Mitsubishi Materials Corporation

Carbide Drill (WSTAR, Internal Lubrication Type, Φ3 Blade length 21 × Total panjang 72)

Mitsubishi Materials Corporation

Carbide Drill (WSTAR, External Lubrication Type, Φ3 Blade length 16 × Total panjang 55)

Guhring Japan Corporation

Carbide Drill (Diameter kecil, Alumina Coating, Φ0.1 Blade length 1,2 × Total panjang 38mm)

Guhring Japan Corporation

Carbide Drill (Diameter kecil, Alumina Coating, Φ1.0 Blade length 10 × Total 38mm)

Guhring Japan Corporation

Carbide Drill (Diameter kecil, Alumina Coating, Φ2.0 Blade length 12 × Total panjang 38mm)

Iwata Tool Ltd.

GP Carbide Drill (ALT Coating, Short, Φ0.3 Blade length 1,8 x Total panjang 40mm)

Iwata Tool Ltd.

GP Carbide Drill (ALT Coating, Reguler, Φ0.3 Blade length 3,6 x Total panjang 40mm)

Omikogyo Co., Ltd.

Carbide Drill (Baja, Pendek, Tipe 3D, Tipe Lubriasi Eksternal, Φ3.0 Panjang 15 x Total panjang 52mm)

Omikogyo Co., Ltd.

Carbide Drill (Baja, Biasa, Tipe 5D, Internal Lubrication Type, Φ3.0 Blade length 21 × Total panjang 58mm)

MAPAL KK

Carbide Drill (MEGA-DRILL-180, Internal Lubrication Type, X5D, Panjang Blade Φ3.0 28 x Total panjang 66mm)

MAPAL KK

Carbide Drill (Tujuan Umum, SCD 350, Lubriasi Eksternal X4D, × Blade length 22 x Total panjang 62mm)

MAPAL KK

Carbide Drill (Tujuan Umum, SCD 351, Tipe Lubriasi Internal, X4D, × Blade length 22 x Total panjang 62mm)

MAPAL KK

Carbide Drill (MEGA-DRILL-Composite, SCD 250, External Lubrication, × Blade length 28 x Total panjang 66mm)

MAPAL KK

Carbide Drill (MEGA-DRILL-Composite, SCD 260, External Lubrication, × Blade length 28 x Total panjang 66mm)

MAPAL KK

Carbide Drill (MEGA-DRILL-Composite, SCD 271, Internal Lubrication, Φ6 Blade length 44 x Total panjang 82mm)

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,1 x 1)　MSDH 0.1X1

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,2 x 2)　MSDH 0.2X2

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,25 x 2,5)　MSDH 0.25X2.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,3 x 3)　MSDH 0.3X3

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,35 x 3,5)　MSDH 0.35X3.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,4 x 4)　MSDH 0.4X4

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,45 x 4,5)　MSDH 0.45X4.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Usaha Kecil, Ketahanan Tinggi, MSDH, 0,5 × 5)　MSDH 0.5X5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,55 x 5,5)　MSDH 0.55X5.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,6 x 6)　MSDH 0.6X6

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Kepedihan Kecil, Tinggi, MSDH, 0,65 x 6,5)　MSDH 0.65X6.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,7 x 7)　MSDH 0.7X7

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,75 x 7,5)　MSDH 0.75X7.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,8 x 8)　MSDH 0.8X8

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,85 x 8,5)　MSDH 0.85X8.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,9 x 9)　MSDH 0.9X9

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Pemrosesan Keparahan Kecil, MSDH, 0,95 x 9,5)　MSDH 0.95X9.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, dan Φ1 10)　MSDH 1X10

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.01 x 0.06)　NSMD-MS-0.01X0.06

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.015 x 0.09)　NSMD-MS-0.015X0.09

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.02 x 0,12)　NSMD-MS-0.02X0.12

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.025 x 0,15)　NSMD-MS-0.025X0.15

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.03 x 0.18)　NSMD-MS-0.03X0.18

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.035 x 0.24)　NSMD-MS-0.035X0.24

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.045 x 0.3)　NSMD-MS-0.045X0.3

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.