Wera Tools LLC

Drive 1/4 inch HEX Counter Sink Size 6.3 x 31 mm and others

Wera Tools LLC

8-Piece 1/4HEX Replaceable Bit Driver Countersink Bit Set with Case　104650

846/8 series.
High quality 3-flute counter sink bit 8-piece set.

Wera Tools LLC

8-Piece 1/4HEX Replaceable Bit Driver Countersink Drill Bit Set with Case　104655

845/8 Countersink Drill Bit Set.
8-piece countersink set in a sturdy plastic box.

Wera Tools LLC

Countersink Drill Bit Size M3 x 32 mm and others

Snap-on Tools Japan K.K.

Sheet Cloths TOP Corporation screw Size: 3/8 24 adjustment range (inch): 0.001.Red jumbo and others

Snap-on Tools Japan K.K.

Counter Sink Integral Pilot Effective Blade diameter (inch): 3/32 Number of blades:3 and others

Snap-on Tools Japan K.K.

Counter Sink Integral Pilot Set 3/32, 1/8, 5/32, 3/16　ATI420D-4PC

NATO stock number.
High concentric quality achieved by carving.

TRUSCO NAKAYAMA CORPORATION

Nice Men G Titanium coating Effective Blade diameter: 15 Shank Diameter:6 and others

Counter Sink Ti Coat tip angle: 90 Effective Blade diameter: 6.3 and others

TRUSCO NAKAYAMA CORPORATION

Counter Sink Set Ti Coat 6 set Titanium coating Φ6.3, 8.3, 10.4, 12.4, 16.5, 20.5　TSCSC

High Speed Steel is used as the base material and has excellent wear and heat resistance.
Surface hardness is high by surface titanium coating treatment, and heat and wear resistance and sharpness are improved compared with high speed.

TRUSCO NAKAYAMA CORPORATION

Counter Sink manually Handle for 8mm and others

Walter Japan KK

Counter Sink Ti Coat tip angle: 90 Effective Blade diameter: 6.3 and others

NOGAJAPAN Ltd.

Counter Sink Set 3 blades Ti coating tip angle: 90 Φ6.3, Φ10.4, Φ16.5, Φ20.5, Φ25.0　CJ5154T

Heat treated high speed steel is bladed with CBN polishing.
It is a deep and sharp cutting edge.

NOGAJAPAN Ltd.

Counter Sink Set 3 blades Ti coating tip angle: 90 Φ6.3, Φ8.3, Φ10.4, Φ12.4, Φ16.5, Φ20.5　CJ6152T

Heat treated high speed steel is bladed with CBN polishing.
It is a deep and sharp cutting edge.

ILIX Prazisionswerkzeuge GmbH

Counter Sink Set 4 set DLC coating Φ16.5, 20.5, 25.0, 37.0　6277-LSDC

Excellent adhesion prevention and low friction characteristic of DLC (Diamond-Like Carbon Coat) allows for excellent efficiency and finish surface processing.
Work Material: Aluminum Alloy/Copper Alloy.

Walter Japan KK

Counter Sink tip angle: 90 Effective Blade diameter: 4.3 and others

TRUSCO NAKAYAMA CORPORATION

Counter Sink Cobalt HSS tip angle: 90 Effective Blade diameter: 6.3 and others

TRUSCO NAKAYAMA CORPORATION

Counter Sink Cobalt HSS Set 6 set Non coating Φ6.3, 8.3, 10.4, 12.4, 16.5, 20.5　TSCS

Uses cobalt high speed steel as the base material and has excellent wear and heat resistance.
With the use of 3 blades, the cutting powder is well drained and the finish is beautiful.

NOGAJAPAN Ltd.

Counter Sink Cobalt HSS 3 blades tip angle: 90 Effective Blade diameter: 6.3 and others

NOGAJAPAN Ltd.

Cemented Carbide Counter Sink 3 blades tip angle: 90 Effective Blade diameter: 6.3 and others

ONISHI MANUFACTURING Co., Ltd.

Hex axis Drill Cutter in Drill Groove length 15 Effective Blade diameter: 9.0 and others

ONISHI MANUFACTURING Co., Ltd.

Drill Cutter only in Drill (L 15mm) 3.0mm and others

STAR-M Corporation

HSS chamfer Cutter tip angle: 90 Effective Blade diameter:6 and others

YAMAWA MFG. Co., Ltd.

Counter Sink (HSS) tip angle: 90 Effective Blade diameter:6 and others

RUKO

Hex Shank Counter Sink Non Coat Tip angle: 90 Effective Blade diameter: 6.3 and others

RUKO

Hex Shank Counter Sink Ti Coat Tip angle: 90 Effective Blade diameter: 6.3 and others

Fukudaseiko

Center Reaming SKH51 tip angle: 60 Effective Blade diameter:6 and others

Walter Japan KK

DIN 6535 HA adaptor AK610.Z12.E12.022 and others

Walter Japan KK

HSS countersinkers E681812.5 and others

Walter Japan KK

HSS countersinkers E6819TIN10 and others

Walter Japan KK

HSS countersinkers E781816 and others

RUKO

Counter Sink "quick sheet" Titanium aluminum 19.0mm and others

RUKO

Counter Sink "quick sheet" 23.0mm and others

MAPAL KK

MEGA-Countersink (CDS110) unequal minutes% 3 blades　COS110-0630-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) unequal minutes% 3 blades　COS110-1040-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) unequal minutes% 3 blades　COS110-1650-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) unequal minutes% 3 blades　COS110-2050-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) unequal minutes% 3 blades　COS110-2500-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) unequal minutes% 3 blades　COS110-6.3-25-335C-SP345-SET

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

TRUSCO NAKAYAMA CORPORATION

Counter Sink Cobalt HSS 4.3mm　TCS43

Uses cobalt high speed steel as the base material and has excellent wear and heat resistance.
With the use of 3 blades, it has a beautiful finish with good powder removal.