WIKA

WIKA Hydraulic Pressure Indicator 7082534, 4 → 20mA　7082534

Add-on Digital Display. Provides local readout for hydraulic transmitters. Universal programmability and simple mounting facilitate retrofit to pressure transmitters in use No additional power supply required Indicator range adjusted by flush mounted keys below front cover Logically structured menu guides operator through all necessary program steps by means of simple characters on the LCD display Damping facility available to ensure readability of value in cases of pulsation or pressure peaks Programmable parameters stored and preserved in event of power failure Integrated self-diagnosis circuit rupture Error message for sensor rupture Power consumption 4 to 20mA Sturdy and compact plastic case

WIKA

WIKA Bi-metal Thermometer 3723794　3723794

holder and pocket clip. Bimetal Thermometer. Bimetal thermometer from Wika. Ideally suited for use within heating facilities, hot water boilers and solar power systems. The stem of this thermometer is removable and comes with a set screw. General purpose industrial thermometer 63mm diameter Aluminium case, white dial with black markings and pointer Centre back connection

Stauff

Stauff Hydraulic Test Point SMK 20 R 1/4 VB, G 1/4 Male　SMK 20 R 1/4 VB

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Test Coupling SMK. Test point thread M16 x 2

Stauff

Stauff Hydraulic Test Point SMK 20 M12X1.5 VC, M12 x 1.5 Male　SMK 20 M12X1.5 VC

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Test Coupling SMK. Test point thread M16 x 2

Stauff

Stauff Hydraulic Test Point SMK 20 1/8 NPT VD, NPT 1/8 Male　SMK 20 1/8 NPT VD

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Test Coupling SMK. Test point thread M16 x 2

Stauff

Stauff Hydraulic Test Point SMK 20 1/4 NPT VD, NPT 1/4 Male　SMK 20 1/4 NPT VD

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Test Coupling SMK. Test point thread M16 x 2

Stauff

Stauff Hydraulic Test Point Hose SMS 20 1000A, Connection A M16 x 2, Connection B M16　SMS 20 1000A

For measuring with liquid pressure media, bleed before connecting tube. Protect from fire, sharp corners and hot objects. Test Hose SMS. Gauge adaptor and test hose allow remote monitoring of hydraulic systems Burst pressure 1100 bar 5mm hose outside diameter Minimum bend radius 20mm Pressure/temperature factor 122% (to 0°C), 110% (at 30°C), 100% (at 50°C), 86% (at 80°C), 77% (at 100°C)

Stauff

Stauff Hydraulic Test Point Hose SMS 20 2000A, Connection A M16 x 2, Connection B M16　SMS 20 2000A

For measuring with liquid pressure media, bleed before connecting tube. Protect from fire, sharp corners and hot objects. Test Hose SMS. Gauge adaptor and test hose allow remote monitoring of hydraulic systems Burst pressure 1100 bar 5mm hose outside diameter Minimum bend radius 20mm Pressure/temperature factor 122% (to 0°C), 110% (at 30°C), 100% (at 50°C), 86% (at 80°C), 77% (at 100°C)

Stauff

Stauff Hydraulic Test Point Hose SMS 20/M2000A, Connection A M16, Connection B G 1/4　SMS 20/M2000A

For measuring with liquid pressure media, bleed before connecting tube. Protect from fire, sharp corners and hot objects. Test Hose SMS. Gauge adaptor and test hose allow remote monitoring of hydraulic systems Burst pressure 1100 bar 5mm hose outside diameter Minimum bend radius 20mm Pressure/temperature factor 122% (to 0°C), 110% (at 30°C), 100% (at 50°C), 86% (at 80°C), 77% (at 100°C)

Stauff

Stauff Hydraulic Test Point Hose SMS 20/M 1/2" 1000A, Connection A M16, Connection B G 1/2　SMS 20/M 1/2" 1000A

For measuring with liquid pressure media, bleed before connecting tube. Protect from fire, sharp corners and hot objects. Test Hose SMS. Gauge adaptor and test hose allow remote monitoring of hydraulic systems Burst pressure 1100 bar 5mm hose outside diameter Minimum bend radius 20mm Pressure/temperature factor 122% (to 0°C), 110% (at 30°C), 100% (at 50°C), 86% (at 80°C), 77% (at 100°C)

Stauff

Stauff Hydraulic Pressure Test Kit SMK 1 KIT, 630bar　SMK 1 KIT

Pressure gauges are NOT supplied with this kit and must be ordered separately (see Analogue Pressure Gauges). SMK1 Test Kit 1. BSP and metric couplings Maximum pressure: 630 bar

