Power Transmission - Gears
Filters
- by Product group
- by Product
Sort by:
-
RS PRO 1.5 Plastic Gear Rack, 2000mm Long , 6.5mm Face Width 122-3443
1 fixing kit consists of 10 M4 screws and 10 plates.
; 1223443 1223443 1.5 Flexible rack for modules; 1223444 1223444 2.0 Flexible rack for modules; 1223445 1223445 1.5 Aluminum Rail for Modules; 1223446 1223446 2.0 Aluminum Rail for Modules; 1223447 1223447 1.5/2.0 Module Fixing Kit • Dell Ring Gear Rack • RS Pro Flexible Metric Rack. It consists of a duracon, an aluminum fixing rail, a crimping plate, and screws (sold separately). This rack can be mounted directly on the desired surface or with aluminum retaining rails.1 products found
JPY: 76,200
USD: 477.98
-
RS PRO 2 Plastic Gear Rack, 2000mm Long , 8mm Face Width 122-3444
1 fixing kit consists of 10 M4 screws and 10 plates.
; 1223443 1223443 1.5 Flexible rack for modules; 1223444 1223444 2.0 Flexible rack for modules; 1223445 1223445 1.5 Aluminum Rail for Modules; 1223446 1223446 2.0 Aluminum Rail for Modules; 1223447 1223447 1.5/2.0 Module Fixing Kit • Dell Ring Gear Rack • RS Pro Flexible Metric Rack. It consists of a duracon, an aluminum fixing rail, a crimping plate, and screws (sold separately). This rack can be mounted directly on the desired surface or with aluminum retaining rails.1 products found
JPY: 93,500
USD: 586.50
-
RS PRO Aluminium Gear Rack 122-3445
1 fixing kit consists of 10 M4 screws and 10 plates.
; 1223443 1223443 1.5 Flexible rack for modules; 1223444 1223444 2.0 Flexible rack for modules; 1223445 1223445 1.5 Aluminum Rail for Modules; 1223446 1223446 2.0 Aluminum Rail for Modules; 1223447 1223447 1.5/2.0 Module Fixing Kit • Dell Ring Gear Rack • RS Pro Flexible Metric Rack. It consists of a duracon, an aluminum fixing rail, a crimping plate, and screws (sold separately). This rack can be mounted directly on the desired surface or with aluminum retaining rails.1 products found
JPY: 22,900
USD: 143.65
-
RS PRO Aluminium Gear Rack Rail, 1000mm Long 122-3446
1 fixing kit consists of 10 M4 screws and 10 plates.
; 1223443 1223443 1.5 Flexible rack for modules; 1223444 1223444 2.0 Flexible rack for modules; 1223445 1223445 1.5 Aluminum Rail for Modules; 1223446 1223446 2.0 Aluminum Rail for Modules; 1223447 1223447 1.5/2.0 Module Fixing Kit • Dell Ring Gear Rack • RS Pro Flexible Metric Rack. It consists of a duracon, an aluminum fixing rail, a crimping plate, and screws (sold separately). This rack can be mounted directly on the desired surface or with aluminum retaining rails.1 products found
JPY: 30,500
USD: 191.32
-
RS PRO Aluminium Gear Rack Rail Fixing Kit, 11.4mm Long 122-3447
1 fixing kit consists of 10 M4 screws and 10 plates.
; 1223443 1223443 1.5 Flexible rack for modules; 1223444 1223444 2.0 Flexible rack for modules; 1223445 1223445 1.5 Aluminum Rail for Modules; 1223446 1223446 2.0 Aluminum Rail for Modules; 1223447 1223447 1.5/2.0 Module Fixing Kit • Dell Ring Gear Rack • RS Pro Flexible Metric Rack. It consists of a duracon, an aluminum fixing rail, a crimping plate, and screws (sold separately). This rack can be mounted directly on the desired surface or with aluminum retaining rails.1 products found
JPY: 9,180
USD: 57.58
-
RS PRO Steel 16 Teeth Mitre Gear, 45° Pitch , 20° Angle , 4mm Bore 521-5780
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 4,890
USD: 30.67
-
RS PRO Steel 24 Teeth Mitre Gear, 45° Pitch , 20° Angle , 5mm Bore 521-5803
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 4,050
USD: 25.41
-
RS PRO Steel 25 Teeth Mitre Gear, 45° Pitch , 20° Angle , 6mm Bore 521-5819
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 4,880
USD: 30.61
-
RS PRO Steel 30 Teeth Mitre Gear, 45° Pitch , 20° Angle , 5mm Bore 521-5825
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 5,850
USD: 36.70
-
RS PRO Steel 16 Teeth Mitre Gear, 45° Pitch , 20° Angle , 8mm Bore 521-5831
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 3,640
USD: 22.83
-
RS PRO Steel 20 Teeth Mitre Gear, 45° Pitch , 20° Angle , 8mm Bore 521-5847
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 4,620
USD: 28.98
-
RS PRO Steel 25 Teeth Mitre Gear, 45° Pitch , 20° Angle , 10mm Bore 521-5869
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 5,960
USD: 37.39
-
RS PRO Steel 30 Teeth Mitre Gear, 45° Pitch , 20° Angle , 12mm Bore 521-5875
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 7,080
USD: 44.41
-
RS PRO Steel 16 Teeth Mitre Gear, 45° Pitch , 20° Angle , 8mm Bore 521-5881
