Hydraulic & Pneumatic Tools
Filters
-
10t Hydraulic Hand-Operated Jack, Lift Height 75mm JAS103
Mechanical support must be used to support the load. Do not rely solely on the hydraulic pressure of the jack.
Lightweight Jack1 products found
JPY: 301,000
USD: 1,872.82
-
10t Hydraulic Hand-Operated Jack, Lift Height 125mm JAS105
Mechanical support must be used to support the load. Do not rely solely on the hydraulic pressure of the jack.
Lightweight Jack1 products found
JPY: 335,000
USD: 2,084.37
-
Hose Assembly with Threaded Connection, length 900mm, 700 bar HC7203
Use hose ; 365-0125 365-0125 with flat cylinder ; 283-0982 283-0982. High Pressure Hose. Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design factor Four layer design, including 2 high strength steel wire braids Outside jacket is polyurethane, for maximum abrasion resistance Crimped on rubber strain relief for improved life and durability
1 products found
JPY: 46,900
USD: 291.81
-
Hose Assembly with Threaded Connection, length 1.8m, 700 bar HC7206
Use hose ; 365-0125 365-0125 with flat cylinder ; 283-0982 283-0982. High Pressure Hose. Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design factor Four layer design, including 2 high strength steel wire braids Outside jacket is polyurethane, for maximum abrasion resistance Crimped on rubber strain relief for improved life and durability
1 products found
JPY: 49,700
USD: 309.23
-
Hose Assembly with Threaded Connection, length 3m, 700 bar HC7210
Use hose ; 365-0125 365-0125 with flat cylinder ; 283-0982 283-0982. High Pressure Hose. Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design factor Four layer design, including 2 high strength steel wire braids Outside jacket is polyurethane, for maximum abrasion resistance Crimped on rubber strain relief for improved life and durability
1 products found
JPY: 62,000
USD: 385.76
-
Hose Assembly with Threaded Connection, length 1.8m, 700 bar HA7206
Use hose ; 365-0125 365-0125 with flat cylinder ; 283-0982 283-0982. High Pressure Hose. Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design factor Four layer design, including 2 high strength steel wire braids Outside jacket is polyurethane, for maximum abrasion resistance Crimped on rubber strain relief for improved life and durability
1 products found
JPY: 47,300
USD: 294.30
-
10t Hydraulic Hand-Operated Jack, Lift Height 35mm JCS10
Mechanical supports should be used to support loads, do not rely on the jack hydraulic pressure alone. For details of Service Kit contents, please refer to RS website under 'Repair Kit Content Datasheet'. Low Height Jacks. The Hi-Force compact hydraulic jack is ideal for lifting or positioning. The jack is lightweight and compact enough to use within small spaces. The hydraulic jack also has a handle which can be removed. Hi-Force have also designed these jacks with a safety overload protection valve and they also have a fully sealed hydraulic system. High quality Sealed hydraulic system Pumping mechanism which can rotate through 360°, making this jack ideal for lifting or positioning in confined spaces Spring assisted return Safety overload protection valve fitted to all models Removable 200mm long operation lever supplied Service kit available for 10 ton version
1 products found
JPY: 361,000
USD: 2,246.14
-
HYDRAULIC SETTING TOOL M6 PMTC6
ENV1,ENV2,ENV5 Certificate number 02 / 00022. The Earth Bonding system has been approved for use by the Ministry of Defence, Warship Support agency and is NATO codified. The Earth Bonding system has been independently tested by the Defence Evaluation and Research Agency (DERA). Earth Bond Hydraulic Setting Tool. The Glenair® Earth Bond Hydraulic setting tool offers a reliable way of allowing attachment to metallic structures. It will assist in creating a method of electrical grounding that is widely used in Industries such as Automotive, Railway, Military Vehicles, and Rolling stock. An Equipotential bond is created and it is suitable where lightning strike protection is required, for EMC where low resistance electrical connections must be maintained. The Earth terminal can be used in hazardous area where a naked flame is not allowed. Ideal for applications where there is no access behind a structure as it can be installed from the one side. Lightweight hydraulic setting tool Creates a consistent low electrical resistance connection Produces a high strength joint when used with the Earth Bond
1 products found
JPY: 684,000
USD: 4,255.85
-
HYDRAULIC SETTING TOOL M10 PMT10
ENV1,ENV2,ENV5 Certificate number 02 / 00022. The Earth Bonding system has been approved for use by the Ministry of Defence, Warship Support agency and is NATO codified. The Earth Bonding system has been independently tested by the Defence Evaluation and Research Agency (DERA). Earth Bond Hydraulic Setting Tool. The Glenair® Earth Bond Hydraulic setting tool offers a reliable way of allowing attachment to metallic structures. It will assist in creating a method of electrical grounding that is widely used in Industries such as Automotive, Railway, Military Vehicles, and Rolling stock. An Equipotential bond is created and it is suitable where lightning strike protection is required, for EMC where low resistance electrical connections must be maintained. The Earth terminal can be used in hazardous area where a naked flame is not allowed. Ideal for applications where there is no access behind a structure as it can be installed from the one side. Lightweight hydraulic setting tool Creates a consistent low electrical resistance connection Produces a high strength joint when used with the Earth Bond
1 products found
JPY: 684,000
USD: 4,255.85
-
Hydraulic Spread Cylinder, 0.75t Capacity, 700 bar, 3/8-18 WR15
Hydraulic Spread Cylinder. Single acting, spring return For use when a large stroke is required for a spreading application Fitted with a female high flow coupler Requires a high pressure pump and hose link, available separately
1 products found
JPY: 403,000
USD: 2,507.47
-
Hydraulic Wedge Cylinder, 1T Capacity, 700 bar, 3/8-18 WR5
Hydraulic Wedge Cylinder. Single acting, spring return For use when positioning and lifting heavy loads in confined working areas Fitted with a female high flow coupler Requires a high pressure pump and hose link, available separately
1 products found
JPY: 132,000
USD: 821.30
-
［Discontinued］Hose Assembly with Threaded Connection, length 600mm, 700 bar HC7202E001
Use hose ; 365-0125 365-0125 with flat cylinder ; 283-0982 283-0982. High Pressure Hose. Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design factor Four layer design, including 2 high strength steel wire braids Outside jacket is polyurethane, for maximum abrasion resistance Crimped on rubber strain relief for improved life and durability
1 products found
JPY: 15,200
USD: 94.57