Stauff

Stauff Hydraulic Pressure Test Kit SMK 3 KIT, 630bar　SMK 3 KIT

Pressure gauges are NOT supplied with this kit and must be ordered separately (see Analogue Pressure Gauges). SSMK3 Test Kit 3. BSP and metric couplings Maximum pressure: 630 bar

WIKA

WIKA Hydraulic Pressure Sensor 12719049, 4-Pin L-Plug, 4 → 20mA, 0bar to 1bar　12719049

May be used with Add-on Digital Display Stock No. ; 297-4852 297-4852 or Panel Mount Digital Indicator Stock No. 297-4830. Pressure Transmitters. Compact pressure transmitters ideally suited to hydraulic applications requiring intergrated pressure measurement Ranges up to 10bar use proven piezo resistive sensor elements Thin film strain gauge sensors used for ranges 25bar up to 600bar Electrical Output: 4 to 20mA 2 wire Accuracy: ;0.25% Limit Point Calibration ≤0.5% (BFSL) Construction 1.4571 stainless steel (wetted parts), 1.4301 stainless steel (housing)

WIKA

WIKA Hydraulic Pressure Sensor 12719251, 4-Pin L-Plug, 4 → 20mA, 0bar to 4bar　12719251

May be used with Add-on Digital Display Stock No. ; 297-4852 297-4852 or Panel Mount Digital Indicator Stock No. 297-4830. Pressure Transmitters. Compact pressure transmitters ideally suited to hydraulic applications requiring intergrated pressure measurement Ranges up to 10bar use proven piezo resistive sensor elements Thin film strain gauge sensors used for ranges 25bar up to 600bar Electrical Output: 4 to 20mA 2 wire Accuracy: ;0.25% Limit Point Calibration ≤0.5% (BFSL) Construction 1.4571 stainless steel (wetted parts), 1.4301 stainless steel (housing)

WIKA

WIKA Hydraulic Pressure Sensor 12719308, 4-Pin L-Plug, 4 → 20mA, 0bar to 25bar　12719308

May be used with Add-on Digital Display Stock No. ; 297-4852 297-4852 or Panel Mount Digital Indicator Stock No. 297-4830. Pressure Transmitters. Compact pressure transmitters ideally suited to hydraulic applications requiring intergrated pressure measurement Ranges up to 10bar use proven piezo resistive sensor elements Thin film strain gauge sensors used for ranges 25bar up to 600bar Electrical Output: 4 to 20mA 2 wire Accuracy: ;0.25% Limit Point Calibration ≤0.5% (BFSL) Construction 1.4571 stainless steel (wetted parts), 1.4301 stainless steel (housing)

WIKA

WIKA Hydraulic Pressure Sensor 12719332, 4-Pin L-Plug, 4 → 20mA, 0bar to 250bar　12719332

May be used with Add-on Digital Display Stock No. ; 297-4852 297-4852 or Panel Mount Digital Indicator Stock No. 297-4830. Pressure Transmitters. Compact pressure transmitters ideally suited to hydraulic applications requiring intergrated pressure measurement Ranges up to 10bar use proven piezo resistive sensor elements Thin film strain gauge sensors used for ranges 25bar up to 600bar Electrical Output: 4 to 20mA 2 wire Accuracy: ;0.25% Limit Point Calibration ≤0.5% (BFSL) Construction 1.4571 stainless steel (wetted parts), 1.4301 stainless steel (housing)

WIKA

WIKA Hydraulic Pressure Sensor 12719383, 4-Pin L-Plug, 4 → 20mA, 0bar to 100bar　12719383

May be used with Add-on Digital Display Stock No. ; 297-4852 297-4852 or Panel Mount Digital Indicator Stock No. 297-4830. Pressure Transmitters. Compact pressure transmitters ideally suited to hydraulic applications requiring intergrated pressure measurement Ranges up to 10bar use proven piezo resistive sensor elements Thin film strain gauge sensors used for ranges 25bar up to 600bar Electrical Output: 4 to 20mA 2 wire Accuracy: ;0.25% Limit Point Calibration ≤0.5% (BFSL) Construction 1.4571 stainless steel (wetted parts), 1.4301 stainless steel (housing)

WIKA

WIKA Hydraulic Pressure Sensor 12719375, 4-Pin L-Plug, 4 → 20mA, 0bar to 160bar　12719375

