Snap-on Tools Japan K.K.

Tấm vải TOP Corporation vít Kích thước: 3/8 24 phạm vi điều chỉnh (inch): 0,001.Red jumbo

Snap-on Tools Japan K.K.

Counter Sink Integral Pilot Đường kính lưỡi hiệu quả (inch): 3/32 Số lưỡi dao: 3

Snap-on Tools Japan K.K.

Bộ thí điểm tích hợp bộ đếm chìm 3/32, 1/8, 5/32, 3/16　ATI420D-4PC

NATO stock number.
High concentric quality achieved by carving.

TRUSCO NAKAYAMA CORPORATION

Người đàn ông đẹp G Titanium coating Đường kính lưỡi hiệu quả: 15 Đường kính chân: 6

Counter Sink Ti Coat góc: 90 Đường kính lưỡi hiệu quả: 6,3

TRUSCO NAKAYAMA CORPORATION

Bộ đếm Bộ tản nhiệt Ti Coat 6 bộ Lớp phủ titan Φ6.3, 8.3, 10.4, 12.4, 16.5, 20.5　TSCSC

High Speed Steel is used as the base material and has excellent wear and heat resistance.
Surface hardness is high by surface titanium coating treatment, and heat and wear resistance and sharpness are improved compared with high speed.

TRUSCO NAKAYAMA CORPORATION

Counter Sink tay cầm cho 8mm

Walter Japan KK

Counter Sink Ti Coat góc: 90 Đường kính lưỡi hiệu quả: 6,3

NOGAJAPAN Ltd.

Counter Sink Đặt 3 lưỡi Ti góc đầu phủ: 90 Φ6.3, Φ10.4, Φ16.5, Φ20.5, Φ25.0　CJ5154T

Heat treated high speed steel is bladed with CBN polishing.
It is a deep and sharp cutting edge.

NOGAJAPAN Ltd.

Counter Sink Đặt 3 lưỡi Ti góc đầu phủ: 90 Φ6.3, Φ8.3, Φ10.4, Φ12.4, Φ16.5, Φ20.5　CJ6152T

Heat treated high speed steel is bladed with CBN polishing.
It is a deep and sharp cutting edge.

ILIX Prazisionswerkzeuge GmbH

Bộ đếm Bộ đếm 4 bộ Lớp phủ DLC Φ16.5, 20.5, 25.0, 37.0　6277-LSDC

Excellent adhesion prevention and low friction characteristic of DLC (Diamond-Like Carbon Coat) allows for excellent efficiency and finish surface processing.
Work Material: Aluminum Alloy/Copper Alloy.

Walter Japan KK

Góc nghiêng Counter Sink: 90 Đường kính lưỡi hiệu quả: 4,3

TRUSCO NAKAYAMA CORPORATION

Counter Sink Cobalt HSS góc nhọn: 90 Đường kính lưỡi hiệu quả: 6,3

TRUSCO NAKAYAMA CORPORATION

Bộ đếm Cobalt HSS Bộ 6 bộ Không phủ Φ6.3, 8.3, 10.4, 12.4, 16.5, 20.5　TSCS

Uses cobalt high speed steel as the base material and has excellent wear and heat resistance.
With the use of 3 blades, the cutting powder is well drained and the finish is beautiful.

NOGAJAPAN Ltd.

Counter Sink Cobalt HSS 3 lưỡi góc: 90 Đường kính lưỡi hiệu quả: 6,3

NOGAJAPAN Ltd.

Bê tông Carbide Counter Sink 3 lưỡi góc: 90 Đường kính lưỡi hiệu quả: 6,3

ONISHI MANUFACTURING Co., Ltd.

Máy khoan trục Hex trong chiều dài rãnh khoan 15 Đường kính lưỡi hiệu quả: 9,0

ONISHI MANUFACTURING Co., Ltd.

Máy cắt khoan chỉ trong khoan (L 15mm) 3.0mm

STAR-M Corporation

HSS chamfer Cutter góc: 90 Đường kính lưỡi hiệu quả: 6

YAMAWA MFG. Co., Ltd.

Góc nghiêng (HSS): 90 Đường kính lưỡi hiệu quả: 6

RUKO

Hex Shank Counter Sink Không Coat Góc Mẹo: 90 Đường kính lưỡi hiệu quả: 6,3

RUKO

Hex Shank Counter Chìm Ti Coat Mẹo góc: 90 Đường kính lưỡi hiệu quả: 6,3

Fukudaseiko

Trung tâm Reaming SKH51 góc đầu: 60 Đường kính lưỡi hiệu quả: 6

Walter Japan KK

Bộ chuyển đổi DIN 6535 HA AK610.Z12.E12.022

Walter Japan KK

Đối tác HSS E681812.5

Walter Japan KK

Máy đếm tiền HSS E6819TIN10

Walter Japan KK

Đối tác HSS E781816

RUKO

Counter Sink "tấm nhanh" Titan nhôm 19.0mm

RUKO

Counter Sink "tấm nhanh" 23.0mm

MAPAL KK

MEGA-Countersink (CDS110) không đồng đều phút 3 lưỡi　COS110-0630-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) không đồng đều phút 3 lưỡi　COS110-1040-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) không đồng đều phút 3 lưỡi　COS110-1650-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) không đồng đều phút 3 lưỡi　COS110-2050-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) không đồng đều phút 3 lưỡi　COS110-2500-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) không đồng đều phút 3 lưỡi　COS110-6.3-25-335C-SP345-SET

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

TRUSCO NAKAYAMA CORPORATION

Bồn rửa chén Cobalt HSS 4.3mm　TCS43

Uses cobalt high speed steel as the base material and has excellent wear and heat resistance.
With the use of 3 blades, it has a beautiful finish with good powder removal.

TRUSCO NAKAYAMA CORPORATION

Bộ đếm Bồn rửa Titan nitride Alumina 10,4mm　TCSA104

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.

TRUSCO NAKAYAMA CORPORATION

Bộ đếm Bồn rửa Titan nitride Alumina 12,4mm　TCSA124

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.

TRUSCO NAKAYAMA CORPORATION

Bộ đếm Bồn rửa Titan nitride Alumina 16,5mm　TCSA165

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.

TRUSCO NAKAYAMA CORPORATION

Bộ đếm Bồn rửa Titan nitride Alumina 20,5mm　TCSA205

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.