ISHIHASHI SEIKO

Cobalt HSS Lurus Drill (MASAMUNE, Φ1.0 Blade Panjang 18,5 x Total panjang 42,5mm, Blister Pack)

ISHIHASHI SEIKO

HSS Lurus (Ekstra MASAMUNE, Φ1.5 x Blade panjang 23.0 x Total panjang 48.5mm, Blister Pack)

ISHIHASHI SEIKO

Drill With Small diameter Tip Dril (Ultra MUSASHI, Φ2.5 Blade Panjang 35 x Total panjang 61mm, Blister Pack)

ISHIHASHI SEIKO

Set Lurus (13 Potongan, Φ1.5 ke pitchmm / 0.5mm)　D13-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Set Lurus (19 Potongan, Φ1.0 ke pitchmm / 0.5mm)　D19-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Set Lurus (25 Potongan, Φ1.0 ke pitchmm / 0.5mm)　D25-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Lurus Drill Set (100 Potongan, Φ1.0 kemm / 0.1mm pitch, kemm / 0.5mm,,,, mm)　D100-RS

Drill set for general drilling.
Work Material: Mild Steel, General Steel, Cast Iron, Light Alloy.

ISHIHASHI SEIKO

Drill Set (10 Bagian, Ekstra MASAMUNE, Φ3.0 ke pitchmm / 0.5mm)　EXD-10S

With cross-thinning at the tip, this drill set does not require a punch and cuts quickly.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Drill Set (15 Bagian, Ekstra MASAMUNE, Φ3.0 ke/0.5mm pitch)　EXD-15S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Drill Set (21 Bagian, Ekstra MASAMUNE, Φ3.0 ke/0.5mm pitch)　EXD-21S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Drill Set (100 Potongan, Ekstra MASAMUNE, Φ1.0 ke prinsipnyamm / 0.1mm, kemm / 0.5mm,,,mm)　EXD-100RS

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (13 potongan, MASAMUNE, Φ1.5 ke pitchmm / 0.5mm,mm)　COD-13S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
The sharpness does not affect hard-to-cut materials.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (19 kepingan, MASAMUNE, Φ1.0 ke pitchmm / 0.5mm)　COD-19S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (25 potongan, MASAMUNE, Φ1.0 ke pitchmm / 0.5mm)　COD-25S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (100 Pagar, MASAMUNE, Φ1.0 kemm / 0.1mm, kemm / 0.5mm,,,　COD-100RS

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Ketuk & Drilling Kobalt Set (21 Bagian, Ketuk: M3 sampai M12, Pilot Hole Drill: 2,5 hingga 10,3 mm)　COSSD-21

This is a set of spiral tap and downhole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt Jet Spiral Tap & Drill Set (21 Bagian, Ketuk: M3 sampai M12, Pilot Hole Drill: 2,5 hingga 10,3 mm)　COJSD-21

It is a set of jet tap, spiral tap and bottom hole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Ketuk & Telusuri Bagian (21 Bagian, Ekstra MASAMUNE, Ketuk: M3 sampai M12, Pilot Hole Drill: 2,5 hingga 10,3 mm)　SSD-21

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Ketuk & Telusuri Spiral Set (26 Bagian, M4, M5, M6, Drill Lubang Pilot: 3,4,4,3 mm 5,2)　ESD-26S

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Cobalt Jet Spiral Tap & Drill Set (21 Bagian, Ekstra MASAMUNE, Ketuk: M3 sampai M12, Pilot Hole Drill: 2,5 hingga 10,3 mm)　JSD-21

This is a set of jet tap, spiral tap and bottom hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Ketuk Tangan & Telusuri Set (21 Bagian, Ketuk: M3 sampai M12, Pilot Hole Drill: 2,5 hingga 10,3 mm)

ISHIHASHI SEIKO

HSS Drill (Sumbu Baik, MASAMUNE, tipe 6.5, 7.0 × Blade panjang 35 x Total panjang 75)

ISHIHASHI SEIKO

HSS Drill (Sumbu Baik, MASAMUNE, tipe 10, 11,0 × Blade panjang 50 x Total panjang 90)

ISHIHASHI SEIKO

HSS Drill (Sumbu Baik, MASAMUNE, 13, × Blade panjang 85 × Total panjang 140mm)

ISHIHASHI SEIKO

HSS Drill (Sumbu-Hx, MASAMUNE, 2.0 × Blade panjang 29 x Total panjang 80)

ISHIHASHI SEIKO

Set Penelusuran Tinggi (Sumbu-Hex, MASAMUNE, 5 Bagian, Φ2.0 ke 4.0mm (0.5mm)

ISHIHASHI SEIKO

Cobalt HSS Drill (Sumbu-Heks, MASAMUNE, 2,0 × Blade panjang 29 x Total panjang 80mm)

ISHIHASHI SEIKO

Spot Cutter HSS Drill (Sumbu-Heksa, Panjang Blade Φ6.5 24 x Total panjang 80mm)

ISHIHASHI SEIKO

Spot Cutter HSS Drill (Sumbu-Hex, Pencocokan TIN, Φ6.5 Panjang 24 x Total panjang 80mm)

ISHIHASHI SEIKO

Spot Cutter HSS Drill (Sumbu-Heksa, Lapisan TiAlN, Φ6.5 panjang 24 x Total panjang 80mm)

ISHIHASHI SEIKO

Ketuk Spiral (Alur Metrik, M3 x 0.50, Panjang Sekrup: 18, Presisi: H2)

ISHIHASHI SEIKO

Ketuk Leher Panjang (Alur Metrik, L: 100, M3 x 0.5, Panjang Sekrup: 11, Presisi: H2)

ISHIHASHI SEIKO

Ketuk Spiral (Alur Metrik, Baja Stainless, M2.0 x 0.40, Panjang Sekrup: 11, Presisi: H1)

ISHIHASHI SEIKO

Spiral Tap (Metrik Thread, Cobalt HSS untuk Hard-To-Cut Material, M3 x 0,50, Screw Length: 18, Presisi: H2)

ISHIHASHI SEIKO

Ketuk Baki (Ketuk Dengan Bor Utas Metrik, HSS, Melalui Lubang, M3 x 0.50, Panjang Sekrup: 5, Presisi:-)

ISHIHASHI SEIKO

Jet Power Tap (Metrik Thread) M2.0x0.40 Screw Length: 11 Akurasi: H1

ISHIHASHI SEIKO

Jet Power Tap (Whit Thread) W1/8 Screw Length: 18 Akurasi: H2

ISHIHASHI SEIKO

Jet Power Tap (Alur Metrik) Panjang leher M3x0.5 Panjang Sekrup: 11 Akurasi: Panjang H2: 100

ISHIHASHI SEIKO

Long Jet Power Tap (Metrik Thread) M3x0.50 Screw Length: 18 Akurasi: Panjang H2: 100

ISHIHASHI SEIKO

Jet Power Tap (Sekrup Terpadu) Tutup Alur Panjang Teks UNC1/4: Akurasi 24: H2