Hydraulic Cylinders, Pumps & Power Units
Filters
-
RS PRO Hydraulic Hand Pump 672-419
Barrel Pump
2 types of barrel pump for 40 gallon metal drum that can be pumped up to the viscosity of Hypoid 90 Lever Action Pump (RS); 672-425 672-425) is equipped with a 84 cm plated steel suction tube and an additional optional rotary action pump (RS; 672-419 672-419) is equipped with a 96 cm steel suction tube and comes with an M24 x 4 mm retention adapter1 products found
JPY: 28,000
USD: 174.22
-
RS PRO Hydraulic Hand Pump 672-425
Barrel Pump
2 types of barrel pump for 40 gallon metal drum that can be pumped up to the viscosity of Hypoid 90 Lever Action Pump (RS); 672-425 672-425) is equipped with a 84 cm plated steel suction tube and an additional optional rotary action pump (RS; 672-419 672-419) is equipped with a 96 cm steel suction tube and comes with an M24 x 4 mm retention adapter1 products found
JPY: 21,600
USD: 134.40
-
RS PRO 80030, Hydraulic Hand Pump 809-009
Efflux Pump
Heavy Duty Pistonless Efflux Pump Made of Polyethylene, Efflux Set with Lower Stroke Contents: Dropletproof Nozzle, Screw Adapter for 12 mm Diameter Hose, Multi-Adapter for Convex Screw Neck Seal, Adapter for Clamping with Internal Screw of Standard Plastic Drum, Self-Suction Type of Intractable Immersion Tube Compatible with 20~210 L Drum, Efflux of 250 ml in 1 Stroke1 products found
JPY: 21,400
USD: 133.15
-
Parker Hydraulic Gear Pump, 8cm³ 3349111091
Constant Discharge Rate Gear Pump, 1:8 Thinly Sliced Shaft
The Parker PGP/PGM 500 series gear pump is a product that enhances the performance of the "bushing block" type pumps that are widely used internationally. The PGP/PGM 500 series pumps combine superior performance under high operating pressure, high efficiency, and low noise. A wide range of standard options are available to meet specific needs around the world.1 products found
JPY: 115,000
USD: 715.53
-
Norgren Rod End Bearing QM/8025/32 QM/8025/32
PRA VDMA Spherical Rod End Bearing
1 products found
JPY: 7,170
USD: 44.61
-
Norgren Rod End Bearing QM/8040/32 QM/8040/32
PRA VDMA Spherical Rod End Bearing
1 products found
JPY: 8,950
USD: 55.69
-
Norgren Rod End Bearing QM/8050/32 QM/8050/32
PRA VDMA Spherical Rod End Bearing
1 products found
JPY: 14,300
USD: 88.98
-
Hi-Force Single, Portable Low Height Hydraulic Cylinder, HVL10, 10t, 6mm stroke HVL10
Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories. Very Low Height Cylinders. Very low height cylinders combine minimum closed height with maximum stroke to provide a short adjusting and lifting force in very confined work areas All cylinders have a 6mm stroke and are manufactured to the same high standards as our existing range of cylinders
1 products found
JPY: 102,000
USD: 634.64
-
Hi-Force Single, Portable Low Height Hydraulic Cylinder, HVL30, 32t, 6mm stroke HVL30
Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories. Very Low Height Cylinders. Very low height cylinders combine minimum closed height with maximum stroke to provide a short adjusting and lifting force in very confined work areas All cylinders have a 6mm stroke and are manufactured to the same high standards as our existing range of cylinders
1 products found
JPY: 159,000
USD: 989.30
-
Bosch Rexroth Fixed Hydraulic Cylinder 2952993400 2952993400
Cleanliness - Maximum degree of contamination of the hydraulic fluid to NAS 1638 class 10. In order to achieve a longer service life, we recommend use of a filtration element with a minimum retention rate of B ;sub>10 ;/sub> ≥ 75. 32-63mm Bore Hydraulic Cylinders. Carbon steel body Recommended hydraulic medium: Mineral oil based fluids NBR (Nitrile)/Polyurethane seals 240 bar Static Proof Pressure Hydraulic fluid operating temperature range: -20 to +80°C 160 bar working pressure
1 products found
JPY: 129,000
USD: 802.64
-
Bosch Rexroth Rod End Bearing R900323332 R900323332
Cleanliness - Maximum degree of contamination of the hydraulic fluid to NAS 1638 class 10. In order to achieve a longer service life, we recommend use of a filtration element with a minimum retention rate of B ;sub>10 ;/sub> ≥ 75. Rod End Bearings. Male thread version for hydraulic cylinder with 32mm bore Female thread version for hydraulic cylinder with 40mm to 63mm bore
1 products found
JPY: 32,600
USD: 202.84
-
Enerpac Single, Portable General Purpose Hydraulic Cylinder, RC50, 5t, 16mm stroke RC50
Cylinder RC50 (stock no. ; 283-0780 283-0780 ) has a non-removable grooved saddle and no collar thread. All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2kg. Single-Acting, General Purpose. Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation. Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position. Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example: ; 283-0954 283-0954 for 10 t Enerpac units).
