Mitsubishi Materials Corporation

Carbide Drill (WSTAR, Internal Lubrication Type, Φ3 × Blade length 21 × Total length 72) and others

Mitsubishi Materials Corporation

Carbide Drill (WSTAR, External Lubrication Type, Φ3 × Blade length 16 × Total length 55) and others

Guhring Japan Corporation

Carbide Drill (Small diameter, Alumina Coating, Φ0.1 × Blade length 1.2 × Total length 38mm) and others

Guhring Japan Corporation

Carbide Drill (Small diameter, Alumina Coating, Φ1.0 × Blade length 10 × Total length 38mm) and others

Guhring Japan Corporation

Carbide Drill (Small diameter, Alumina Coating, Φ2.0 × Blade length 12 × Total length 38mm) and others

Iwata Tool Ltd.

GP Carbide Drill (ALT Coating, Short, Φ0.3 × Blade length 1.8 x Total length 40mm) and others

Iwata Tool Ltd.

GP Carbide Drill (ALT Coating, Regular, Φ0.3 × Blade length 3.6 x Total length 40mm) and others

Omikogyo Co., Ltd.

Carbide Drill (Steel, Short, 3D Type, External Lubrication Type, Φ3.0 x Blade length 15 x Total length 52mm) and others

Omikogyo Co., Ltd.

Carbide Drill (Steel, Regular, 5D Type, Internal Lubrication Type, Φ3.0 × Blade length 21 × Total length 58mm) and others

MAPAL KK

Carbide Drill (MEGA-DRILL-180, Internal Lubrication Type, X5D, Φ3.0 x Blade length 28 x Total length 66mm) and others

MAPAL KK

Carbide Drill (General Purpose, SCD 350, External Lubrication X4D, Φ3 × Blade length 22 x Total length 62mm) and others

MAPAL KK

Carbide Drill (General Purpose, SCD 351, Internal Lubrication Type, X4D, Φ3 × Blade length 22 x Total length 62mm) and others

MAPAL KK

Carbide Drill (MEGA-DRILL-Composite, SCD 250, External Lubrication, Φ3 × Blade length 28 x Total length 66mm) and others

MAPAL KK

Carbide Drill (MEGA-DRILL-Composite, SCD 260, External Lubrication, Φ3 × Blade length 28 x Total length 66mm) and others

MAPAL KK

Carbide Drill (MEGA-DRILL-Composite, SCD 271, Internal Lubrication,, Φ6 × Blade length 44 x Total length 82mm) and others

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.1 x 1)　MSDH 0.1X1

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.2 x 2)　MSDH 0.2X2

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.25 x 2.5)　MSDH 0.25X2.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.3 x 3)　MSDH 0.3X3

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.35 x 3.5)　MSDH 0.35X3.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.4 x 4)　MSDH 0.4X4

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.45 x 4.5)　MSDH 0.45X4.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.5 × 5)　MSDH 0.5X5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.55 x 5.5)　MSDH 0.55X5.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.6 x 6)　MSDH 0.6X6

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.65 x 6.5)　MSDH 0.65X6.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.7 x 7)　MSDH 0.7X7

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.75 x 7.5)　MSDH 0.75X7.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.8 x 8)　MSDH 0.8X8

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.85 x 8.5)　MSDH 0.85X8.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.9 x 9)　MSDH 0.9X9

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, 0.95 x 9.5)　MSDH 0.95X9.5

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Drill (Small, High Hardness Processing, MSDH, and Φ1 × 10)　MSDH 1X10

Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.01 x 0.06)　NSMD-MS-0.01X0.06

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.015 x 0.09)　NSMD-MS-0.015X0.09

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.02 x 0.12)　NSMD-MS-0.02X0.12

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.025 x 0.15)　NSMD-MS-0.025X0.15

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.03 x 0.18)　NSMD-MS-0.03X0.18

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.035 x 0.24)　NSMD-MS-0.035X0.24

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.

NS TOOL Co., Ltd.

NISSIN Carbide Micro-Drill (MUGEN Microcoating, NSMD-MS Φ0.045 x 0.3)　NSMD-MS-0.045X0.3

Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.