ENGINEER. INC.

Pin vise　TP-20

Can be used for precision machining, hobbies, etc., for fine size drilling and as a tap holder.
Brass (brass) material with chrome plated surface.

ENGINEER. INC.

Pin Vise (Total length 105mm, TP-23)　TP-23

Holds drills and taps for drilling printed circuit boards and machining precision parts for versatile use.

ENGINEER. INC.

Pin Vise (Total length 95mm, TP-24)　TP-24

Holds drills and taps for drilling printed circuit boards and machining precision parts for versatile use.

HOZAN TOOL INDUSTRIAL CO., LTD.

Drill Set, (Φ0.8 to Φ3.2, 5 pieces, K-5)　K-5

Available in a wide range of drill sizes
A small diameter size set that can be used in combination with pin vise (K-501/502), suitable for land-hole machining of substrates.

HOZAN TOOL INDUSTRIAL CO., LTD.

Drill Set, (Φ1.5 to Φ6.5, 13 pieces, K-493)　K-493

Available in a wide range of sizes
This set is ideal for desk drills (K-16/21). Contains a steel case.

HOZAN TOOL INDUSTRIAL CO., LTD.

Drill Set, (Φ1.0 to Φ10.0, 19 pieces, K-494)　K-494

Available in a wide range of drill sizes
A full-size set ideal for a desktop milling machine (K-280). Contains a steel case.

HOZAN TOOL INDUSTRIAL CO., LTD.

Drill Set, (Φ1.0 to Φ10.0, 19 pieces, K-495)　K-495

Available in a wide range of drill sizes
A small diameter size set that can be used in combination with pin vise (K-501/502), suitable for land-hole machining of substrates.

Mitsubishi Materials Corporation

Straight Drill Set (13 Pieces, Φ1.5 to 6.5mm / 0.5mm pitch) and others

Mitsubishi Materials Corporation

Cobalt HSS Drill Set (Stainless Steel, 13 Pieces, 1.5 pitch to 6.5mm / 0.5mm) and others

ISHIHASHI SEIKO

Straight Drill Set (13 Pieces, Φ1.5 to Φ6.5mm / 0.5mm pitch)　D13-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Straight Drill Set (19 Pieces, Φ1.0 to Φ10.0mm / 0.5mm pitch)　D19-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Straight Drill Set (25 Pieces, Φ1.0 to Φ13.0mm / 0.5mm pitch)　D25-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Straight Drill Set (100 Pieces, Φ1.0 to Φ10.0mm / 0.1mm pitch, Φ10.5 to Φ13.0mm / 0.5mm pitch, Φ10.9, Φ11.9, Φ12.9mm)　D100-RS

Drill set for general drilling.
Work Material: Mild Steel, General Steel, Cast Iron, Light Alloy.

ISHIHASHI SEIKO

Drill Set (10 Pieces, Extra MASAMUNE, Φ3.0 to Φ6.5mm / 0.5mm pitch)　EXD-10S

With cross-thinning at the tip, this drill set does not require a punch and cuts quickly.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Drill Set (15 Pieces, Extra MASAMUNE, Φ3.0 to Φ10.0mm / 0.5mm pitch)　EXD-15S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Drill Set (21 Pieces, Extra MASAMUNE, Φ3.0 to Φ13.0mm / 0.5mm pitch)　EXD-21S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Drill Set (100 Pieces, Extra MASAMUNE, Φ1.0 to Φ10.0mm / 0.1mm pitch, Φ10.5 to Φ13.0mm / 0.5mm pitch, Φ10.9, Φ11.9, Φ12.9mm)　EXD-100RS

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (13 Pieces, MASAMUNE, Φ1.5 to Φ6.5mm / 0.5mm pitch, Φ3.2mm)　COD-13S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
The sharpness does not affect hard-to-cut materials.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (19 Pieces, MASAMUNE, Φ1.0 to Φ10.0mm / 0.5mm pitch)　COD-19S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (25 Pieces, MASAMUNE, Φ1.0 to Φ13.0mm / 0.5mm pitch)　COD-25S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (100 Pieces, MASAMUNE, Φ1.0 to Φ10.0mm / 0.1mm pitch, Φ10.5 to Φ13.0mm / 0.5mm pitch, Φ10.9, Φ11.9, Φ12.9mm)　COD-100RS

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Cobalt Spiral Tap & Drilling Set (21 Pieces, Tap: M3 to M12, Pilot Hole Drill: 2.5 to 10.3mm)　COSSD-21

This is a set of spiral tap and downhole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt Jet Spiral Tap & Drill Set (21 Pieces, Tap: M3 to M12, Pilot Hole Drill: 2.5 to 10.3mm)　COJSD-21

It is a set of jet tap, spiral tap and bottom hole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Spiral Tap & Drill Set (21 Pieces, Extra MASAMUNE, Tap: M3 to M12, Pilot Hole Drill: 2.5 to 10.3mm)　SSD-21

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Spiral Tap & Drill Set (26 Pieces, M4, M5, M6, Pilot Hole Drill: 3.4, 4.3mm 5.2)　ESD-26S

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Cobalt Jet Spiral Tap & Drill Set (21 Pieces, Extra MASAMUNE, Tap: M3 to M12, Pilot Hole Drill: 2.5 to 10.3mm)　JSD-21

This is a set of jet tap, spiral tap and bottom hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Hand Tap & Drill Set (21 Pieces, Tap: M3 to M12, Pilot Hole Drill: 2.5 to 10.3mm) and others

Mitsubishi Materials Corporation

Mitsubishi Coating Drill Set (Model Number: GSDSET 13)　GSDSET13

It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.

Mitsubishi Materials Corporation

Mitsubishi Coating Drill Set (Model Number: GSDSET 19)　GSDSET19

It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.

Mitsubishi Materials Corporation

Mitsubishi Coating Drill Set (Model Number: GSDSET 25)　GSDSET25

It is a drill set that achieves 2~3 times longer life than non-coated.
Work material: general steel, stainless steel, cast iron, non-ferrous metal.

ISHIHASHI SEIKO

Hex Axis Drill Set 5 Pieces　6EXD-5S

Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.

ISHIHASHI SEIKO

Hex Axis Drill Set 8 Pieces　6EXD-8S

Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.

ISHIHASHI SEIKO

Hex Axis Drill Set 10 Pieces　6EXD-10S

Can be attached to and detached from the charging driver with one touch.
Uses a Masamune drill with good bite, excellent sharpness, and improved performance and operability.

ISHIHASHI SEIKO

Hex Axis Drill (Cobalt) Set 10 Pieces　6COD-10P

Can be attached to and detached from the charging driver with one touch.
Due to its cutting-oriented design, it has a good bite and excellent sharpness.

ISHIHASHI SEIKO

Twin Cutter Set 10 Pieces　ETC-10S

A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Twin Cutter Set 15 Pieces　ETC-15S

A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Twin Cutter Set 21 Pieces　ETC-21S

A drill that cuts well and lightly from ordinary steel to stains.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Twin Cutter Set 10 Pieces　MTC-10S

With our independently developed double special point, it can be drilled lightly, well cut, and beautifully without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Twin Cutter Set 15 Pieces　MTC-15S

With our independently developed double special point, it can be drilled lightly, well cut, and beautifully without burrs.
It can be used cheaply and contributes to labor saving and cost reduction. Economic.

ISHIHASHI SEIKO

Drill Set HSS 41 Pieces　D-41S

Steel case included.
Convenient set of 41 pieces.