Cáp Brackets trên trần
Bộ lọc
- theo nhóm Sản phẩm
- theo Sản phẩm
Sắp xếp theo:
-
For Cable Support Bracket Hanging Bolts
3Đã tìm thấy sản phẩm
JPY: 5,600-
USD: 35.10-
-
Cable Support Fittings 8WCSP
The cable can be separated and supported by the separator resin cover on the hook.
Cable support to the hanging bolt can be performed in combination with 36B, 69B, 912B, etc.1Đã tìm thấy sản phẩm
JPY: 3,780
USD: 23.70
-
Wall Cable Support Fittings 8WD
1Đã tìm thấy sản phẩm
JPY: 4,400
USD: 27.58
-
Cable Support Fittings for sepa bolts 8WDSB
Use the separate bolts used for formwork to support the cable on the wall.
Has vinyl coating for cable protection.1Đã tìm thấy sản phẩm
JPY: 3,100
USD: 19.43
-
For box Support Bracket Hanging bolts 912B
In combination with other products, it can also be used to support conduits and cables.
Can also be used for synthetic resin boxes.1Đã tìm thấy sản phẩm
JPY: 2,320
USD: 14.54
-
Conduit Support Bracket Hanging Bolts for Round Steel 912C
Can be easily attached by hand without using tools.
In combination with pyrac clips and PCH1, you can support conduits and cables.1Đã tìm thấy sản phẩm
JPY: 2,260
USD: 14.17
-
Cable Holder for insulation ACS2
Two fixed parts securely hold against pulling force due to cable bending.
Can be attached to the foam insulation wall with one push.1Đã tìm thấy sản phẩm
JPY: 1,980
USD: 12.41
-
M bar Clip AKC1
1Đã tìm thấy sản phẩm
JPY: 3,200
USD: 20.06
-
Single Clip Type 19
2Đã tìm thấy sản phẩm
JPY: 780-
USD: 4.89-
-
Field Bump Receiver Connection Reinforcing Bracket AKC1R
In addition to installation only with this product, it can be mounted on top of the connecting metal fittings.
1Đã tìm thấy sản phẩm
JPY: 900
USD: 5.64
-
M bar Clip AKC2
1Đã tìm thấy sản phẩm
JPY: 4,100
USD: 25.70
-
Double Clip 19 Type
2Đã tìm thấy sản phẩm
JPY: 1,000-
USD: 6.27-
-
Field Bump Receiver Connection Reinforcing Bracket AKC2R
In addition to installation only with this product, it can be mounted on top of the connecting metal fittings.
1Đã tìm thấy sản phẩm
JPY: 1,200
USD: 7.52
-
For box Support Bracket Hanging bolts BH9N
You can hang at the center of the outlet box.
Can be installed with the nut attached to the hanging bolt.1Đã tìm thấy sản phẩm
JPY: 2,840
USD: 17.80
-
-
Hanging Bracket for Duct with Long Hole
3Đã tìm thấy sản phẩm
JPY: 2,900-
USD: 18.18-
-
Channel Support Fittings BHIDH
Bolts with a dent tip structure are used to provide reliable support against pulling.
You can support the channel opening even if it is facing upward.1Đã tìm thấy sản phẩm
JPY: 3,750
USD: 23.51
-
Channel Support Fittings BHIKH
1Đã tìm thấy sản phẩm
JPY: 1,980
USD: 12.41
-
Hang Fittings for H-Shaped and I-Shaped Steel
9Đã tìm thấy sản phẩm
JPY: 1,240-
USD: 7.77-
-
Channel Support Fittings BHIPH
1Đã tìm thấy sản phẩm
JPY: 10,400
USD: 65.19
-
Hang Fittings for H-Shaped Steel
2Đã tìm thấy sản phẩm
JPY: 2,320-
USD: 14.54-
-
Channel Support Fittings
2Đã tìm thấy sản phẩm
JPY: 2,900-
USD: 18.18-
-
-
Ceiling Drilling Guide BXM1H
By using a holsaw, the work efficiency is improved compared with the conventional spinning saw.
You don't have to worry about damaging electric wires like a conventional spinning saw.1Đã tìm thấy sản phẩm
JPY: 1,590
USD: 9.97
-
Box position confirmation tool for ceiling BXM6
Even after the ceiling board is stretched, the full screw bolts protrude from the ceiling board, making it easy to locate the box.
Can be easily installed and removed from the box.1Đã tìm thấy sản phẩm
JPY: 2,020
USD: 12.66
-
Brace mounting Bracket (for one side)
2Đã tìm thấy sản phẩm
JPY: 4,100-
USD: 25.70-
-
Fall prevention auxiliary Fittings CFP1
A reinforcing metal fitting that can be used in conjunction with a gripple to reduce damage caused by falling ceiling base materials.
Can be used for double bar or single bar.1Đã tìm thấy sản phẩm
JPY: 4,950
USD: 31.03
-
Anti-shake Fittings
3Đã tìm thấy sản phẩm
JPY: 4,200-
USD: 26.33-
-
Horizontal universal joint Fittings
2Đã tìm thấy sản phẩm
JPY: 9,180-
USD: 57.54-
-
Raceway earth metal Fittings
2Đã tìm thấy sản phẩm
JPY: 4,150-
USD: 26.01-
-
Connecting H Material
5Đã tìm thấy sản phẩm
JPY: 1,360-
USD: 8.53-
-
-
Raising Opening Bracket
5Đã tìm thấy sản phẩm
JPY: 1,420-
USD: 8.90-
-
Duct ground Fittings DP7EK
It is a metal fitting that can make an electrical connection between a duct and a pull box or a distribution panel.
1Đã tìm thấy sản phẩm
JPY: 5,700
USD: 35.73
-
-
Duct Hanging Fittings
5Đã tìm thấy sản phẩm
JPY: 1,280-
USD: 8.02-
-
-
S-Hexagon M6 x 20 Delta Protect
2Đã tìm thấy sản phẩm
JPY: 6,850-
USD: 42.94-
-
-
For Cable Support Bracket Hanging Bolts
3Đã tìm thấy sản phẩm
JPY: 5,700-
USD: 35.73-
