Kilang Mesin Pengeboran
Filter
- menurut grup Produk
- menurut Produk
Urutkan berdasar:
-
Mini Broach (Φ13.5 X Maximum Processing: 6 Berat 9 g
3 produk ditemukan
JPY: 2,920-
USD: 18.32-
-
Broach Tinggi (Tipe Sekali Sentuh, Φ17.5 X Maximum Processing Thickness: 25 Bobot 87 g)
22 produk ditemukan
JPY: 12,440-
USD: 78.03-
-
Jet Broach (Φ12.0 x Maximum Processing Thickness: 20 Bobot 86 g)
2 produk ditemukan
JPY: 10,340-
USD: 64.86-
-
Pilot Pin (Total panjang 192, Untuk Jet Broach 50 sampai 100mm [For 75 L]) NO12075
This is a pilot pin for a genuine Nitto Kohki brooch.
1 produk ditemukan
JPY: 14,820
USD: 92.96
-
Broach Holder (Total panjang 163, Untuk High Broach 14 sampai 35mm Jet Broach 17.5 sampai 40 mm)
3 produk ditemukan
JPY: 20,880-
USD: 130.98-
-
Metal Borer Mini Cutter (Φ11.5 X Maximum Processing Thickness: 6 Bobot 12 g)
8 produk ditemukan
JPY: 3,530-
USD: 22.14-
-
Metal Borer Mini M-Cutter (Φ11.5 Maksimum Memproses Ketebalan: 6 Bobot 12 g)
8 produk ditemukan
JPY: 3,530-
USD: 22.14-
-
Metal Borer Deltagon 200mmAL (Φ11.5 Maksimum Memproses Ketebalan: 20 Bobot 85 g)
5 produk ditemukan
JPY: 4,200-
USD: 26.35-
-
Batas Metal Deltagon 350 (Φ14.0 x Maximum Processing Thickness: 35 Bobot 65 g)
23 produk ditemukan
JPY: 7,320-
USD: 45.92-
-
Batas Metal Deltagon 350 (Φ18.0 x Maximum Processing Thickness: 50 Bobot 100g)
30 produk ditemukan
JPY: 6,780-
USD: 42.53-
-
Batas Metal Deltagon 350A (Φ14.0 x Maximum Processing Thickness: 35 Bobot 94 g)
24 produk ditemukan
JPY: 4,200-
USD: 26.35-
-
Deltagon Metal Borer 500A (Φ18.0 x Maximum Processing Thickness: 50 Bobot 120g)
27 produk ditemukan
JPY: 4,320-
USD: 27.10-
-
METACORE-MAX 25 (Tipe Satu-Sentuh, Φ11.5 Ketebalan Pemrosesan Maksimum: 25, Berat 68 g)
5 produk ditemukan
JPY: 1,650-
USD: 10.35-
-
METACORE-MAX 35 (Tipe Satu-Sentuh, Φ14.0 Ketebalan Pemrosesan Maksimum: 35, Berat 75 g)
37 produk ditemukan
JPY: 1,650-
USD: 10.35-
-
METACORE-MAX 50 (Tipe Satu-Sentuh, Φ17.5 Ketebalan Pemrosesan Maksimum: 50, Berat 87 g)
57 produk ditemukan
JPY: 1,650-
USD: 10.35-
-
HSS Cutter (25 SQ, 18.0 x Ketebalan Pemrosesan Maksimum: 25 Bobot 90g)
3 produk ditemukan
JPY: 10,440-
USD: 65.49-
-
Set Penekanan (Untuk 35 S, MT2)
2 produk ditemukan
JPY: 21,690-
USD: 136.06-
-
Crinkey Cutter (50 SQ, 51.0 x Ketebalan Pemrosesan Maksimum: 50 Bobot 300g)
10 produk ditemukan
JPY: 17,940-
USD: 112.53-
-
Crinkey Cutter (50 H, 17.5 x Ketebalan Pemrosesan Maksimum: 50 Bobot 100g)
27 produk ditemukan
JPY: 7,500-
USD: 47.05-
-
Peminjam Metal 500 18 MB50018
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 19 MB50019
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Logam 500 20 MB50020
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 21 MB50021
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 22 MB50022
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 23 MB50023
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 24 MB50024
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 25 MB50025
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 26 MB50026
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 27 MB50027
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 28 MB50028
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 29 MB50029
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 30 MB50030
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 10,070
USD: 63.17
-
Peminjam Metal 500 31 MB50031
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 11,200
USD: 70.26
-
Peminjam Metal 500 32 MB50032
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 11,200
USD: 70.26
-
Peminjam Metal 500 33 MB50033
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 11,200
USD: 70.26
-
Peminjam Metal 500 34 MB50034
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 11,200
USD: 70.26
-
Peminjam Metal 500 35 MB50035
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 11,200
USD: 70.26
-
Peminjam Metal 500 36 MB50036
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 12,900
USD: 80.92
-
Peminjam Metal 500 37 MB50037
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 12,900
USD: 80.92
-
Peminjam Metal 500 38 MB50038
By circumferential cutting, the cutting area is small, and the large diameter hole can be drilled by a small horsepower machine.
For drilling steel plates, mold steel, stainless steel, cast iron, etc. up to 50 mm thick.1 produk ditemukan
JPY: 12,900
USD: 80.92