1 products found
JPY: 120,000
USD: 746.64
-
Enerpac Single, Portable General Purpose Hydraulic Cylinder, RC51, 5t, 25mm stroke RC51
Cylinder RC50 (stock no. ; 283-0780 283-0780 ) has a non-removable grooved saddle and no collar thread. All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2kg. Single-Acting, General Purpose. Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation. Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position. Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example: ; 283-0954 283-0954 for 10 t Enerpac units).
1 products found
JPY: 92,100
USD: 573.05
-
Enerpac Single, Portable General Purpose Hydraulic Cylinder, RC53, 5t, 76mm stroke RC53
Cylinder RC50 (stock no. ; 283-0780 283-0780 ) has a non-removable grooved saddle and no collar thread. All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2kg. Single-Acting, General Purpose. Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation. Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position. Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example: ; 283-0954 283-0954 for 10 t Enerpac units).
1 products found
JPY: 103,000
USD: 640.87
-
Enerpac Single, Portable General Purpose Hydraulic Cylinder, RC55, 5t, 127mm stroke RC55
Cylinder RC50 (stock no. ; 283-0780 283-0780 ) has a non-removable grooved saddle and no collar thread. All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2kg. Single-Acting, General Purpose. Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation. Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position. Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example: ; 283-0954 283-0954 for 10 t Enerpac units).
1 products found
JPY: 167,000
USD: 1,039.07
-
Enerpac Single, Portable General Purpose Hydraulic Cylinder, RC102, 10t, 54mm stroke RC102
Cylinder RC50 (stock no. ; 283-0780 283-0780 ) has a non-removable grooved saddle and no collar thread. All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2kg. Single-Acting, General Purpose. Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation. Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position. Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example: ; 283-0954 283-0954 for 10 t Enerpac units).
1 products found
JPY: 157,000
USD: 976.85
-
Enerpac Single, Portable General Purpose Hydraulic Cylinder, RC104, 10t, 105mm stroke RC104
Cylinder RC50 (stock no. ; 283-0780 283-0780 ) has a non-removable grooved saddle and no collar thread. All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2kg. Single-Acting, General Purpose. Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation. Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position. Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example: ; 283-0954 283-0954 for 10 t Enerpac units).
1 products found
JPY: 119,000
USD: 740.42
-
Enerpac Single, Portable Low Height Hydraulic Cylinder, RSM50, 5t, 6mm stroke RSM50
All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2Kg. Flat - Low Height Cyllinders. Compact, flat profile, RSM-Flat Jac ® spring return cylinders designed for use in extremely confined working spaces where most other cylinders will not fit Mounting holes permit easy fixing Grooved plunger end requires no saddle Replacement seal kits are available
1 products found
JPY: 115,000
USD: 715.53
-
Enerpac Single, Portable Low Height Hydraulic Cylinder, RSM200, 20t, 11mm stroke RSM200
All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2Kg. Flat - Low Height Cyllinders. Compact, flat profile, RSM-Flat Jac ® spring return cylinders designed for use in extremely confined working spaces where most other cylinders will not fit Mounting holes permit easy fixing Grooved plunger end requires no saddle Replacement seal kits are available
1 products found
JPY: 133,000
USD: 827.53
-
Enerpac Single, Portable Low Height Hydraulic Cylinder, RSM300, 30t, 13mm stroke RSM300
All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2Kg. Flat - Low Height Cyllinders. Compact, flat profile, RSM-Flat Jac ® spring return cylinders designed for use in extremely confined working spaces where most other cylinders will not fit Mounting holes permit easy fixing Grooved plunger end requires no saddle Replacement seal kits are available
1 products found
JPY: 170,000
USD: 1,057.74
-
Enerpac Single, Portable Low Height Hydraulic Cylinder, RCS101, 10t, 38mm stroke RCS101
All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2Kg. Low Height. Lightweight, low profile spring return cylinders designed for use in confined spaces Piston wiper reduces contamination, extending cylinder life
1 products found
JPY: 150,000
USD: 933.30
-
Enerpac Single, Portable Low Height Hydraulic Cylinder, RSM100, 10t, 12mm stroke RSM100