May be used with Add-on Digital Display Stock No. ; 297-4852 297-4852 or Panel Mount Digital Indicator Stock No. 297-4830. Pressure Transmitters. Compact pressure transmitters ideally suited to hydraulic applications requiring intergrated pressure measurement Ranges up to 10bar use proven piezo resistive sensor elements Thin film strain gauge sensors used for ranges 25bar up to 600bar Electrical Output: 4 to 20mA 2 wire Accuracy: ;0.25% Limit Point Calibration ≤0.5% (BFSL) Construction 1.4571 stainless steel (wetted parts), 1.4301 stainless steel (housing)

WIKA

WIKA Hydraulic Pressure Sensor 12719341, 4-Pin L-Plug, 4 → 20mA, 0bar to 400bar　12719341

May be used with Add-on Digital Display Stock No. ; 297-4852 297-4852 or Panel Mount Digital Indicator Stock No. 297-4830. Pressure Transmitters. Compact pressure transmitters ideally suited to hydraulic applications requiring intergrated pressure measurement Ranges up to 10bar use proven piezo resistive sensor elements Thin film strain gauge sensors used for ranges 25bar up to 600bar Electrical Output: 4 to 20mA 2 wire Accuracy: ;0.25% Limit Point Calibration ≤0.5% (BFSL) Construction 1.4571 stainless steel (wetted parts), 1.4301 stainless steel (housing)

WIKA

WIKA Hydraulic Pressure Sensor 12719367, 4-Pin L-Plug, 4 → 20mA, 0bar to 600bar　12719367

May be used with Add-on Digital Display Stock No. ; 297-4852 297-4852 or Panel Mount Digital Indicator Stock No. 297-4830. Pressure Transmitters. Compact pressure transmitters ideally suited to hydraulic applications requiring intergrated pressure measurement Ranges up to 10bar use proven piezo resistive sensor elements Thin film strain gauge sensors used for ranges 25bar up to 600bar Electrical Output: 4 to 20mA 2 wire Accuracy: ;0.25% Limit Point Calibration ≤0.5% (BFSL) Construction 1.4571 stainless steel (wetted parts), 1.4301 stainless steel (housing)

RS PRO

RS PRO Hydraulic Pressure Sensor, M2 (Din Plug), 5bar to 50bar　880-2283

F4 Series - Stainless Steel. Stainless steel adjustable pressure switches from RS. Available for both hydraulic and pneumatic applications, pressure switches supply an electrical signal once the system has reached a designated pressure. The switching pressure can be adjusted to suit various set points simply by rotating a screw in the centre of the pressure switch. Fitted with a mechanical stop to prevent damage from over pressurisation. Can be mounted in any orientation Accuracy 4% of set pressure Fixed Hysteresis 10-25% (Dependant upon version) DIN 43650 Electrical connection

RS PRO

RS PRO Hydraulic Pressure Sensor, M2 (Din Plug), 10bar to 100bar　880-2292

F4 Series - Stainless Steel. Stainless steel adjustable pressure switches from RS. Available for both hydraulic and pneumatic applications, pressure switches supply an electrical signal once the system has reached a designated pressure. The switching pressure can be adjusted to suit various set points simply by rotating a screw in the centre of the pressure switch. Fitted with a mechanical stop to prevent damage from over pressurisation. Can be mounted in any orientation Accuracy 4% of set pressure Fixed Hysteresis 10-25% (Dependant upon version) DIN 43650 Electrical connection

RS PRO

RS PRO Hydraulic Pressure Sensor, M2 (Din Plug), 20bar to 200bar　880-2295

F4 Series - Stainless Steel. Stainless steel adjustable pressure switches from RS. Available for both hydraulic and pneumatic applications, pressure switches supply an electrical signal once the system has reached a designated pressure. The switching pressure can be adjusted to suit various set points simply by rotating a screw in the centre of the pressure switch. Fitted with a mechanical stop to prevent damage from over pressurisation. Can be mounted in any orientation Accuracy 4% of set pressure Fixed Hysteresis 10-25% (Dependant upon version) DIN 43650 Electrical connection

Stauff

Stauff Hydraulic Test Point SMK 20 R 1/8 VC, R 1/8 Male　SMK 20 R 1/8 VC

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Test Coupling SMK. Test point thread M16 x 2

Stauff

Stauff Hydraulic Test Point SMK 20 R 3/8 VB, R 3/8 Male　SMK 20 R 3/8 VB

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Test Coupling SMK. Test point thread M16 x 2

Stauff

Stauff Hydraulic Test Point SMK 20 M10X1 VA, M10 x 1 Male　SMK 20 M10X1 VA

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Test Coupling SMK. Test point thread M16 x 2

