MAPAL KK

Chamfer mill (OptiMill) SCM340 4 blades chamfer countersink angle (°): 90 Length: 54 Shank Diameter:4 and others

NOGAJAPAN Ltd.

Long reach back counterbore Mini chamfer 90 ° blade Φ3.0 and others

NOGAJAPAN Ltd.

Long reach back counterbore Mini chamfer (Long Shank) 90 ° blade Φ4.0 and others

NOGAJAPAN Ltd.

Inversed spot facing Mini chamfer 120 ° blade Φ2.0 and others

NOGAJAPAN Ltd.

Inversed spot facing Mini chamfer 45 ° blade dove-tailed Φ1.5 and others

Fukudaseiko

Corner Rounding Endmill 0.5R and others

Fukudaseiko

Tapered Endmill 2 blades 15 ° x3 and others

BIG DAISHOWA SEIKI Co., Ltd.

Chamfer Cutter ST shank Type Φ33 blade 1 Shank Diameter: 20 and others

BIG DAISHOWA SEIKI Co., Ltd.

Throw-away Tips C Cutter for width: 6.35 Length: 12.7 Thickness: 2.7 and others

BIG DAISHOWA SEIKI Co., Ltd.

C Cutter Boy　ST12B-C0525

Carbide guide system allows stable cutting and is ideal for tabletop drilling machines.
A carbide chip that can be used for 3 corners, which has a long life and is economical.

BIG DAISHOWA SEIKI Co., Ltd.

C Cutter Universal type　ST20-C5/85A-40

Since it is a universal type, the chamfer angle of 5° to 85° can be achieved by 1 piece.
Turn it with a wrench to swing the cartridge and adjust the chamfer angle.

BIG DAISHOWA SEIKI Co., Ltd.

Chamfer Cutter C Cutter Mini Φ12.7 Length: 93 Shank Diameter: 12 and others

BIG DAISHOWA SEIKI Co., Ltd.

Center boy Shank Diameter: 10 Cutter tip angle: 90 Length: 150 and others

BIG DAISHOWA SEIKI Co., Ltd.

Throw-away bit 1 pcs Φ10 Number of blades:2 and others

BIG DAISHOWA SEIKI Co., Ltd.

Center boy 120 ° Φ13 Length: 150 Shank Diameter: 12　ST12-CBY12013

The center can be found and chamfered at the same time.
Since it is a cutting edge replacement system, there is no need for repolishing.

BIG DAISHOWA SEIKI Co., Ltd.

Throw-away bit Φ13 Conform models: ST12-CBY12013, CBY09013　CBY120135P

Since it is a throw-away with an interchangeable cutting edge system, there is no need for repolishing.

NOGAJAPAN Ltd.

2-18 Inner diameter for Counter Sink 90 ° 10mm shank and others

NOGAJAPAN Ltd.

3-19 Inner diameter for Counter Sink 90 ° slim Holder of Laser Equipment 10mm shank and others

NOGAJAPAN Ltd.

2-18 Outer Diameter for Counter Sink 90 ° 10mm shank and others

NOGAJAPAN Ltd.

K1 in Outer Diameter for Counter Sink 90 ° MT 2 shank and others

Nine9

NC.Pot Drill 90 ° Holder of Laser Equipment Shank Diameter: 20 Length: 220　99616-14-220L

With a single chip, it is possible to perform firming, chamfering, V-grooving and engraving.
With a creative chip design and coating, high-speed machining is possible.

Nine9

Carved Seal Cutter Holder of Laser Equipment Shank Diameter: 6 Length: 40　99619-V045-06

High life due to the special shape of the chip design.
With a creative chip design and coating, high-speed machining is possible.

FUJIGEN KOGYO Co., Ltd.

Tibirsko Blade diameter: Φ1.2-Φ9.7 tip angle: 90 Shank Diameter: 10 and others

FUJIGEN KOGYO Co., Ltd.

Unhulled Eco Blade diameter: Φ1.2-Φ13.6 tip angle: 90 Shank Diameter: 12 and others

FUJIGEN KOGYO Co., Ltd.

Eco Men Blade diameter: Φ1.2-Φ21.6 tip angle: 90 Shank Diameter: 20 and others

FUJIGEN KOGYO Co., Ltd.

Chwimmi tip angle: 90 Length: 105 Shank Diameter: 10 and others

FUJIGEN KOGYO Co., Ltd.

Unhulled Men tip angle: 90 Length: 110 Shank Diameter: 16 and others

FUJIGEN KOGYO Co., Ltd.

Big fir tip angle: 90 Length: 130 Shank Diameter: 20 and others

FUJIGEN KOGYO Co., Ltd.

Tibirsko 2 Shank Diameter: 16 Maximum chamfer diameter: Φ18.0 and others

FUJIGEN KOGYO Co., Ltd.

Unhulled Eco 2 Shank Diameter: 20 Maximum chamfer diameter: Φ24.7 and others

FUJIGEN KOGYO Co., Ltd.

Eco Men 2 Shank Diameter: 32 Maximum chamfer diameter: Φ36.3 and others

FUJIGEN KOGYO Co., Ltd.

Buytender Set (body, Arm) and others

FUJIGEN KOGYO Co., Ltd.

Young Men tip angle: 30 Shank Diameter: 32 and others

FUJIGEN KOGYO Co., Ltd.

Drilling Machine for chamfer displacement Ruby tip angle: 45 Shank Diameter: 10 and others

FUJIGEN KOGYO Co., Ltd.

Marchangelmir tip angle: 0 to 90 Shank Diameter: 32 and others

FUJIGEN KOGYO Co., Ltd.

R Special Jr. shank Φ25　NK25-05R

Chip replaceable and R chamfering up to 0.5~5R is possible.
Carbide chips that can be used on 4 sides with 1 chip, and the life is more than 5 times longer than Hiss.

FUJIGEN KOGYO Co., Ltd.

Ryan Men sheet R tip angle: 45 Shank Diameter: 16 and others

FUJIGEN KOGYO Co., Ltd.

Mini R tip angle: 45 Shank Diameter: 20　MR20-16S

R chamfer and C chamfer can be performed by replacing the chip.
It uses a chip that can be used for 8 corners.

FUJIGEN KOGYO Co., Ltd.

Clamp Screw Length: 4.8mm M2.5 right and others

FUJIGEN KOGYO Co., Ltd.

Lock pin Length 20mm M6 Right and others