All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2Kg. Flat - Low Height Cyllinders. Compact, flat profile, RSM-Flat Jac ® spring return cylinders designed for use in extremely confined working spaces where most other cylinders will not fit Mounting holes permit easy fixing Grooved plunger end requires no saddle Replacement seal kits are available
1 products found
JPY: 101,000
USD: 628.42
-
Norgren Rod End Bearing QM/8080/32 QM/8080/32
PRA VDMA Spherical Rod End Bearing
1 products found
JPY: 18,000
USD: 112.00
-
Bosch Rexroth Hydraulic Gear Pump 0510225006, 4cm3 510225006
Instruction leaflet. Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B ;sub>20 ;/sub> ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B ;sub>10 ;/sub>≥100. Self Aspirating External Gear Pump, 1:5 Tapered Shaft. Plain bearings cater for high load applications To assist with installation, a range of flanged fittings for pipe connection is available separately, in right angle pattern Each fitting is supplied complete with fixing screws, 0-ring, cutting ring and retaining nut
1 products found
JPY: 69,600
USD: 433.05
-
Bosch Rexroth Hydraulic Gear Pump 0510425022, 8.2cm3 510425022
Instruction leaflet. Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B ;sub>20 ;/sub> ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B ;sub>10 ;/sub>≥100. Self Aspirating External Gear Pump, 1:5 Tapered Shaft. Plain bearings cater for high load applications To assist with installation, a range of flanged fittings for pipe connection is available separately, in right angle pattern Each fitting is supplied complete with fixing screws, 0-ring, cutting ring and retaining nut
1 products found
JPY: 65,000
USD: 404.43
-
Bosch Rexroth Hydraulic Gear Pump 0510525022, 11cm³ 510525022
Instruction leaflet. Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B ;sub>20 ;/sub> ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B ;sub>10 ;/sub>≥100. Self Aspirating External Gear Pump, 1:5 Tapered Shaft. Plain bearings cater for high load applications To assist with installation, a range of flanged fittings for pipe connection is available separately, in right angle pattern Each fitting is supplied complete with fixing screws, 0-ring, cutting ring and retaining nut
1 products found
JPY: 67,600
USD: 420.61
-
Bosch Rexroth Hydraulic Gear Pump 0510725030, 22.5cm³ 510725030
Instruction leaflet. Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B ;sub>20 ;/sub> ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B ;sub>10 ;/sub>≥100. Self Aspirating External Gear Pump, 1:5 Tapered Shaft. Plain bearings cater for high load applications To assist with installation, a range of flanged fittings for pipe connection is available separately, in right angle pattern Each fitting is supplied complete with fixing screws, 0-ring, cutting ring and retaining nut
1 products found
JPY: 74,400
USD: 462.92
-
Bosch Rexroth Hydraulic Gear Pump 0510225022, 4cm³ 510225022
Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B ;sub>20 ;/sub> ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B ;sub>10 ;/sub>≥100. Self Aspirating External Gear Pump, 1:8 Tapered Shaft. New principle for the housing sealing, giving long housing service life Long service life for seals, even at maximum temperature Plain bearing for high loads Monoblock bearing Simple and robust design New principle of hydrostatic side clearance compensation
1 products found
JPY: 79,700
USD: 495.89
-
Bosch Rexroth Hydraulic Gear Pump 0510425043, 8cm³ 510425043
Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B ;sub>20 ;/sub> ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B ;sub>10 ;/sub>≥100. Self Aspirating External Gear Pump, 1:8 Tapered Shaft. New principle for the housing sealing, giving long housing service life Long service life for seals, even at maximum temperature Plain bearing for high loads Monoblock bearing Simple and robust design New principle of hydrostatic side clearance compensation
1 products found
JPY: 67,300
USD: 418.74
-
Bosch Rexroth Hydraulic Gear Pump 0510525074, 11cm³ 510525074
Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B ;sub>20 ;/sub> ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B ;sub>10 ;/sub>≥100. Self Aspirating External Gear Pump, 1:8 Tapered Shaft. New principle for the housing sealing, giving long housing service life Long service life for seals, even at maximum temperature Plain bearing for high loads Monoblock bearing Simple and robust design New principle of hydrostatic side clearance compensation
1 products found
JPY: 75,700
USD: 471.01
-
Bosch Rexroth Hydraulic Gear Pump 0510725112, 22.5cm³ 510725112
Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B ;sub>20 ;/sub> ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B ;sub>10 ;/sub>≥100. Self Aspirating External Gear Pump, 1:8 Tapered Shaft. New principle for the housing sealing, giving long housing service life Long service life for seals, even at maximum temperature Plain bearing for high loads Monoblock bearing Simple and robust design New principle of hydrostatic side clearance compensation