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 4,180
USD: 26.22
-
RS PRO Steel 20 Teeth Mitre Gear, 45° Pitch , 20° Angle , 12mm Bore 521-5897
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 5,370
USD: 33.69
-
RS PRO Steel 25 Teeth Mitre Gear, 45° Pitch , 20° Angle , 12mm Bore 521-5904
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 7,200
USD: 45.16
-
RS PRO Steel 30 Teeth Mitre Gear, 45° Pitch , 20° Angle , 12mm Bore 521-5926
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 10,500
USD: 65.86
-
RS PRO Steel 16 Teeth Mitre Gear, 45° Pitch , 20° Angle , 12mm Bore 521-5932
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 5,730
USD: 35.94
-
RS PRO Steel 20 Teeth Mitre Gear, 45° Pitch , 20° Angle , 14mm Bore 521-5948
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 7,180
USD: 45.04
-
RS PRO Steel 25 Teeth Mitre Gear, 45° Pitch , 20° Angle , 14mm Bore 521-5954
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 8,740
USD: 54.82
-
RS Pro Steel 30 Teeth Mitre Gear, 45° Pitch , 20° Angle , 16mm Bore 521-5960
All mitre gears are supplied as single units (i.e. not as a pair). Metric Mitre Gears Steel. A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 45° pitch angle, 48° face angle
1 products found
JPY: 12,700
USD: 79.66
-
RS PRO Steel 15 Teeth Bevel Gear, 45° Pitch , 20° Angle , 6mm Bore 521-5976
All mitre gears are supplied as single units (i.e. not as a pair). Metric Bevel Gears Steel. A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 20° pressure angle
1 products found
JPY: 1,930
USD: 12.11
-
RS PRO Steel 30 Teeth Bevel Gear, 45° Pitch , 20° Angle , 8mm Bore 521-5982
All mitre gears are supplied as single units (i.e. not as a pair). Metric Bevel Gears Steel. A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 20° pressure angle
1 products found
JPY: 7,090
USD: 44.47
-
RS PRO Steel 15 Teeth Bevel Gear, 45° Pitch , 20° Angle , 8mm Bore 521-5998
All mitre gears are supplied as single units (i.e. not as a pair). Metric Bevel Gears Steel. A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 20° pressure angle
1 products found
JPY: 5,450
USD: 34.19
-
RS PRO Steel 30 Teeth Bevel Gear, 45° Pitch , 20° Angle , 10mm Bore 521-6008
All mitre gears are supplied as single units (i.e. not as a pair). Metric Bevel Gears Steel. A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 20° pressure angle
1 products found
JPY: 8,190
USD: 51.37
-
RS PRO Steel 15 Teeth Bevel Gear, 45° Pitch , 20° Angle , 12mm Bore 521-6014
All mitre gears are supplied as single units (i.e. not as a pair). Metric Bevel Gears Steel. A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 20° pressure angle
1 products found
JPY: 6,700
USD: 42.03
-
RS PRO Steel 30 Teeth Bevel Gear, 45° Pitch , 20° Angle , 16mm Bore 521-6020
All mitre gears are supplied as single units (i.e. not as a pair). Metric Bevel Gears Steel. A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finish Tensile strength (min) 569 N/mm² 20° pressure angle
1 products found
JPY: 10,100
USD: 63.36
-
RS PRO POM 40 Teeth Bevel Gear, 26 (Gear) °, 26 (Pinion) °, 34 (Pinion) °, 63 (Gear) ° Pitch , 30° 29' (Pinion), 65° 521-6070
Gears sold as a single unit, match pair with module size to give a 2:1 ratio. Delrin Bevel Gears. Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm ;sup>2 ;/sup> Hardness (Rockwell R) 110-120 Pitch angle 63° 26' (gear) 26° 34' (pinion) Face angle 65° 36' (gear) 30° 29' (pinion)
1 products found
JPY: 1,160
USD: 7.28
-
RS PRO POM 20 Teeth Bevel Gear, 26 (Gear) °, 26 (Pinion) °, 34 (Pinion) °, 63 (Gear) ° Pitch , 30° 29' (Pinion), 65° 521-6092
Gears sold as a single unit, match pair with module size to give a 2:1 ratio. Delrin Bevel Gears. Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm ;sup>2 ;/sup> Hardness (Rockwell R) 110-120 Pitch angle 63° 26' (gear) 26° 34' (pinion) Face angle 65° 36' (gear) 30° 29' (pinion)
1 products found
JPY: 910
USD: 5.71
-
RS PRO POM 40 Teeth Bevel Gear, 26 (Gear) °, 26 (Pinion) °, 34 (Pinion) °, 63 (Gear) ° Pitch , 30° 29' (Pinion), 65° 521-6121
Gears sold as a single unit, match pair with module size to give a 2:1 ratio. Delrin Bevel Gears. Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm ;sup>2 ;/sup> Hardness (Rockwell R) 110-120 Pitch angle 63° 26' (gear) 26° 34' (pinion) Face angle 65° 36' (gear) 30° 29' (pinion)
1 products found
JPY: 2,160
USD: 13.55
-
RS PRO POM 20 Teeth Bevel Gear, 26 (Gear) °, 26 (Pinion) °, 34 (Pinion) °, 63 (Gear) ° Pitch , 30° 29' (Pinion), 65° 521-6137
