RUKO

Spiral Step Drill (2 Blades, Short Type, Φ4 to 12mm, Number of Steps: 9, Step Width: 2mm) and others

RUKO

Spiral Step Drill (2 Blades, Ti Coating, Short Type, Φ4 to 12mm, Number of Steps: 9, Step Width: 2mm) and others

RUKO

Spiral Step Drill (3 Blades, Φ4 to 20mm, Number of Steps: 9, Step Width: 4mm) and others

RUKO

Hex Shank Tapping Drill M3 x 0.5 Screw Length:5mm Accuracy:6H and others

RUKO

Hex Shank Tapping Drill TIN Coating M3 x 0.5 Screw Length:5mm Accuracy:6H and others

RUKO

Hex Shank Counter Sink Non Coat Tip angle: 90 Effective Blade diameter: 6.3 and others

RUKO

Hex Shank Counter Sink Ti Coat Tip angle: 90 Effective Blade diameter: 6.3 and others

RUKO

Spiral Step Drill-Set (2 Blades, 3 Pieces, TiAlN Coating) and others

RUKO

Spiral Step Drill (Max 12mm, HSS) and others

RUKO

Spiral Step Drill (Max 12mm, Ti Coating) and others

RUKO

Spiral Step Drill (2 Blades, Max 20mm, HSS) and others

RUKO

Spiral Step Drill (2 Blades, Max 40.5mm, TiAlN Coating) and others

RUKO

Spot Cutter HSS Drill (Hex-Axis, Carbide Chip 7mm, 101107) and others

RUKO

Counter Sink "quick sheet" Titanium aluminum 19.0mm and others

RUKO

Counter Sink "quick sheet" 23.0mm and others

RUKO

Hex Shank Tapping Drill M3X0 5 36mm and others

RUKO

Hex Shank Tapping Drill M3X0 5 36mm (TIN Coatinging) and others

RUKO

101201 Milling Drill 6.0X90 (1)　101201

Drilling, crossed-hole machining, etc.
It is very convenient for adjusting dimensions and machining at the site.

RUKO

101201T Milling Drill 6.0mM TIN and others

RUKO

Spiral Step Drill and others

RUKO

Countersink ULTIMATE CUT and others

RUKO

Countersink ULTIMATE CUT and others

RUKO

［Discontinued］Spiral Step Drill (3 Blades, Ti Coating, Φ4 to 12mm, Number of Steps: 9, Step Width: 4mm) and others

RUKO

［Discontinued］Step Drill Set (3 Blades, 3 Pieces)　101326

The 3-blade type allows for stable drilling without stress and without flutter.
Work Material: Iron (Strength 900 N/mm^2 or Less), Aluminum, Brass, Plastic (Plastic only up to 2mm, others up to 4mm)

RUKO

［Discontinued］Counter Sink "quick sheet" 5 set Set　102754

With the newly designed optimum cutting shape and the combination of 3 blades, the working speed is increased by more than 30% and the product life is increased by more than 25% compared with the conventional product.
Work Material: Iron, Cast Iron, Non-ferrous Metal, Light Metal.

RUKO

［Discontinued］Hex Shank Tapping Drill (TIN Coatinging) Set　270020T

Hexagonal shaft shank specification, can be attached to cordless driver.
Drilling and screwing of iron plates can be performed without replacing the drill.

RUKO

［Discontinued］101120 Cemented Carbide Spot Drill 8.2X80　101120

For high strength steel, ALTIN has about 20 ~ 30% longer life than TIALN coat.
Automatic center hole machining prevents deviation from the spot.

RUKO

［Discontinued］101108F TIALN Coat Spot Drill 8.0X80 and others

RUKO

［Discontinued］228030 Engineers Drill HSSE Cobalt 5% Contained 3.0mM and others