Nam châm nhỏ phổ đứng 17kgf

Nam châm thủy lực phổ đứng 257mm 80kgf

TRUSCO NAKAYAMA CORPORATION

Bộ điều chỉnh cơ sở nam châm với lực hấp phụ (N): 800　TMA-80

You can fine-tune the holding direction of measuring instruments with the adjuster. (Fine range: 2 mm)
Can be used as a measuring instrument holder.

TRUSCO NAKAYAMA CORPORATION

Trọng lượng cơ sở nam châm Loại thanh chống Lực hấp phụ (N): 800　TMP-80

Since the main column and post are thick, the measuring instrument can be held stably.
Can be used as a retainer for measuring instruments.

TRUSCO NAKAYAMA CORPORATION

Lực hấp phụ cơ sở nam châm loại nhỏ (N): 250　TMM-25

Handy type with small, light weight and 250 N suction.
Can be used as a retainer for measuring instruments.

TRUSCO NAKAYAMA CORPORATION

Nam châm loại mini Base của Laser Thiết bị Hấp phụ lực (N): 200　M-A

Can be set at any angle with one touch.
The magnet section is not ON/OFF.

KANETEC CO., LTD.

Nam châm có độ cứng cao Lực hấp phụ (N): 1230

NOGAJAPAN Ltd.

Moth Loại phổ biến Magnet Base Adsorption force (N): 800　MB1035

Widespread magnet base without slight motion feed.

NOGAJAPAN Ltd.

Moth Loại phổ biến Magnet Base Adsorption force (N): 800　MB1030

Popular magnet base with fine motion feed.

NOGAJAPAN Ltd.

Kẹp Loại Dial Gauge chủ Lực hấp phụ (N): 800　PH2040

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

Popeye Stands Lực hấp phụ (N): 320　PH3100

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

Trọng lượng lớp kẹp Loại Dial Gauge Lực hấp phụ (N): 1000　PH4016

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

PH Mini Holder của lực hấp phụ thiết bị Laser (N): 150　PH5000

This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

KANETEC CO., LTD.

Cơ sở Borer của lực hấp phụ thiết bị Laser (N): 137

TRUSCO NAKAYAMA CORPORATION

Magnet Base Khóa nhỏ Chức năng với lực hấp phụ (N): 250　TML-25

Small magnet base with lock function.
Can be used as a retainer for dial gauge, dial indicator, etc.

BIG DAISHOWA SEIKI Co., Ltd.

Archy Stands Lực hấp phụ (N): 500　AM-M

It is a flexible arm stand with secure lock by the patented cam mechanism.
Since the moving part is covered with rubber, it shuts out dust.

BIG DAISHOWA SEIKI Co., Ltd.

Archy đứng lực hấp phụ loại mạnh (N): 1000　ASP-M

It is a strong type that has become tough.
It is a flexible arm stand with secure lock by the patented cam mechanism.

BIG DAISHOWA SEIKI Co., Ltd.

Archy Stands mini Type Lực hấp phụ cánh tay ngắn (N): 350　AMM-M

The flexural rigidity of the short arm is greatly increased.
It is a flexible arm stand with secure lock by the patented cam mechanism.

BIG DAISHOWA SEIKI Co., Ltd.

Archy Stands mini Type Lực hấp phụ cánh tay dài (N): 350　AML-M

The flexural rigidity of the short arm is greatly increased.
It is a flexible arm stand with secure lock by the patented cam mechanism.

NOGAJAPAN Ltd.

Lực hấp phụ Popeye Flex (N): 320　NF1021

Since the gauge's fine motion feed device is located just above the magnet, zero point alignment of the gauge can be achieved instantly without shaking.
The fine adjustment screw can be moved all around so that the gauge can be inclined in any direction by 360°.

NOGAJAPAN Ltd.

Người giữ mini của lực hấp phụ thiết bị laser (N): 320

NOGAJAPAN Ltd.

Lực hấp phụ Popeye Flex (N): 320

NOGAJAPAN Ltd.

LC Mini Chủ của lực hấp phụ thiết bị Laser (N): 150　LC6200

By tightening the knob in the center, the three joints are locked tightly.
A mini holder with a round shape and powerful (20kgf) small magnet.

NOGAJAPAN Ltd.

Người giữ DG của Thiết bị Laser Lực hấp phụ điều chỉnh kép (N): 800　DG6160

By tightening the knob in the center, the three joints are locked tightly.
Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.

NOGAJAPAN Ltd.

Trọng lượng lớp Dial Gauge chủ Adsorption lực lượng (N): 800　MG61003

By tightening the knob in the center, the three joints are locked tightly.
The tip fine adjustment mechanism makes zero point alignment easy.

NOGAJAPAN Ltd.

Trọng lượng lớp Dial Gauge Chủ của Thiết bị Laser Lực hấp phụ (N): 800　MG10503

Since the one-touch hand fine motion feed mechanism is attached just above the magnet, the zero point alignment of the gauge can be made instantly without touching the arm.
The arm joint type holder tightens the knob in the center to firmly lock the three joints.

NOGAJAPAN Ltd.

Chai Lực hấp phụ (N): 1300　MA61003

The tip fine adjustment mechanism makes zero point alignment easy.
By tightening the knob in the center, the three joints are locked tightly.

TRUSCO NAKAYAMA CORPORATION

Trụ chính TM B-80

TRUSCO NAKAYAMA CORPORATION

TM L-25 cho đá nhỏ

Shinwa Rules Co., Ltd.

Magnet đứng một loại tiêu chuẩn

Shinwa Rules Co., Ltd.

Nam châm cột chính đứng cho cả A và A -2

KANETEC CO., LTD.

Magnet Vice　MPV4

Width (mm): 170
Depth (mm): 110

NOGAJAPAN Ltd.

Noga loại điều chỉnh kép MG Chủ của thiết bị Laser　MG6161

Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.
Test indicator and dial gauge holder.

NOGAJAPAN Ltd.

Noga kép điều chỉnh tốt loại NF chủ của thiết bị Laser　NF6160

Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.
Test indicator and dial gauge holder.

KANETEC CO., LTD.

Magnet Stand (Arm Type) High-Lock Mini Base with Fine Movement Adjuster Adsorption Force 160 N　MB-CX-V

Adsorption force (N): 160
Magnet Width (mm): 28

KANETEC CO., LTD.

Magnet Stand (Arm Type) High-Lock Mini Base with Fine Movement Adjuster Adsorption Force 300 N　MB-PSX-V

Adsorption force (N): 300
Magnet Width (mm): 30

KANETEC CO., LTD.

Magnet Base　MBS12B

Quantity: 1 Piece
Adsorption force (N): 250

KANETEC CO., LTD.

Flexible nozzle Holder　NHM1

Quantity: 1 unit
Adsorption force (N): 245

Mitutoyo Corporation

Khối đo thép cá nhân BM1 611736-04

KANETEC CO., LTD.

Cơ sở nam châm　MB-A2

Since two arms are provided for one base, it takes no space to install the base when performing simultaneous measurement of two points.
Mounting holes are also provided on the side of the base for various measurements.