Gears sold as a single unit, match pair with module size to give a 2:1 ratio. Delrin Bevel Gears. Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm ;sup>2 ;/sup> Hardness (Rockwell R) 110-120 Pitch angle 63° 26' (gear) 26° 34' (pinion) Face angle 65° 36' (gear) 30° 29' (pinion)
1 products found
JPY: 1,270
USD: 7.97
-
RS PRO Steel 15 Teeth Spur Gear, 15mm Pitch Diam. , 17mm Hub Diam. , 8mm Bore Diam. 521-6216
DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent. SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width. Steel Metric Spur Gears. RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. Features and Benefits. Steel EN8 (080M40/080M46) or equivalent Tensile strength: 569N/mm ;sup>2 ;/sup> (min.) 20° pressure angle
1 products found
JPY: 2,540
USD: 15.93
-
RS PRO Steel 16 Teeth Spur Gear, 16mm Pitch Diam. , 18mm Hub Diam. , 8mm Bore Diam. 521-6222
DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent. SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width. Steel Metric Spur Gears. RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. Features and Benefits. Steel EN8 (080M40/080M46) or equivalent Tensile strength: 569N/mm ;sup>2 ;/sup> (min.) 20° pressure angle
1 products found
JPY: 2,560
USD: 16.06
-
RS PRO Steel 18 Teeth Spur Gear, 18mm Pitch Diam. , 20mm Hub Diam. , 8mm Bore Diam. 521-6238
DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent. SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width. Steel Metric Spur Gears. RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. Features and Benefits. Steel EN8 (080M40/080M46) or equivalent Tensile strength: 569N/mm ;sup>2 ;/sup> (min.) 20° pressure angle
1 products found
JPY: 2,770
USD: 17.38
-
RS PRO Steel 20 Teeth Spur Gear, 20mm Pitch Diam. , 16mm Hub Diam. , 8mm Bore Diam. 521-6244
DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent. SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width. Steel Metric Spur Gears. RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. Features and Benefits. Steel EN8 (080M40/080M46) or equivalent Tensile strength: 569N/mm ;sup>2 ;/sup> (min.) 20° pressure angle
1 products found
JPY: 3,340
USD: 20.95
-
RS PRO Steel 24 Teeth Spur Gear, 24mm Pitch Diam. , 20mm Hub Diam. , 8mm Bore Diam. 521-6266
DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent. SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width. Steel Metric Spur Gears. RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. Features and Benefits. Steel EN8 (080M40/080M46) or equivalent Tensile strength: 569N/mm ;sup>2 ;/sup> (min.) 20° pressure angle
1 products found
JPY: 1,720
USD: 10.79
-
RS PRO Steel 25 Teeth Spur Gear, 25mm Pitch Diam. , 20mm Hub Diam. , 8mm Bore Diam. 521-6272
DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent. SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width. Steel Metric Spur Gears. RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. Features and Benefits. Steel EN8 (080M40/080M46) or equivalent Tensile strength: 569N/mm ;sup>2 ;/sup> (min.) 20° pressure angle
1 products found
JPY: 3,830
USD: 24.03
-
RS PRO Steel 26 Teeth Spur Gear, 26mm Pitch Diam. , 22mm Hub Diam. , 8mm Bore Diam. 521-6288
DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent. SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width. Steel Metric Spur Gears. RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. Features and Benefits. Steel EN8 (080M40/080M46) or equivalent Tensile strength: 569N/mm ;sup>2 ;/sup> (min.) 20° pressure angle
1 products found
JPY: 3,210
USD: 20.14
-
RS PRO Steel 28 Teeth Spur Gear, 28mm Pitch Diam. , 22mm Hub Diam. , 8mm Bore Diam. 521-6294
DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent. SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width. Steel Metric Spur Gears. RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. Features and Benefits. Steel EN8 (080M40/080M46) or equivalent Tensile strength: 569N/mm ;sup>2 ;/sup> (min.) 20° pressure angle
1 products found
JPY: 4,620
USD: 28.98
-
RS PRO Steel 30 Teeth Spur Gear, 30mm Pitch Diam. , 25mm Hub Diam. , 10mm Bore Diam. 521-6301
DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent. SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width. Steel Metric Spur Gears. RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. Features and Benefits. Steel EN8 (080M40/080M46) or equivalent Tensile strength: 569N/mm ;sup>2 ;/sup> (min.) 20° pressure angle
1 products found
JPY: 5,430
USD: 34.06