1 products found
JPY: 98,500
USD: 612.87
-
Bosch Rexroth Fixed Hydraulic Cylinder R987155264 R987155264
Cleanliness - Maximum degree of contamination of the hydraulic fluid to NAS 1638 class 10. In order to achieve a longer service life, we recommend use of a filtration element with a minimum retention rate of B ;sub>10 ;/sub> ≥ 75. 32-63mm Bore Hydraulic Cylinders. Carbon steel body Recommended hydraulic medium: Mineral oil based fluids NBR (Nitrile)/Polyurethane seals 240 bar Static Proof Pressure Hydraulic fluid operating temperature range: -20 to +80°C 160 bar working pressure
1 products found
JPY: 137,000
USD: 852.41
-
Bosch Rexroth Fixed Hydraulic Cylinder R987155269 R987155269
Cleanliness - Maximum degree of contamination of the hydraulic fluid to NAS 1638 class 10. In order to achieve a longer service life, we recommend use of a filtration element with a minimum retention rate of B ;sub>10 ;/sub> ≥ 75. 32-63mm Bore Hydraulic Cylinders. Carbon steel body Recommended hydraulic medium: Mineral oil based fluids NBR (Nitrile)/Polyurethane seals 240 bar Static Proof Pressure Hydraulic fluid operating temperature range: -20 to +80°C 160 bar working pressure
1 products found
JPY: 171,000
USD: 1,063.96
-
Enerpac Single, Portable General Purpose Hydraulic Cylinder, RC106, 10t, 156mm stroke RC106
Cylinder RC50 (stock no. ; 283-0780 283-0780 ) has a non-removable grooved saddle and no collar thread. All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2kg. Single-Acting, General Purpose. Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation. Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position. Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example: ; 283-0954 283-0954 for 10 t Enerpac units).
1 products found
JPY: 192,000
USD: 1,194.62
-
Enerpac Single, Portable General Purpose Hydraulic Cylinder, RC1010, 10t, 257mm stroke RC1010
Cylinder RC50 (stock no. ; 283-0780 283-0780 ) has a non-removable grooved saddle and no collar thread. All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2kg. Single-Acting, General Purpose. Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation. Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position. Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example: ; 283-0954 283-0954 for 10 t Enerpac units).
1 products found
JPY: 237,000
USD: 1,474.61
-
Enerpac Single, Portable Low Height Hydraulic Cylinder, RCS201, 20t, 45mm stroke RCS201
All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2Kg. Low Height. Lightweight, low profile spring return cylinders designed for use in confined spaces Piston wiper reduces contamination, extending cylinder life
1 products found
JPY: 194,000
USD: 1,207.07
-
Enerpac Single, Portable Low Height Hydraulic Cylinder, RCS302, 30t, 62mm stroke RCS302
All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2Kg. Low Height. Lightweight, low profile spring return cylinders designed for use in confined spaces Piston wiper reduces contamination, extending cylinder life
1 products found
JPY: 251,000
USD: 1,561.72
-
Enerpac Single, Portable Low Height Hydraulic Cylinder, RCS502, 50t, 60mm stroke RCS502
All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2Kg. Low Height. Lightweight, low profile spring return cylinders designed for use in confined spaces Piston wiper reduces contamination, extending cylinder life
1 products found
JPY: 322,000
USD: 2,003.48
-
Enerpac Single, Portable Hollow Plunger Hydraulic Cylinders, RCH123, 12t, 76mm stroke RCH123
Cylinders stock no's ; 365-0002 365-0002 and ; 283-1137 283-1137 have a non-removable saddle and no plunger internal thread. All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2Kg. Hollow. Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top bearing and heavy-duty return springs enable fast piston retraction. Port connections on all cylinders are 3/8-18 NPT and are fitted with a female high flow coupler. Enerpac cylinders are designed to ANSI B30.1 and have a maximum operating pressure of 700 bar.
1 products found
JPY: 311,000
USD: 1,935.04
-
Enerpac Single, Portable Hollow Plunger Hydraulic Cylinders, RCH202, 20T, 49mm stroke RCH202
Cylinders stock no's ; 365-0002 365-0002 and ; 283-1137 283-1137 have a non-removable saddle and no plunger internal thread. All cylinder capacities are specified in US ton (short ton). 1 US ton : 907.2Kg. Hollow. Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top bearing and heavy-duty return springs enable fast piston retraction. Port connections on all cylinders are 3/8-18 NPT and are fitted with a female high flow coupler. Enerpac cylinders are designed to ANSI B30.1 and have a maximum operating pressure of 700 bar.
1 products found
JPY: 249,000
USD: 1,549.28
