Sửa chữa vật liệu power patch

Heavy Duty kim loại sửa chữa vật liệu tình yêu kim loại R

Chất pha loãng cho vật liệu sửa chữa kim loại mạnh　

Nó là một loại vật liệu sửa chữa bằng kim loại mạnh một gói bao gồm chủ yếu là nhôm, và được sử dụng sau khi pha loãng với chất pha loãng.
Khi được chữa khỏi, nó trở thành kim loại, và có thể được cắt, khoan và đánh bóng để tạo ra ánh kim loại.

JAPAN DURMETAL COLDWELDING SYSTEM, LTD.

Bộ siêu nhanh 125 g

JAPAN DURMETAL COLDWELDING SYSTEM, LTD.

Bộ dùng thử tiêu chuẩn

Devcon

Chất chống ăn mòn kim loại Patty 200g　16324

It is a metal repair agent for high heat resistance applications that can be used for metal products such as aluminum and stainless steel products that require heat resistance.
Polishing produces a stainless-steel metallic luster.

Devcon

Vật liệu lót kháng hóa chất EC7000AR 2 gallon　12750

Chemical resistant corrosion resistant lining material with excellent sulfuric acid, hydrochloric acid and nitric acid resistance in two-liquid mixing type.
It also exerts excellent effects on concentrated sulfuric acid and hydrochloric acid.

Devcon

Sơn lót EC 2Kg　207061

Primer for EC7000AR, safe zone (AS-150, AS-2500).
Can be used on concrete, mortar, metal and wood.

Devcon

SF 1lb (450g) bột sắt siêu cứng

Henkel Japan Ltd.

Các chất chống mài mòn túi Node WCH 10kg

Devcon

UW450g　16800

Underwater construction and underwater hardening putty.
Filling holes in pipes and other mechanical parts such as flanges, repairing cracks, regenerating corroded parts, and filling are possible.

Devcon

Chất chống ăn mòn và chống mài mòn có thể giặt được Ceramic Red 2lb

Devcon

Nhân sự siêu 3000 500g　HRS3000

Suitable for repairing areas affected by heat cycles.
Use together with attached glass tape to increase strength at high temperature and pressure.

Devcon

Đại lý sửa chữa bằng chứng mài mòn tải trọng tốt 300 30lb

Henkel Japan Ltd.

Thép Fix master Patty 500g

Henkel Japan Ltd.

Bộ thép đầu tiên Patty 454g EA3473　219293

It is a repair agent containing epoxy steel, and it can be cured and restored in about 10 minutes.
For steel, cast iron, stainless steel, concrete, aluminum, copper, etc.

Sắt Sửa chữa/Pate (Tiêu chuẩn nước/Sửa chữa chung) 450 g Set

Putty chịu nhiệt 700 g　EA934KB-14E

Thép không gỉ sửa chữa Putty 900 g　EA934RX-1

Molding repair of defects, wear, and breakage.　Repair of leaks in pipes, tanks and valves.　For repairing metals, PVC, castings, plastics, concrete, etc.
Solvent-free type on high-viscosity putty suitable for filling holes, cracks, nests of castings, joints, etc., filling holes, or film thickness lining. (A rubber spatula or a gold trowel will be used for the construction.)

Sắt Sửa Chữa Putty (Mài Mòn và Tác Động Kháng) 500 g　EA934WC-17

Long curing time and excellent impact resistance.
It hardens in water and on wet surfaces.

ASAHI ENGINEERING Co., Ltd.

Keo dán nhanh2　1019

Holes, cracks and chips can be easily and strongly repaired.
If you pour liquid (polymer liquid adhesive) and powder (welding powder) on it, it will cure in about 10 seconds (24 hours if secondary processing is required).

ASAHI ENGINEERING Co., Ltd.

Keo dán nhanh2　1067

ASAHI ENGINEERING Co., Ltd.

Keo dán nhanh2　1069

ASAHI ENGINEERING Co., Ltd.

Đa sửa chữa Putty　1161

It does not require any special equipment or technology, just by mixing the main agent and the curing agent, it can be cured like a metal, and it can be easily filled in the hole, filled in the nest, plated, glued and repaired.
After complete curing, holes, threads, polishing, painting, etc. can be added, and since it is an electrically defective conductor, electrical corrosion does not occur even when repair between dissimilar metals is performed.

Henkel Japan Ltd.

Chất chống mài mòn hiệu suất cao NORDBAK　2574389

High performance epoxy resin with large ceramic beads and micro silicone carbide can handle up to 121°C and protect against sliding wear.
It is the type not applicable to poison drama.

Henkel Japan Ltd.

Chất chống mài mòn hiệu suất cao NORDBAK　2604614

Poisonous and deleterious substances are not applicable.
Excellent protection against corrosion and erosion.

JAPAN DURMETAL COLDWELDING SYSTEM, LTD.

Bộ công cụ Hành động　BM-025AC

The Velometal Action Kit 250 g consists of two agents each of super rapid and standard types. One is a base agent with a high content of selected special steel and other metal molecules, and the other is an active agent containing a high content of aluminum ultrafine particles.
The chemical reaction occurs when these two agents are mixed well in a one-to-one volume ratio. The Super Rapid product cures in about 3 minutes at 20°C, and the Standard product cures in about 3 hours at 20°C.

JAPAN DURMETAL COLDWELDING SYSTEM, LTD.

Các loại Kit trong túi

JAPAN DURMETAL COLDWELDING SYSTEM, LTD.

Lựa chọn của DURMETAL

JAPAN DURMETAL COLDWELDING SYSTEM, LTD.

Lựa chọn của DURMETAL

JAPAN DURMETAL COLDWELDING SYSTEM, LTD.

Lựa chọn của DURMETAL

Illinois Tool Works

Keo để sửa chữa kim loại

Illinois Tool Works

Keo để sửa chữa kim loại　DV10130J

It is putty-like and can fill holes in pipes and other mechanical parts such as flanges, repair cracks, regenerate corroded parts, and plate.
After curing, it can be machined, perforated and tapped.

Illinois Tool Works

Keo để sửa chữa kim loại

Illinois Tool Works

Keo để sửa chữa kim loại

Illinois Tool Works

Keo để sửa chữa kim loại　DV10710J

It can be filled, bonded and repaired to various equipment.
For making various jigs and taking shapes.

Illinois Tool Works

Keo để sửa chữa kim loại　DV11410J

Since it contains aluminum oxide powder and has self-lubricating properties, it is especially effective for dynamic wear.
For repairing worn parts such as machine parts.

nissin industry

Kẽm Putty ST

ESCO Company Ltd.

Thanh kim loại Putty 80g　EA934AD-1

Filling dents in automobiles, repairing screw holes in machine tools, repairing pipe connections and cracks, and bonding and repairing various metals.　*Does not adhere to difficult-to-adhere materials such as polyethylene, polypropylene, nylon, silicone resin, fluororesin, and soft PVC.

ESCO Company Ltd.

Kim loại Putty 200g　EA934DB-5

If it is even buffed, it will give a stainless steel look.