Stauff

Stauff Hydraulic Test Point SMK 20 M14X1.5 VB, M14 x 1.5 Male　SMK 20 M14X1.5 VB

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Test Coupling SMK. Test point thread M16 x 2

Stauff

Stauff Hydraulic Test Point SMK 20 7/16 UNF VE, UNF 7/16 Male　SMK 20 7/16 UNF VE

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Test Coupling SMK. Test point thread M16 x 2

Stauff

Stauff Hydraulic Test Point SMK 20 R 1/4 VC A2 S/S, G 1/4 Male　SMK 20 R 1/4 VC A2 S/S

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Test Coupling SMK. Test point thread M16 x 2

Stauff

Stauff Inline Hydraulic Test Point, 1/4" M/F + SMK 20 R 1/8 VC ASS　1/4" M/F + SMK 20 R 1/8 VC ASS

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. BSP Inline 60° Test Point Adaptor. Test point thread M16 60º coned BSP male thread one end and female swivel nut on other end Allows in-line direct mounting between flexible hose assemblies or other suitably machined parts

Stauff

Stauff Inline Hydraulic Test Point, 3/8" M/F + SMK 20 R 1/8 VC ASS　3/8" M/F + SMK 20 R 1/8 VC ASS

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. BSP Inline 60° Test Point Adaptor. Test point thread M16 60º coned BSP male thread one end and female swivel nut on other end Allows in-line direct mounting between flexible hose assemblies or other suitably machined parts

Stauff

Stauff Inline Hydraulic Test Point, 1/2" M/F + SMK 20 R 1/8 VC ASS　1/2" M/F + SMK 20 R 1/8 VC ASS

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. BSP Inline 60° Test Point Adaptor. Test point thread M16 60º coned BSP male thread one end and female swivel nut on other end Allows in-line direct mounting between flexible hose assemblies or other suitably machined parts

Stauff

Stauff Inline Hydraulic Test Point, 3/4" M/F + SMK 20 R1/8 VC ASSM　3/4" M/F + SMK 20 R1/8 VC ASSM

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. BSP Inline 60° Test Point Adaptor. Test point thread M16 60º coned BSP male thread one end and female swivel nut on other end Allows in-line direct mounting between flexible hose assemblies or other suitably machined parts

Stauff

Stauff Hydraulic Test Point SSK 20 P, M16　SSK 20 P

It is essential that tube with an adequate wall thickness for the appropriate working pressures be used with these products and systems. Bulkhead Test Coupling Connection SSK. Often used in multi-point remote panel applications The long M16 male thread often used to connect test point hose to other test couplings or items some distance away Flexible hose can be fitted both sides of connector

WIKA

WIKA Hydraulic Pressure Sensor 12719260, 4-Pin L-Plug, 4 → 20mA, 0bar to 10bar　12719260

May be used with Add-on Digital Display Stock No. ; 297-4852 297-4852 or Panel Mount Digital Indicator Stock No. 297-4830. Pressure Transmitters. Compact pressure transmitters ideally suited to hydraulic applications requiring intergrated pressure measurement Ranges up to 10bar use proven piezo resistive sensor elements Thin film strain gauge sensors used for ranges 25bar up to 600bar Electrical Output: 4 to 20mA 2 wire Accuracy: ;0.25% Limit Point Calibration ≤0.5% (BFSL) Construction 1.4571 stainless steel (wetted parts), 1.4301 stainless steel (housing)

OMRON Corporation

IoT Liquid Flow Sensor Adapter R (Taper Thread) Supported Diameter 8A (1/4 ") for E8PC and others

Parker

［Discontinued］Hydraulic Test Point Hose Parker　S100-AC-AC-01.00

If you want to measure the pressure of the fluid, release some of the fluid before connecting the tubes.　Keep away from fire, sharp corners, and hot objects.
Test Point Microbore Flexible Hose

Parker

［Discontinued］Hydraulic Test Point Hose Parker　S100-AC-AC-02.00

If you want to measure the pressure of the fluid, release some of the fluid before connecting the tubes.　Keep away from fire, sharp corners, and hot objects.
Test Point Microbore Flexible Hose

Parker

［Discontinued］Hydraulic Pressure Sensor Parker Maximum Pressure 25 bar　PTDVB0251B1C2

ASIC Performer Transducers
A compact high-stability, low-drift pressure transducer available with micro M12, DIN

Parker

［Discontinued］Hydraulic Pressure Sensor Parker Maximum Pressure 400 bar　PTDVB4001B1C2

ASIC Performer Transducers
A compact high-stability, low-drift pressure transducer available with micro M12, DIN