Pemandu, 6 x 10 M15)　GM15

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit Lurus (Dengan Pemandu, 6 x 10 S6)　GS6

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit Sudut (Bit Pria)　HB

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit Kayu (Bit Kuat 1, 8 x 8)　K1F88

High rigidity high speed material is adopted for the base metal part, and it is also compatible with heavy cutting such as 2×4 window drawing.
The tip blade has a high speed blade, and the cutting blade has a super hard outer blade with good scrub, enabling faster work than conventional products.

Omikogyo Co., Ltd.

Bit Sudut (6 x 6.35)　KM635

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit Sudut (Chamfer 75, Φ18mm)　KM75

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit Sudut (DX Pemotongan Gabungan, 12 x 12)　MDX12

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit Sudut (Pemotongan Gabungan, Panjang 25)　ML25

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit Hasil Kayu (Carbide Lurus, 12 x 10)　S1210

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

Bit Kayu (Carbide Lurus, 12 x 12)　S1212

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

Bit Kayu (Carbide Lurus, 12 x 8)　S128

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

Bit Kayu (Karbide Lurus, 8 x 8)　S88

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

Bit Kayu (Bit Groove, 6 x 10 R5)　U610

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Excellent sharpness, long life, and clean processing.

Omikogyo Co., Ltd.

U Groove Bit (Woodwork, 6 × 8R4)　U68

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Excellent sharpness, long life, and clean processing.

Omikogyo Co., Ltd.

Penggaris Groove Dapat Disesuaikan (3 hingga 21)　W21G

It is OK to use one cutter from narrow groove to wide groove.
The number of blades is larger than that of a normal cutter, and the screw of the wooden mouth hardly comes out.

Omikogyo Co., Ltd.

Bit Sudut (Groove Sisi, 3 x 4.5)　YB3

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit Sudut (Groove Sisi, 6 x 8)　YB6

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.