Fukudaseiko

Angle Cutter With Handle (45 ° Φ10 × Blade length 3.0 × Neck diameter: 4) and others

Fukudaseiko

Angle Cutter With Handle (60 ° Φ10 × Blade length 5.2 × Neck diameter: 4) and others

Fukudaseiko

T Slot Endmill (HSS, Φ15 × Blade length 5 × Neck diameter: 6.0) and others

FUJIGEN KOGYO Co., Ltd.

Arm For NICECUT (Negative S Type, 3 Pieces)　AMNS-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Arm For NICECUT (Negative S Type, 6 Pieces)　AMNS-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Arm For NICECUT (Negative T Type, 3 Pieces)　AMNT-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Arm For NICECUT (Negative T Type, 6 Pieces)　AMNT-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ12, Machining Diameter Φ30, Negative Type)　ARN12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ16, Machining Diameter Φ40, Negative Type)　ARN16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ12, Machining Diameter Φ30, Positive Type)　ARP12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ16, Machining Diameter Φ40, Positive Type)　ARP16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Torque Wrench (T-20)　BT-20

Used to attach the clamp screw to the cutter.

FUJIGEN KOGYO Co., Ltd.

Clamp Parts Set　CL-1S

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

Cap Bolt For NICECUT　CP6-15

Used to attach the arm to the cutter.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (8R to 10 R)　DC32-40ALR

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (8R to 10 R, Long Type)　DC32-40ALRL

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (5R to 7R)　DC32-40ASR

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (5R to 7R, Long Type)　DC32-40ASRL

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

Wrench (Hexagon 3mm)　K3

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

Wrench (Hexagon 5mm)　K-5

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

Torque Wrench (T-9)　MA-1

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

Torque Wrench (T-15)　N-6

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SYURIRIN, 2 Blades, Shank Φ16, Machining diameter Φ20)　NC2-1620

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SYURIRIN, 3 Blades, Shank Φ25, Machining diameter Φ30)　NC3-2530

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SYURIRIN, 4 Blades, Shank Φ32, Machining diameter Φ40)　NC4-3240

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SYURIRIN, 5 Blades, Shank Φ32, Machining diameter Φ50)　NC5-3250

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ32, Machining Diameter Φ40)　NK9040T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ20, Machining Diameter Φ40)　NK9040T-20

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ32, Machining Diameter Φ50)　NK9050T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ20, Machining Diameter Φ50)　NK9050T-20

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ32, Machining Diameter Φ60)　NK9060T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ32, Machining Diameter Φ70)　NK9070T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ32, Machining Diameter Φ80)　NK9080T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (NICECUT, 3 Blades, Φ100, S Type)　NKN32-100S-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (NICECUT, 3 Blades, Φ110, T Type)　NKN32-110T-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (NICECUT, 3 Blades, Φ130, S Type)　NKN32-130S-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (NICECUT, 3 Blades, Φ140, T Type)　NKN32-140T-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUMIKKO, Shank Φ25, Machining Diameter Φ30, 2.5 R to 5R)　SK25-30ALR

Nose R is R0.5 to R5.
The outer blade has a back taper and can be used mainly in the corner R and bottom R.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUMIKKO, Shank Φ25, Machining Diameter Φ30, 2.5 R to 5R, Long Type)　SK25-30ALRL

Nose R is R0.5 to R5.
The outer blade has a back taper and can be used mainly in the corner R and bottom R.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUMIKKO, Shank Φ25, Machining Diameter Φ30, 2.5 R or less)　SK25-30ASR

Nose R is R0.5 to R5.
The outer blade has a back taper and can be used mainly in the corner R and bottom R.