Guhring Japan Corporation

Square Endmill (3 Blades, Twist Angle 45 Degrees, Φ1.0 × Blade length 2mm) and others

Guhring Japan Corporation

Endmill (Multilead, RF 100 F, Hard-To-Cut Material, 4 Blades Regular, Φ4 × Blade length 11mm) and others

Guhring Japan Corporation

Endmill (Multilead, RF 100 U, General Purpose, 4 Blades Regular, Φ4 × Blade length 11mm) and others

Guhring Japan Corporation

Square Endmill (Multilead, RF 100 SF, 6 Blades for high-efficiency Finishing, Φ8 × Blade Length: 19mm) and others

Guhring Japan Corporation

Carbide Roughing Endmill (4 Blades, Φ6 × Blade Length: 13) and others

Guhring Japan Corporation

Carbide Drill (Small diameter, Alumina Coating, Φ0.1 × Blade length 1.2 × Total length 38mm) and others

Guhring Japan Corporation

Carbide Drill (Small diameter, Alumina Coating, Φ1.0 × Blade length 10 × Total length 38mm) and others

Guhring Japan Corporation

Carbide Drill (Small diameter, Alumina Coating, Φ2.0 × Blade length 12 × Total length 38mm) and others

Guhring Japan Corporation

Cobalt HSS Straight Drill (Φ10.7 x Blade length 94 x Total length 142mm, Blister Pack) and others

Guhring Japan Corporation

HSS Straight Drill (Φ10.7 x Blade length 94 x Total length 142mm, Blister Pack) and others

Guhring Japan Corporation

Spiral Tap (Metric Thread, Normal, TIN Coatinging, M2 x 0.4, Screw Length: 4, Precision: OH2) and others

Guhring Japan Corporation

Point Tap (Metric Thread) Coarse TIN Coating Coat M2x0.4 Screw Length: 8 Accuracy: OH2 and others

Guhring Japan Corporation

Fluteless Power Tap (Blind Hole And Through Hole) Coarse TIN Coating M2x0 4 Screw Length: 4 Accuracy: RH4 and others

Guhring Japan Corporation

Cemented Carbide solid.Red Milling Cutter M6x1.0 0 and others

Guhring Japan Corporation

Cemented Carbide solid.Red Milling Cutter Oil hole with M6x1.0 0 and others

Guhring Japan Corporation

NC Spotting Drill countersink angle (°): 90 Length: 46 Shank Diameter:3 and others

Guhring Japan Corporation

NC spotting Drill (alumina Coat) countersink angle (°): 90 Length: 46 Shank Diameter:3 and others

Guhring Japan Corporation

Cemented Carbide NC spotting Drill countersink angle (°): 90 Length: 62 Shank Diameter:5 and others

Guhring Japan Corporation

Cemented Carbide NC spotting Drill (alumina Coat) countersink angle (°): 90 Length: 62 Shank Diameter:5 and others

Guhring Japan Corporation

TiAlN Cemented Carbide rolling Power Tap coarse M10. 0X1.5　4447-M10.0X1.5

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN Cemented Carbide rolling Power Tap Coarse M12. 0X1.75　4447-M12.0X1.75

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN Cemented Carbide rolling Power Tap Coarse M16. 0X2.0　4447-M16.0X2.0

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN Cemented Carbide rolling Power Tap Coarse M20. 0X2.5　4447-M20.0X2.5

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN Cemented Carbide rolling Power Tap Coarse M5. 0X0.8　4447-M5.0X0.8

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN Cemented Carbide rolling Power Tap Coarse M6. 0X1.0　4447-M6.0X1.0

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN Cemented Carbide rolling Power Tap coarse M8. 0X1.25　4447-M8.0X1.25

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M10X1.5)　4449-M10.0X1.5

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M12X1.7)　4449-M12.0X1.75

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M14X2.0)　4449-M14X2.0

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M16X2.0)　4449-M16.0X2.0

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M18X2.5)　4449-M18.0X2.5

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M2X0.4)　4449-M2.0X0.4

The machining range of work material is wide, and high-efficiency machining is possible.
Powdered Hice and TiAlN coating reduce wear and extend life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M2.5X0.45)　4449-M2.5X0.45

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M20X2.5)　4449-M20.0X2.5

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M3X0.5)　4449-M3.0X0.5

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M4X0.7)　4449-M4.0X0.7

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M5X0.8)　4449-M5.0X0.8

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M6x1.0 0)　4449-M6.0X1.0

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, Coarse Thread, M8X1.25)　4449-M8.0X1.25

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN Spiral Tap (High Efficiency, UNF, M10X1.0)　4450-M10.0X1.0

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.