Fukudaseiko

Angle Cutter With Handle (45 ° Φ10 × Blade length 3.0 × Neck diameter: 4) and others

Fukudaseiko

Angle Cutter With Handle (60 ° Φ10 × Blade length 5.2 × Neck diameter: 4) and others

Fukudaseiko

T Slot Endmill (HSS, Φ15 × Blade length 5 × Neck diameter: 6.0) and others

Fukudaseiko

Counterbore (Hexagon Socket Head Bolt, Applicable bolt: M3 x Outer Diameter 5.9 x Guide diameter : 3.2) and others

Fukudaseiko

Long Shank Counterbore (Hexagon Socket Head Bolt, Applicable bolt: M3 x Outer Diameter 6.5 x Guide diameter : 3.2) and others

Fukudaseiko

Counterbore (Flat Countersunk Screw, Outer Diameter 7.5 x Guide diameter : 3.2 x Total length 38) and others

Fukudaseiko

Straight Shank Drill (With Carbide Blade, Φ3.0 × Blade length 43 × Total length 75mm) and others

Fukudaseiko

Slim Shank Drill (With Carbide Blade, Φ14.0 × Blade length 70 × Total length 150mm) and others

Fukudaseiko

Tapered Shank Drill (Carbide Blade, Φ10.0 x Blade length 60 × Total length 140mm) and others

Fukudaseiko

Center chamfer mill countersink angle (°): 90 Drill diameter: 4 Length: 75 Shank Diameter:8 and others

Fukudaseiko

Corner Rounding Endmill 0.5R and others

Fukudaseiko

Tapered Endmill 2 blades 15 ° x3 and others

Fukudaseiko

Center Reaming SKH51 tip angle: 60 Effective Blade diameter:6 and others

Fukudaseiko

Ball EndMills 2 pieces Blade 0.50 R 2BE0.50R　2BE0.50R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 0.55 R 2BE0.55R　2BE0.55R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 0.60 R 2BE0.60R　2BE0.60R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 0.65 R 2BE0.65R　2BE0.65R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 0.70 R 2BE0.70R　2BE0.70R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 0.75 R 2BE0.75R　2BE0.75R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 0.80 R 2BE0.80R　2BE0.80R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 0.85 R 2BE0.85R　2BE0.85R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 0.90 R 2BE0.90R　2BE0.90R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 0.95 R 2BE0.95R　2BE0.95R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.00 R 2BE1.00R　2BE1.00R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.05 R 2BE1.05R　2BE1.05R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.10 R 2BE1.10R　2BE1.10R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.15 R 2BE1.15R　2BE1.15R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.20 R 2BE1.20R　2BE1.20R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.25 R 2BE1.25R　2BE1.25R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.30 R 2BE1.30R　2BE1.30R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.35 R 2BE1.35R　2BE1.35R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.40 R 2BE1.40R　2BE1.40R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.45 R 2BE1.45R　2BE1.45R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.50 R 2BE1.50R　2BE1.50R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.55 R 2BE1.55R　2BE1.55R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.60 R 2BE1.60R　2BE1.60R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.65 R 2BE1.65R　2BE1.65R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.70 R 2BE1.70R　2BE1.70R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.75 R 2BE1.75R　2BE1.75R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

Ball EndMills 2 pieces Blade 1.80 R 2BE1.80R　2BE1.80R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.